• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.120-125
• /
• 2015

With rapid urbanization, the volume of traffic in urban area has been significantly increased. This in turn led to problem which can be described as Road Traffic Noise. Currently, to alleviate the road traffic noise damage, a demand for installation of soundproofing walls is rising. Among different shapes of soundproof walls being installed, the reflection-type acoustical insulation panel is highly drawing attentions of residents due to the fact that it does not obstruct their field of vision in contrast with the opaque acoustical insulation panel. On the other hand, improving the soundproofing wall of the reflection-type acoustical insulation barrier panel needs to be focused on since it has a possibility to cause a secondary damage by reflected sounds. Therefore, in this research, study has been carried out to improve the forms in order to minimize travelling of reflected sounds through changing the frontal surface shape and geometrical shape of the reflection-type soundproofing panel. A result from comparison between the normal reflection-type soundproofing panel and the improved soundproofing panel, with reduction effects in the noise reflection, showed that the curved type of soundproofing panel has an impact on reducing the noise up to 1.5 dB. Furthermore, from the research conducted, it appears that the increase and decrease in the reflected sounds can be changeable depending on various design factors. Thus, it turns out that the study shows a potential possibility to develop a reduction technology of the reflected sounds pertaining to overall condition on the soundproofing walls.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.3
• /
• pp.27-35
• /
• 2011

This study investigated a sound reduction degree by each soundproofing materials and the sound pressure level of a main frequency range to develop soundproofing facilities installed for reducing sound in a tunnel blasting. The frequency range and sound pressure level of soundproofing materials(eg. sand and water etc.) mainly used at a working spot were measured using the experimental apparatus considered with blasting situation. The full scale pilot test was also carried out using developed soundproofing facilities in this study. And the performance of developed soundproofing facilities was analyzed. As a result, the developed soundproofing facilities using water in sound insulation materials could reduce about 10dB(A) of blasting noise in compare with the existing soundproofing facilities.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.63-64
• /
• 2022

Inter-floor noise in an apartment building is a serious problem that causes conflicts between tenants. Accordingly, there are various attempts to solve this problem, but it is not easy to find a clear solution. Therefore, in this study, a soundproofing material between floors was developed that can improve the sagging that occurs after construction. And as a result of testing the developed interlayer soundproofing material, both light weight and weight were grade 1. And it was analyzed that maintenance performance could be improved with integrated structural characteristics.

• KIEAE Journal
• /
• v.7 no.2
• /
• pp.57-62
• /
• 2007

Recently Among indoor noises plumbing noise from supply and drain water pipe is being pointed out as a annoying noise following to floor impact noise, and it is increasing the rate to point the noise due to the following several reasons: water pressure, vibration by fabricated structures and direct noise propagation from upper floor through ceiling This study aims to analyse the characteristics of toilet stool plumbing noise in apartment bathroom which are generated by crossing plumbings and elbows. And it analyse the effect of noise reduction by soundproofing and insulations which are covered at crossing plumbings. And also analyse the characteristics of noise about a type of elbows, crossing plumbing and result of dB(A). At last it provide a fundamental data for the purpose of reduction of plumbing noise in apartment.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.152-160
• /
• 2023

Sound barrier walls are the most basic way to cope with noise problems in urban residential environments. The most important acoustic function of sound insulation board is represented by sound transmission loss and sound absorption coefficient. However, Korea has not yet established a standard for measuring the sound absorption rate of sound insulation boards. In addition, even in the European standard, where the overall acoustic standard of soundproofing boards has already been established, the sound absorption rate is applied only to the standard for measuring the sound absorption rate of general building finishing materials, and a separate measurement method considering the characteristics of soundproof walls and soundproofing boards is not presented. The sound absorption coefficient should be evaluated by summing up the energy absorbed into the material as well as the energy transmitted through the material, but the current European standard has a problem in that the transmitted sound energy is not taken into account. In this paper, we reviewed the sound absorption coefficient measurement standards of sound insulation boards currently being presented, and verified the difference between the results and the new measurement method considering transmission sound for sound insulation boards actually used in Korea.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.2
• /
• pp.77-84
• /
• 2010

