• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.04a
• /
• pp.37-46
• /
• 1998

Several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation by biezocone excess pore water dissipation test in soft clay deposits. However, depending on the assumptions and analytical techniques, the estimated coefficient of consolidation could be in a considerably wide range even for a specific degree of consolidation. These solutions are obtained from an initial excess porewater pressure distribution which can be determined from. either the cavity expansion theory or the strain path method. The 야ssipation of the initial excess porelvater pressure has been usally simulated by means of linear-uncoupled consolidation analysis and then the dissipation curve is normalized by the initial excess porewater pressure for easy use. However. since there is no guidelines or rules on which method gives the best solution for obtaining the coefficient of consolidation from the dissipation curve, the final selection was only based on engineer's extrience and Judgements. Thus, such an arbitrary selection might be inappropriate for a specific site to characterize the consolidation behavior. In this paper, we reviewed various theoretical time factors and, based on this consideration, we mentioned needs for researches in selecting a specific solution that is compatible for Korean clays. Also we listed some source of errors that can be encountered in the procedure of dissipation analysis.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.274-279
• /
• 1996

Diffusion coefficient is a critical parameter for predicting radiological source term(migration rate and flux of radionuclide) through given near field conditions in spent fuel or high level waste repository. The effect of exchangeable cation-$Na^+$ and $Ca^{2+} - on the diffusion of $I^- \;and^3H$ (as HTO) in compacted bentonite was examined using a through-diffusion method. Bentonite material used here was compacted to a density of 1.3 Mg/m$^3$, and Na-bentonite was saturated with a solution of 100 mol NaCl/m$^3$ and Ca-bentonite with 50 $mol\;CaCl_2$/m$^3$. The results show that effective diffusion coefficients are generally higher by a factor of two to five in Ca-than Na-clay. This is attributed to the larger particle size of Ca-compared to Na-bentonite; hence, Ca-bentonite has a greater proportion of relatively large pores, which make a greater contribution to mass transport than small pores. Although the nature of the exchangeable cation affects mass diffusion in compacted bentonite, the effect is small and not likely to influence performance assessment modeling of compacted bentonite-based barriers.

• Korean Journal of Materials Research
• /
• v.21 no.12
• /
• pp.679-684
• /
• 2011

One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The purpose of the present study was to investigate leaching properties of water-soluble hexavalent chromium by different manufacturing conditions of cement clinker. Raw materials were prepared to add different $SiO_2$, $Al_2O_3$ and $Fe_2O_3$ sources. After the raw materials, such as limestone, sand and clay, iron ore was pulverized and mixed, and the raw meal was burnt at $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. Leaching of soluble hexavalent chromium showed a tendency to decrease with an increasing LSF and IM. However, leaching of soluble hexavalent chromium increased with an increasing S.M. Alkali contents of iron source minerals is closely related to the leaching properties of soluble hexavalent chromium. Green sludge has the highest content of alkali added; leaching of water-soluble hexavalent chromium was mostly high. In order to reduce the water-soluble hexavalent chromium in cement, reducing the alkali content in raw materials is important.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.23-39
• /
• 2014

An artificial rainwater reservoir installed in urban areas for recycling rainwater is an eco-friendly facility for reducing storm water effluence. However, in order to recycle the rainwater directly, the artificial rainwater reservoir requires an auxiliary system that can remove non-point source pollutants included in the initial rainfall of urban area. Therefore, the conventional soil filtration technology is adopted to capture non-point source pollutants in an economical and efficient way in the purification system of artificial rainwater reservoirs. In order to satisfy such a demand, clogging characteristics of the sand filter layers with different grain-size distributions were studied with real non-point source pollutants. For this, a series of lab-scale chamber tests were conducted to make a prediction model for removal of non-point source pollutants, based on the clogging theory. The laboratory chamber experiments were carried out by permeating two types of artificially contaminated water through five different types of sand filter layers with different grain-size distributions. The two artificial contaminated waters were made by fine marine-clay particles and real non-point source pollutants collected from motorcar roads of Seoul, Korea. In the laboratory chamber experiments, the concentrations of the artificial contaminated water were measured in terms of TSS (Total Suspended Solids) and COD (Chemical Oxygen Demand) and compared with each other to evaluate the performance of sand filter layers. In addition, the accumulated weight of pollutant particles clogged in the sand filter layers was estimated. This paper suggests a prediction model for removal of non-point source pollutants with theoretical consideration of the physical characteristics such as the grain-size distribution and composition, and change in the hydraulic conductivity and porosity of sand filter layers. The lumped parameter ${\theta}$ related with the clogging property was estimated by comparing the accumulated weight of pollutant particles obtained from the laboratory chamber experiments and calculated from the prediction model based on the clogging theory. It is found that the lumped parameter ${\theta}$ has a significant influence on the amount of the pollutant particles clogged in the pores of sand filter layers. In conclusion, according to the clogging prediction model, a double-sand-filter layer consisting of two separate layers: the upper sand-filter layer with the effective particle size of 1.49 mm and the lower sand-filter layer with the effective particle size of 0.93 mm, is proposed as the optimum system for removing non-point source pollutants in the field-sized artificial rainwater reservoir.

