• 한국물환경학회지
• /
• 제36권1호
• /
• pp.29-35
• /
• 2020

To manage the non-point source pollution and restore the water circulation, many technologies including infiltration or reservoir systems were installed in the urban area. These facilities have many problems regarding maintenance as their operation period becomes lengthier. The purpose of this study was to estimate the optimal maintenance timing through a long-term load test on the infiltration trench as one of the low impact development techniques. An infiltration trench was installed in the demonstration test facility, and stormwater was manufactured by Manual on installation and operation of non-point pollution management facilities from the Ministry of Environment, Korea and entered into the infiltration trench. Particle size distribution (PSD), suspended solids (SS) removal efficiency, and infiltration rate change tests were performed on inflow and outflow water. In case of the PSD, the maximum particulate size in the outflow decreased from 64 ㎛ to 33 ㎛ as the operating duration elapsed. The SS removal efficiency improved from 97 % to 99 %. The infiltration rate changed from 0.113 L/sec to 0.015 L/sec during the operation duration. The maintenance timing was determined based on the stormwater runoff requirements with these changes in water quality and infiltration rate. The methodologies in this study could be used to estimate the timing of maintenance of other low impact development techniques.

• 환경영향평가
• /
• 제12권3호
• /
• pp.189-198
• /
• 2003

본 연구는 수지해석(數値解析)을 이용하여 상관우물들의 분포를 갖는 집수역에서 수질을 고려하지 않은 상태의 지하수양수능을 평가하는 것을 목적으로 한다. 연구지역은 일본(日本)의 미야께지마(삼탁도)이며, 미야께지마는 최근에 이르기까지 화산분화(火山噴火)가 계속되고 있는 화산섬으로 수문지질학적(水文地質學的)으로 매우 복잡한 구조를 갖고 있다. 각각의 우물들에 대한 양수능은 개별(個別)양수에 의해서 구해진 IMY(i,t)로써 추정되었으며, 전(全) 연구지역의 양수능은 개별(個別)양수에 의해서 구해진SSMY(i,t)로써 추정되었다. 이러한 결과들은 미야께지마와 같은 화산섬에서 용수(用水)공급을 위한 계획의 수립에 있어서 확실한 공급원의 확보에 이용될 수 있다. 동시양수의 경우, 우물 5와 6에서의 양수는 타이로이께(대로지(大路池))부근에 존재하던 지하수가 연구지역의 내부에 까지 침투하는 것에 대한 장해(障害)우물로써 작용했다. 그러므로, 본 연구는 질적(質的), 양적(量的) 측면에서 용수공급을 위한 지하수의 최적(最適)관리방법으로써 동시양수를 제안한다.

• 한국농공학회지
• /
• 제32권E호
• /
• pp.1-19
• /
• 1990

Abstract Over the last several decades, crop production in the United States increased largely due to the extensive use of animal waste and fertilizers as plant nutrient supplements, and pesticides for crops pests and weed control. Without the application of animal waste best management, the use of animal waste can result in nonpoint source pollution from agricultural land area. In order to increase nutrient levels and decrease contamination from agricultural lands, nonpoint source pollution is responsible for water quality degradation. Nonpoint source pollutants such as animal waste, ferilizers, and pesticides are transported primarily through runoff from agricultural areas. Nutrients, primarily nitrogen and phosphorus, can be a major water quality problem because they cause eutrophic algae growth. In 1985, it was presented that Watershed/Water Quality Monitoring for Evaluation BMP Effectiveness was implemented for Nomini Creek Watershed, located in Westmoreland County, Virginia. The watershed is predominantly agricultural and has an aerial extent of 1505 ha of land, with 43% under cropland, 54% under woodland, and 3% as homestead and roads. Rainfall data was collected at the watershed from raingages located at sites PNI through PN 7. Streams at stations QN I and QN2 were being measured with V-notch weirs. Water levels at the stream was measured using an FW-l Belfort (Friez FWl). The water quality monitoring system was designed to provide comprehensive assessment of the quality of storm runoff and baseflow as influenced by changes in landuse, agronomic, and cultural practices ill the watershed. As this study was concerned with the Nomini Creek Watershed, the separation of storm runoff and baseflow measured at QNI and QN2 was given by the master depletion curve method, and the loadings of baseflow and storm runoff for TN (Total Nitrogen) and TP (Total Phosphorus) were analyzed from 1987 through 1989. The results were studied for the best management practices to reduce contamination and loss of nutrients, (e.g., total nitrogen and total phosphorus) by nonpoint source pollution from agricultural lands.

