• Asian Journal of Atmospheric Environment
• /
• 제8권3호
• /
• pp.126-139
• /
• 2014

In order to estimate the influence of sources on $PM_{2.5}$ in the industrial area of Japan, we carried out a source analysis using chemical component data of $PM_{2.5}$. $PM_{2.5}$ samples were collected intermittently at an industrial area in Japan from July 2010 to November 2012. Water soluble ions ($Cl^-$, $NO_3{^-}$, $SO{_4}^{2-}$, $Na^+$,$NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), elements (Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Sb, Pb), and carbonaceous species (OC, EC) of the $PM_{2.5}$ (a total of 198 samples) were analyzed. Positive Matrix Factorization (PMF) model was applied to the data of those chemical components to identify the source of $PM_{2.5}$. At this observation site, nine factors were extracted. The major contributors of $PM_{2.5}$ were secondary sulfate 1, in which loading factors of $SO{_4}^{2-}$ and $NH_4{^+}$ were large (percentage source contribution: 20.9%), traffic, in which loading factors of OC (organic carbon) and EC (elemental carbon) were large (20.8%), secondary sulfate 2, in which loading factors of K and $SO{_4}^{2-}$ were large (8.0%), steel mills (7.8%), secondary chloride and nitrate (7.0%), soil (5.0%), heavy oil combustion (3.8%), sea salt (3.8%), and coal combustion (2.3%). The conditional probability function (CPF) and the potential source contribution function (PSCF) were carried out to examine the influence of a regional source and a broad-based source, respectively. CPF results supported local source influences such as steel mills, sea salt, traffic, coal combustion, and heavy oil combustion. PSCF results suggested that ships in the East China Sea, an industrial area of the east coastal region of China, and an active volcano in the Kyushu region of Japan were potential regional sources of secondary sulfate 1. Secondary sulfate 2 was affected by the burning of biomass fields and by coal combustion in Chinese urban areas such as Beijing, Hebei, and western Inner Mongolia. Source characterization using continuous data from one site showed a potential source representing fossil fuel combustion is affected both by regional and broad-based sources.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.291-294
• /
• 2000

가속 주행하는 차량의 소음을 줄이기 위해서는 각 소음원의 기여도를 파악하는 것이 필요하다. 본 논문에서는, 가속 주행하는 차량의 배기 토출 소음을 ISO362에서 규정한 음압 측정 지점에서 예측하기 위하여, 시간 영역에서 근접장 배기 토출 소음을 예측할 수 있는 시뮬레이션 프로그램 'WAVE'와 움직이는 음원의 방사 모델을 이용하였다. 가속 주행중 차량의 소음원에 의한 음파의 전달은 도플러효과와 시간 지연이 발생하며, 이를 고려하여 정지된 지점에서의 소음레벨을 예측하였으며, 배기 토출 소음의 예측을 통하여 가속주행소음에 대한 기여도와 그 소음 특성을 파악할 수 있다.

• 한국대기환경학회지
• /
• 제31권5호
• /
• pp.437-448
• /
• 2015

The purpose of this study is to present the source contribution of the fine particles ($PM_{2.5}$) in Chungju area using the CMB (chemical mass balance) method throughout the four seasons in Korea. The Chungju's annual average level of $PM_{2.5}$ was $48.2{\mu}g/m^3$, which exceeded two times higher than standard air quality. Among these particles, the soluble ionic compounds represent 54.2% of fine particle mass. Additionally, the OC concentration in Chungju stayed similar to other domestic cities, while the EC concentration decreased significantly compared to other domestic/international cities. The concentration of sulfur represented the highest composition (8%) among the fine particle compounds. According to the CMB results, the general trend of the $PM_{2.5}$ mass contributors was the following: secondary aerosols (50.5%: ammonium sulfate 26.5% and ammonium nitrate 24.0%) > gasoline vehicle (18.3%) > biomass burning (11.0%) > industrial boiler (6.0%) > diesel vehicles (4.4%). The contribution of the secondary aerosols was the main cause than others. This impact is assumed to be emitted from air pollutants of urban cities or neighbor countries such as China.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.1-8
• /
• 2002