• The Korean Journal of Ecology
• /
• v.24 no.5
• /
• pp.289-296
• /
• 2001

Community structure of the Salix and physico-chemical properties of sediment were studied from July to September, 2000 in Nam-River watershed for the purpose of inquiring niche breadth, niche overlap and the environmental factors affecting the distribution of Salix species. Among eleven Salix species, the dominant species was Salix koreensis, while the rests were such order as S. nipponica, S. gracilistyla and S. glandulosa by the relative abundance based on the basal area. Mean values and the ranges of sediment properties such as pH, conductivity, water content, organic matter, total nitrogen, available phosphorus, clay, silt and sand were 5.3∼6.3, 14∼351 μmho/cm, 0.1∼3.4%, 0.5∼7.3%, 0.01∼0.2%, 0.1∼0.4 mg/100 g, 1.7∼22.0%, 0.2∼40.8%, 39.7∼98.0%, respectively. Altitude and annual mean temperature of each site were 20∼620 m and 9.3∼13.0℃, respectively. Niche breadth was estimated by considering the differences of the soil texture as the differences of state of source. S. glandulosa was the broadest at the level of 0.77, while the rests were such order as S. koreensis, S. nipponica were 0.69, 0.54, respectively. The niche overlap showing the level of interspecific competition was the largest as 0.94 between S. purpurea var. japonica and S. purpurea var multinervis, while S. graciliglans and S. purpurea var. japonica 0.92, S. graciliglans and S. purpurea var. multinervis 0.87, respectively. According to the analysis of the correlation between eleven species of Salix and eleven environmental factors, S. gracilistyla showed the negative correlation with conductivity, water content, total nitrogen, clay, silt and annual mean temperature, and showed the positive correlation with total nitrogen, sand and altitude. S. graciliglans showed the negative correlation with conductivity, water content, organic matter, clay, silt and annual mean temperature, and showed the positive correlation with total nitrogen, sand and altitude. S. nipponica showed the negative correlation with sand and altitude, and showed the positive correlation with water content, total nitrogen, clay, silt and annual mean temperature. S. nipponica showed the opposite results of S. gracilistyla. Soil texture, total nitrogen, water content, altitude and annual mean temperature were affecting the distribution of Salix species in Nam-River watershed.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.11-23
• /
• 1986

Soils and rice plants in wastewater irrigated area of the Mangyeong River receiving waster from the Jeonju Industrial Complex and municipal sewage were sampled at two depths to assess the nature and content of Cd, Cu, Pb and Zn, particularly with respect to distance from wastewater source. For metal levels of soils in these area, no difference in the heavy metal contents between the surface and the subsurface soils was found. Total contents of Cu, Pb and Zn in soils were negatively correlated with distance from the source. A positive correlation was found between contents of total and 0.1N-HCl extractable or $1N-CH_3COONH_4$ extractable heavy metals in surface soils of these area. Total contents of heavy metals in soils were positively correlated with clay, soil organic matter and cation exchange capacity. Heavy metal contents of brown rice sampled at the Jeon-ju Industrial Complex area ranged from 0.15 to 0.91 ppm for Cd, from 1.13 to 5.68 ppm for Cu, from 0.22 to 7.16 ppm for Pb and from 11.74 to 38.66 ppm for Zn. Negative correlation was found between the contents of Cd, Cu, Pb, and Zn in the brown rice and the distance from the source. The contents of Cd, Cu and Zn in rice straw were positively correlated with those in the brown rice.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.2
• /
• pp.72-77
• /
• 1993

This study was conducted to evaluate coated urea complex fertilizer (CUC) application for rice growth and its grain quality on clay loam (Deogpyeong series) and sandy loam (Gangseo series) in southern region of Korea, 1992. The coated urea complex fertilizer used in the experiment was CUC I and II. The CUC I is a complex fertilizer consisting of 18-12-13 for $N-P_2O_5-K_2O$ including 50% of coated urea as nitrogen source, and CUC II is the same complex fertilize as mentioned above but it contains 25% of coated urea. Seventy percent of conventional fertilizer for nitrogen level was applied as basal dose of side-band placement (SBP) and whole plowlayer placement (WPP). Greenish degree of rice leaf color at the late growth stage was high in CUC plots regardless of application method and soil series. Amount of nitrogen uptaken by the rice plant at harvesting stage was mush more in the CUC treatment compared to convential fertilizer, and also much more in CUC I than that of CUC II. In the WPP on clay loam, harvest index of CUC treatment was showed very low level, which was reduced more in CUC II plot. In the CUC treatments, perfect rice grain ratio decreased remarkably, and the notched-belly rice kernel ratios among imperfect rice grain increased drastically. In rice grain, Hon-value(Mg to K.N ratio) decreased, protein and amylose contents increased in CUC application plots in WPP. In addition, gel consitency and alkali spreading value related to eating quality in CUC plots were getting longer and lower, respectively. The yield in CUC plot was similar to conventional fertilizing, but significant decreased in SBP. As a result, the rice grain quality became poor with the coated urea complex fertilizer application, but it could be improved by incorporation with fast-release fertilizer.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.83-93
• /
• 2015