• 환경영향평가
• /
• 제27권5호
• /
• pp.431-446
• /
• 2018

본 연구에서는 충청남도 논산시 농촌지역의 대기 중 블랙카본, 이온, 금속원소 등을 포함한 $PM_{2.5}$의 화학적 특성을 규명하고 $PM_{2.5}$의 오염원을 정량적으로 평가하였다. 분석의 정도관리를 평가한 결과, 금속원소를 포함한 대부분의 미량성분의 분석값은 상대오차와 상대표준편차가 10% 미만이었다. 농촌지역의 $PM_{2.5}$의 평균 농도($20.1{\pm}10.1{\mu}g/m^3$)는 2018년에 강화된 연평균 기준을 초과하는 수준이었다. $PM_{2.5}$와 탄소 및 이온성분은 서로 유의한 상관성을 보였고, 미량성분의 농도는 $10^{-3}{\sim}10^4ng/m^3$ 범위인 것으로 나타났다. 양의 인자 분석법(PMF, Positive Matrix Factorization)을 이용하여 오염원을 평가한 결과, 농촌지역의 $PM_{2.5}$의 오염원은 secondary aerosol(34.4%), soil/road dust(20.1%), biomass burning(16.9%), incineration/fuel combustion(13.2%), vehicle exhaust(12.2%), sea-salt(3.17%) 이었다. 도시지역과 달리 농촌지역은 연소와 관련된 오염원이 중요하였고 따라서, 농촌지역의 관리 대상 오염원으로서 불법소각은 세심한 대책을 필요로 한다.

• 한국환경생태학회지
• /
• 제26권2호
• /
• pp.233-246
• /
• 2012

본 연구는 농업용 저수지의 유역권(약 1,500ha) 중 직접 영향을 미칠 수 있는 도시화지역, 농경지 등, 대상지 일대의 생태적 특성을 분석한 후, 이를 바탕으로 생물다양성의 선결과제인 수질관리를 위한 유역권 생태계 관리방안을 제안하였다. 대상지 유역생태계 토지이용현황 분석결과 시가화지역(14.0%)에 의한 수질오염 가능성이 가장 높았고 유형별 분포는 상류에 대면적으로 분포하는 논(65.0%), 밭(11.3%), 시설경작지(5.7%), 과수원(3.9%) 등의 순이었다. 관리를 위해 수질에 영향을 미치는 정도를 평가한 비오톱 유형평가와 오염원 관리 우선정도를 평가한 수계권역 평가를 고려하여 5개 유형으로 구분한 결과, 수변에 인접한 오염원집중관리지역(11.3%)과 오염물질을 유발하고 있으나 수변에서 떨어져 있는 오염원관리지역(0.6%)에 대한 관심이 필요하였다. 관리는 저수지 생물서식 기능 향상 및 유역권 관리를 통한 환경친화적 호소관리를 통한 생물다양성 증진, 생태계 보전 및 복원방안을 제안하였다.

• 웰빙융합연구
• /
• 제7권4호
• /
• pp.29-37
• /
• 2024

Purpose: This study aims to understand the types and amounts of greenhouse gases among substances generated when operating facilities at resource recovery facilities in Seoul and analyze their impact on the environment. Research design, data and methodology: As a research method, you can directly visit four resource recovery facilities in Seoul, investigate greenhouse gases generated when operating the facilities, and then understand the distribution of generation through the greenhouse gas calculation formula. In addition, the impact, distribution, etc. that they have regionally can be confirmed by comparing the emission source and the surrounding site boundary line through the environmental impact survey report Results: When operating resource recovery facilities, you can determine whether there is a possibility that they will actually affect the surrounding areas, especially in areas where humans reside, such as private homes and vulnerable facilities, and if so, the results can be determined. The goal of this study is to understand how much the effects of greenhouse gases contribute to climate change and what the effects are on the human body. Conclusions: he results of this study can identify the causes of negative images of the survival of resource recovery facilities and the expansion and establishment of new resource recovery facilities, and suggest eco-friendly measures such as waste export, recycling, and recycling instead of new construction on the impact on climate change.