With the possibility of hot water being able to be used as a heating source in a liquid desiccant system, an experimental apparatus for regeneration of the liquid desiccant was set up and series of experiments were conducted in a climate-controlled chamber. This study was performed to ascertain the influences of experimental factors on regenerating performance and to suggest the optimal combination of factors affecting regeneration rate. Furthermore. in order to figure out the contribution ratio of the factors on regenerating performance, a multi-way factorial design among the design of experiments was adopted. According to experimental results, the most influential factor on regenerating performance was temperature of the liquid desiccant and its contribution ratio was about 79.4%. In addition. the optimal operating combination was as follows; $60^{\circ}C$ of solution temperature, $14\ell$/min of solution flow rate, and 190m3/h of air volume.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.9-17
• /
• 2014

Several studies have been carried out on the source contribution of the particulate Polycyclic Aromatic Hydrocarbons (PAHs) over Seoul by using the Chemical Mass Balance Model (CMB)(Lee and Kim, 2007; Kim et al., 2013). To confirm the validity of the modeling results, the modified model employing a photochemical loss rate along with varying residence times and the standard model that considers no loss were compared. It was found that by considering the photochemical loss rate, a better performance was obtained as compared to those obtained from the standard model in the CMB calculation. The modified model estimated higher contributions from coke oven, transportation, and biomass burning by 4 to 8%. However, the order of the relative importance of major sources was not changed, coke oven followed by transportation and biomass burning. Thus, it was concluded that the standard CMB model results are reliable for identifying the relative importance of major sources.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1912-1919
• /
• 2018

The output capacitance of power semiconductor devices is important in determining the switching losses and in the operation of some resonant converter topologies. Thus, it is important to be able to accurately determine the output capacitance of a particular device operating at elevated power levels so that the contribution of the output capacitance discharge to switch-on losses can be determined under these conditions. Power semiconductor switch manufacturers usually measure device output capacitance using small-signal methods that may be insufficient for power switching applications. This paper shows how first principle methods are applied in a novel way to obtain more relevant large signal output capacitances of Gallium-Nitride (GaN) FETs using the drain-source voltage transient during device switch-off numerically. A non-linear capacitance for an increase in voltage is determined with good correlation. Simulations are verified using experimental results from two different devices. It is shown that the large signal output capacitance as a function of the drain-source voltage is higher than the small signal values published in the data sheets for each of the devices. It can also be seen that the loss contribution of the output capacitance discharging in the channel during switch-on correlates well with other methods proposed in the literature, which confirms that the proposed method has merit.

• 한국음향학회지
• /
• 제33권1호
• /
• pp.40-47
• /
• 2014

원심팬 날개 깃에서 발생한 와류와 원심팬 볼루트 사이의 상호작용은 원심팬의 주요한 소음원으로 알려져 있다. 본 연구에서는 저소음 설계의 기초 자료로 활용하기 위하여 원심팬의 주요한 소음원 영역으로 고려되는 원심팬 볼루트 영역을 세분화하여 볼루트 영역내의 상대적 기여도를 분석한다. 주요한 소음원으로부터 방사되는 소음을 예측하기 위해 내부 음장용 복합 전산공력음향학(CAA, Computational Aero-Acoustics) 방법을 사용한다. 이 방법은 전산유체역학(CFD, Computational Fluid Dynamics)과 음향상사법(Acoustic Analogy), 그리고 경계요소법(BEM, Boundary Element Method)을 사용하여 원심팬 내부 유동장으로부터 방사한 소음을 원심팬 외부 음향장에서 예측하는 방법이다. 복합 CAA 방법을 이용한 원심팬 볼루트 영역내의 소음원의 상대적 기여도 분석은 컷-오프영역으로부터 출구영역보다 컷-오프영역으로부터 원심팬 스크롤영역이 전체 소음에 대한 기여도가 높고, 날개 깃의 쉬라우드 영역보다 허브 영역이 전체 소음에 대한 기여도가 높다는 것을 보여준다. 이러한 결과는 향후 저소음 원심팬 개발을 위한 유용한 자료로 활용될 것이다.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1371-1379
• /
• 2012