This study investigated genetic, mineralogical and spectral characteristics of oil shale and coal samples in Dundgobi area, Mongolia. Based the Rock/Eval and Total organic carbon (TOC) analysis, kerogen type, hydrogen quantity, thermal maturity and depositional environment were confirmed. Moreover, the mineral composition of oil shale and coal samples were analyzed by XRD and spectroscopy. The result of Rock Eval/TOC analysis revealed that the samples of Eedemt deposit are immature to mature source rocks with sufficient hydrocarbon potential, and the kerogen types were classified as Type I, Type II and Type III kerogen. On the other hand, the samples from Shine Us Khudag deposit were mature with good to very good hydrocarbon potential rocks where kengen types are defined as Type I, Type II/III and Type III kerogen. According to the carbon and sulfur contents, the depositional environment of the both sites were defined as a freshwater depositional environment. The XRD analysis revealed that the mineral composition of oil shale and coal samples were quartz, calcite, dolomite, illite, kaolinite, montmorillonite, anorthoclase, albite, microcline, orthoclase and analcime. The absorption features of oil shale samples were at 1412 nm and 1907 nm by clay minerals and water, 2206 nm by clay minerals of kaolinite and montmorillonite and 2306 nm by dolomite. It is considered that spectral characteristics on organic matter content test must be tested for oil shale exploration using remote sensing techniques.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.519-536
• /
• 2008

The relatively tranquil area within the Gogunsan Archipelago was for the first time investigated preliminarily with respect to modern sedimentological processes in association with the emplacement of the Saemangeum Dyke. Basic sedimentological observations, bathymetry and surface sediments were performed twice during 2006-2008 to compare the results and elaborate changes during that period of time. In addition, sediment dynamical observations were carried out with latest measuring equipment along two transects crossing the entrances of the archipelago, including 12-hour onboard measurements of current, suspended sediments, temperature, and salinity. This dataset was used to reveal hydrodynamic characteristics for spring season April-May and to estimate the direction and relative magnitude of the net flux of suspended sediments. There occurred three depositional areas (A to C) within the archipelago, where sediment texture was also changed. In area A, around Yami Island and the dyke, and area B, in the center of the archipelago, surface sediments became coarsened over the two-year period; sand content increased 5% at the expense of silt content in the former, whereas silt content increased 3% at the expense of clay content in the latter. By comparison, area C in the western entrance of the archipelago shows a textural trend of fining with more silt and clay (combined increase of 5%) at the expense of sand content. The accumulation of sediments in areas A and B is attributable to the sand and silt resuspended from the seabed sediments off sector 4 of the dyke during the winter. The origin of the fine materials depositing on area C is uncertain at present, although suspended sediments moving offshore around the archipelago may be one of the most likely candidates for the source. The temperature of seawater increased rapidly from $9-10^{\circ}C$ in April to $14-16^{\circ}C$ in May, whereas salinity remained more or less constant at 31-32%o during the two months. Both of these parameters showed little variations with depth through a tidal cycle, suggesting good mixing of seawater without any help of significant waves. The consistency of salinity during a tidal cycle also indicates no insignificant effects of freshwater from the rivers Mangyung and Donjin emitting through the opening gap near Sinsi Island. The suspended sediment concentrations were higher at the entrance between Sunyu and Sinsi islands than at the entrance between Hoenggyong and Sinsi islands, ranging from 20 and 30 mg/l and from 5 and 15 mg/l, respectively at the sea surface. Although tidal currents were variable across a transect between Sunyu and Sinsi islands, the currents across the entrance between Hoenggyong and Sinsi islands flowed consistently in the same direction all over the transect during a tidal cycle. The estimation of net flux of suspended sediments indicates that suspended sediments are transferred to the Gogunsan Archipelago mainly through a relatively deep trough adjacent to Sinsi Island toward the shallow area around Yami Island and the dyke.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.443-455
• /
• 2015

To verifying the stability of Natural pigments for Dancheong which is available on the market was carried out as light resistance and gas corrosion test. In this particular case, we will confirm the characteristics of the only pigments except of Dancheong technique and influence of substance. Medium using for coloring are animal glue and synthetic resin that widely used for Dancheong in currently. Selected to artificial light source is a xenon arc lamp, contaminated gas is nitrogen dioxide gas in experiment. Degree of degradation of pigment were compared by measuring the degree of color change. The result of light resistance test, mineral pigments were good; color is green and blue type, soil pigments also good; color is yellow ocher, white clay, red clay etc. Gamboge, unghwang, cinnabar, red lead were confirmed not good. The result of gas corrosion test, most of the natural pigments were good condition except the red lead. Generally, animal glue samples had better than a synthetic resin samples.