• 한국농공학회논문집
• /
• 제55권1호
• /
• pp.17-29
• /
• 2013

Long-Term Hydrologic Impact Assessment (L-THIA) model which is a distributed watershed model was applied to analyze the spatial distribution of surface runoff and nonpoint source pollutant loading from Imha watershed during 2001~2010. L-THIA CN Calibration Tool linked with SCE-UA was developed to calibrate surface runoff automatically. Calibration (2001~2005) and validation (2006~2010) of monthly surface runoff were represented as 'very good' model performance showing 0.91 for calibration and 0.89 for validation as Nash-Sutcliffe (NS) values. Average annual surface runoff from Imha watershed was 218.4 mm and Banbyun subwatershed was much more than other watersheds due to poor hydrologic condition. Average annual nonpoint source pollutant loading from Imha wateshed were 2,295 ton/year for $BOD_5$, 14,752 ton/year for SS, 358 ton/year for T-N, and 79 ton/year for T-P. Amount of pollutant loading and pollutant loading rates from Banbyun watershed were much higher than other watersheds. As results of analysis of loading rate from grid size ($30m{\times}30m$), most of high 10 % of loading rate were generated from upland. Therefore, major hot spot area to manage nonpoint source pollution in Imha watershed is the combination of upland and Banbyun subwatershed. L-THIA model is easy to use and prepare input file and useful tool to manage nonpoint source pollution at screening level.

• 한국전산구조공학회논문집
• /
• 제28권6호
• /
• pp.659-666
• /
• 2015

본 논문에서는 콘크리트 구조물의 층상박리균열 위에서의 손상탐지에 효율적인 충격반향기법에 대해 영향을 끼치는 다양한 영향요소들에 대한 분석을 수행하였다. 충격반향기법에서의 균열 가시화를 위해 층상박리균열위의 동적거동 및 두께를 나타내는 휨 모드 및 충격반향모드(두께 모드)에 영향을 끼치는 균열의 폭/두께(a/h) 비, 균열위의 상대적 가진 점, 측정 점의 위치 등의 시험설정 변수 등을 매개변수적 유한요소해석을 통하여 조사하였다. a/h비는 2보다 클 경우 휨 모드가 지배적이었으며 작을 경우 두께 모드가 지배적이었다. 또한 가진 점, 측정 점 중 어느 하나만 균열 위에 존재할 때도 휨 모드가 지배적이었으며 균열 밖의 범위의 건전한 영역에는 가진 점, 측정 점이 모두 위치하여야 두께 모드가 지배적이었다.

• Asian Journal of Atmospheric Environment
• /
• 제8권1호
• /
• pp.15-24
• /
• 2014

The capital city of Himalayan Country Nepal, Kathmandu Valley is surrounded by consecutive high mountains, which limits the air distribution and mixing effects significantly. It in turn generates steady air flow pattern over a year except in monsoon season. The air shed in the Valley is easily trapped by the surrounded mountains and the inversion layer formulated as the cap. The $PM_{10}$ concentration was noticeably higher than the standard level (120 ${\mu}g/m^3$) in urban and suburban area of Kathmandu valley for all seasons except monsoon period. The Valley area experiences similar wind patterns (W, WWS, and S) for a year but the Easterly wind prevails only during the monsoon period. There was low and calm wind blows during the winter season. Because of this air flow structure, the air emission from various sources is accumulated within the valley air, high level of air pollution is frequently recorded with other air polluted cities over the world. In this Valley area, brick kilns are recognized as the major air pollution source followed by vehicles. Mostly Bull Trench Kiln (BKT), Hoffman Kiln and Vertical Shaft Brick Kiln (VSBK) are in operation for brick firing in Kathmandu valley where the fuels such as crushed coal, saw dust, and natural gas are used for processing bricks in this study. Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) was used for screening and quantifying the potential impacts of air emission from firing fuels. The total Environmental Performance Score (EPS) was estimated and the EPS of coal was approximately 2.5 times higher than those of natural gas and saw dust. It is concluded that the crushed coal has more negative impact to the environment and human health than other fuel sources. Concerning the human health and environment point of view, alternative environment friendly firing fuel need to be used for brick industry in the kiln and the air pollution control devices also need to be applied for minimizing the air emissions from the kilns.

• 환경영향평가
• /
• 제7권2호
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.