• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.385-389
• /
• 2003

In this paper, an improved technique for multiresolutive reconstruction of magnetoencephalography (MEG) source distribution is proposed. Using the proposed technique, focal solution with higher energy density can be reconstructed. Moreover, the proposed approach is very easy to implement compared to conventional ones. The usefulness of the proposed technique is verified by the application to a real brain model.

• Journal of applied mathematics & informatics
• /
• v.26 no.1_2
• /
• pp.235-249
• /
• 2008

On-demand routing protocol in ad hoc network is that establishes a route to a destination node only when it is required by a source node. But, it is necessary to reestablish a new route when an active route breaks down. The reconstruction process establishes another route by flooding messages from the source to the destination, cause not only heavy traffic but also long delays in route discovery. A good method for analyzing performance of protocols is important for deriving better systems. In this paper, we suggest the numerical formulas of a representative on-demand routing protocol AODV, ARMP, and RRAODV to estimate the performance of these routing protocols for analyzing the performance of these protocols. The proposed analytical models are very simple and straightforward. The results of analysis show good agreement with the results of computer simulations.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.475-477
• /
• 2002

Mobile ad hoc network은 관리나 표준화된 지원 서비스 없이 무선 이동 노드들만으로 구성되는 임시적인 망이다. Mobile ad hoc network에서는 노드들의 이동성으로 인해 각각의 노드들이 경로를 결정하고, 경로가 무효화되었을 때 빠르고 효과적으로 복구하는 것이 중요하다. 본 논문에서는 On-Demand 방식의 대표적인 프로토콜인 AODV에서 경로 설정 과정과 경로 파손이 발생했을 때 경로 재설정 과정을 알아보고, 액티브 경로의 길이가 망의 직경에 가깝게 확장되어 졌을 경우에 경로 설정 과정에서 흡수를 이용해 mark-up 한 노드들과 RREP 전송과정에서 mark-up한 노드에 의한 부분적인 다중 경로를 설정함으로서 보다 효과적이긴 신뢰성 있는 새로운 경로 재설정 기법을 제안한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.213-216
• /
• 2004

본 연구에서는 복잡한 형상을 가진 음원으로부터 방사하는 음장을 등가음원법 (equivalent source method)을 이용하여 재구성한다. 일반적인 등가음원법의 기본 원리는 진동하는 물체의 표면 또는 내부에 등가음원을 분포시켜서 등가음원의 강도를 계산하는 방법이다. 각 등가음원의 강도는 음원의 경계 조건이나 측정된 음장 음압을 통해서 구할 수가 있으며 사용된 등가음원의 차수, 개수 그리고 위치 등은 고려되어야 할 중요한 변수들이다. 기존의 HELS (Helmholtz equation least square) 방법은 한 곳의 위치에 다양한 차수로 이루어진 등가음원을 사용하여 각 차수의 계수를 구하는 방법으로써 구형에 가까운 음원에 대해서 좋은 결과를 보이나 음장의 결과가 최대 차수의 선택에 따라서 큰 오차를 유발하는 문제점이 있다. 따라서 정규화 기법을 사용하여 음장을 재구성하기 위해 필요한 등가음원의 최적 차수를 구하고, 음원 내부에 최적 차수로 이루어진 등가음원을 여러 개의 점에 위치시켜서 재구성 정확도를 향상시켰다. 정규화된 등가음원법의 타당성 검증을 위하여 표면 일부가 진동하는 구에 대한 수치 해석 및 청소기 모델에 대한 음장 재구성 실험 을 수행하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.4
• /
• pp.188-200
• /
• 2001

This paper presents a technique for reconstructing converter line currents using the information from a single current sensor in the DC-link for voltage-source PWM converters. When three-Phase input currents cannot be reconstructed, three methods to acquire the input current are compared. Two of them are methods of modifying the switching state (I, II), another is a method of using the predictive state observer. Also, compensation of sampling delay, and a simultaneous sample value of input currents in the center of a switching period are included. Suitable criteria for the comparison are identified, and the differences in the performance of these methods are investigated through experimental results for a typical V-S PWM converter rated at 10kVA.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1609-1614
• /
• 2003

In this study, a practical holographic interferometric tomography system, which is instantaneous and non-contact for measuring three dimensional flow field, was developed. The system consists of holographic recording/reconstruction system, fringe analysis code and computational tomography code and it is developed with Gill environment for general users. The developed system was applied to three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multi-directional holographic interferograms was recorded by employing a double-reference beam, double-exposure holographic technique. Optical pathlength data were extracted from the recorded interferometric data and finally three dimensional temperature field inside the cube was reconstructed.

• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.435-440
• /
• 1998

The main objective of this study is to estimate location and strength of sound sources distributed on the surface of an enclosure. Acoustic holography method has been used to identify the sources in an interior sound field. However, it can not completely distinguish between the direct sound field from sources and the reflections from surfaces. The method just reconstructs the entire sound field based on the sound pressure at the finite number of measurement points. In this stduy, a method which estimates only the active sources by using measurements of field pressure and surface admittance is proposed. An in-situ technique to estimate the general boundary condition is also proposed by using acoustic holography, assuming the surfaces are locally reacting.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.592-600
• /
• 2000

In this paper, a novel control scheme of three-phase PWM rectifiers using only dc-side sensors is proposed. The phase currents are reconstructed from switching states of the rectifier and the dc output current. For effective current control, the currents are estimated by a predictive state observer. Also, both the phase angle and the magnitude of the source voltage are estimated by controlling the deviation between the model current and the system current to be zero. The validity of the proposed ac phase and current sensorless technique has been verified by experimental results.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.19 no.1
• /
• pp.16-20
• /
• 2008

Excising part or all part of a larynx as a cancer operation results in changes that transgress anatomic, physiologic, psychologic, and social priciples. The quality of life of a patient's life after any given cancer surgery usually is regarded as a second-priority consideration after oncologic safety. With laryngeal surgery, excision of malignant disease typically results in change that significantly influence an individual for the duration of his or her life. Nonetheless, with appropriate rehabilitation the surgical side effects can be minimized to allow for an excellent quality of life. Successful conservation surgery for laryngeal cancer requires careful interdependent selection for patients, lesions and procedure. The technical goal is to minimize trauma to uninvolved tissue and to wisely utilized local tissues or tree flap for reconstruction, while insuring for oncologically sound procedure. Rehabilitation should aim to produce a glottal sound source if possible, however voice therapy to promote false vocal fold vibration and arytenoid to epiglottis source of vibration can produce very satisfactory phonatory results.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.274-281
• /
• 1995

The new method of recording and reconstructing a synthetic object, which was called as scannedobject holography (SOH), was proposed and its feasibility was demonstrated theoretically and experimentally. The hologram was recorded by interfering the fixed reference beam with spherical waves emitting from a moving point source, whose trajectory determined the shape of the synthetic object to be recorded. The end face of an optical fiber and the output from a pulsed laser were utilized in order to implement a moving point source experimentally. tally.