본 논문에서는 직접분사 가솔린엔진 부품에 의해서 발생하는 진동에 대한 기여도를 분석하는 방법을 제시한다. 본 연구에서는 부분기여도함수를 적용하여 부품 상호간의 관련성에 대한 진동원을 규명 하는데 사용하였다. 직접분사 가솔린 엔진 부품의 진동원을 규명하는데 부분기여도함수 방법을 사용하기 위해서는 시스템의 모델링이 필요하며 본 연구에서는 진동 발생 경로를 2 입력과 단일 출력계로 시스템을 모델링하였다. 이 모델링을 증명 하기 위해서, 직접분사가솔린 엔진의 진동원인 고압펌프, 연료레일, 인젝터, 고압센서에 3 축 가속도계 센서로 각 부품의 진동을 측정했다. 이 모델링을 바탕으로 각각의 진동원에 대한 부분기여도 함수를 구했으며, 직접분사 부품들의 각각의 진동 기여도를 계산하였다. 부분기여도 함수를 바탕으로 한 모델링을 통해 각 부품들에서 발생되는 진동 출력 기여 값을 정량적으로 도출하였다.

• 한국물환경학회지
• /
• 제31권1호
• /
• pp.55-66
• /
• 2015

It has been well known that it is not easy to quantify pollutant loads driven by non-point source pollution due to various factors affecting generation and transport mechanism of it. Especially pollutant loads through baseflow have been investigated by limited number of researchers. Thus in this study, the Web-based WAPLE (WHAT-Pollutant Load Estimation) system was developed and applied at study watersheds to quantify baseflow contribution of pollutant. In YbB watershed, baseflow contribution with WWTP discharge is responsible for 49.5% of total pollutant loads at the watershed. Among these, pollutant loads through baseflow (excluding any WWTP discharge) is responsible for 61.7% of it. In GbA watershed, it was found that 58.4% is contributed by baseflow with WWTP discharge 2.9% and 97.1% is by baseflow. For NbB watershed (without WWTP discharge), 52.3% of pollutant load is transported through baseflow. As shown in this study, it was found that over 50.0% of TN (Total Nitrogen) pollutant loads are contributed by non-direct runoff. Thus pollutant loads contributed by baseflow and WWTP discharge as well as direct runoff contribution should be quantified to develop and implement watershed-specific Best Management Practices during dry period.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E4호
• /
• pp.203-213
• /
• 2002

Receptor modeling is one of statistical methods to achieve reasonable air pollution strategies. In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The main purpose of the study was to survey seasonal trends of inorganic elements in the coarse and fine particles. Second, this study has attempted emission sources qualitatively by a receptor method, the PMF mo-del. After that. both PMF (positive matrix factorization) model and TTFA (target transformation factor analysis) model were applied to compare and to estimate mass contribution of coarse and fine particle sources at the receptor. A total of 138 sets of samples was collected from 1989 to 1996 by a low volume cascade impactor with 9 size fraction stages at Kyung Hee University in Korea. Sixteen chemical species (Si, Ca, Fe, K, Pb, Na, Zn, Mg, Ba, Ni, V, Mn, Cr, Br, Cu. Co) were characterized by XRF. The study result showed that the weighted arithmetic mean of coarse and fine particles were 51.3 and 54.4 $\mu\textrm{g}$/㎥, respectively. Contribution of both particle fractions were esti-mated using TTFA and PMF models. The number of estimated sources was seven according to TTFA model and 8 according to PMF model. Comparison of TTFA and PMF revealed that both methodologies exhibited similar trends in their contribution pattern. However, large differences between contributions were observed in some sour-ces. The results of this study may help to suggest control strategies in local countries where known source profiles do not exist.