Hanok has been widely distributed as a support policy by local governments for the purpose of improving residential environment. In this study, Hanok in a rural area was founded was to evaluate the user's satisfaction. Hanok between residents and the perception of architects and tries to figure out the difference. Current Hanok residents showed higher satisfaction, but they showed negative response for high construct cost, plane form of building, insulation performance and noise. According to the comparison of recognition between residents and architectural designers, they showed differences in "Low soundproofing", "lack of storage space", "Equipment", "Tile", "The modularity of the flat panel design", and "The modularity of construction materials" and it was examined that architectural designers group had higher preference for traditional materials and forms. For succeeding to the traditional architectural factors of Hanok and distributing it as modern house, the research on use of modern materials and modulation of plane and members should be performed for reducing construction cost and improving insulation performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.222-223
• /
• 2020

Recently, as the era of economic cooperation on the Korean Peninsula approaches, the role of the building sector, such as humanitarian reorganization of North Korean housing, is increasing. The purpose of this study is to find out the current location of North Korean housing standards through the North Korean Housing Survey. For the survey, a survey was conducted through 79 North Korean defectors. The main construction methods of North Korean housing are reinforced concrete, steel framed, wooden framed, masonry, and reinforced concrete walled and prefabricated. The residential environment satisfaction items consist of durability, waterproof, heating, ventilation, heat insulation, air tightness, mining, soundproofing, disaster safety, fire safety, and crime prevention. The result is as follows. The housing construction method in North Korea, which lived at that time, consisted of 21 people (30.88%) of reinforced concrete frames, 18 people (26.47%) of wooden frames, 17 people (25%) of masonry walls, 5 people of prefabricated structures (7.35%), and reinforced concrete. Two people (2.94%) were walled. Among these, the wooden frame type had the lowest satisfaction level for each item, and the reinforced concrete had a high level of dissatisfaction in the items of heating, confidentiality, and disaster safety, and the other item had a high level of satisfaction. The masonry wall type has a relatively high satisfaction level in terms of insulation, confidentiality, mining, and disaster safety.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.140-145
• /
• 1999

In this study, noise analyses were performed toward ten school and one library-building adjacent to road. In particular, noise levels measured in the case-study city were compared to those from environmental noise standard as well as to encouraged noise level. In the analyses, the following conclusions are emphasized in order to make comfortable educational learning environment. 1) When windows were open, the measured noise level of 9 schools exceeded the encouraged noise level. In order to mitigate the exceeded level, it is necessary to plant trees or lawn and install soundproofing wall. 2) When windows were closed, the measured noise level of the most schools showed lower than that of encouraged level. For sound insulation, installing both double window and casement window are required. 3) Schoolhouse's vertical arrangement from the road in order to minimize the expected noise effect, and provision of green space by which visual hiding as well as psychological comfort are presumably achieved.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.565-570
• /
• 2001

Annually, Taiwan generates approximately 2 million tons of inorganic wastes in the form of sludge, fly ash and slug. To increase the added value of waste and maintain the increasingly insufficient supply of natural gravel, large public construction projects account for this large demand each year. future architectural trends are leading towards high-rise buildings. In light of the above, Center for Environmental, Safety and Health Technology Development, Industrial Technology Research Institute has developed the technology of manufacturing cold-bonding, sintering and bloating types of lightweight aggregates with a specific gravity ranging between 0.7~1.7, water absorption rate < 30%. The lightweight aggregate verified by physical property tests can be used as a substitute for the natural aggregate, which generally appears in replacing gravel in concrete, soundproofing and heat insulation materials. Doing so would not only moderate waste disposal problems, but also achieve the goal of resource recovery.

• Journal of the Korean housing association
• /
• v.9 no.1
• /
• pp.43-53
• /
• 1998

The purpose of this study is to provide a basic study for a desirable bathroom planning of the 30s pyung apartment. The survey was performed to the housewives of 30s pyung apartments in Seoul. The purpose of the survey was to examine the dweller's consciousness, satisfaction, and demands on bathroom in 30s pyung apartments, and to give useful information on bathroom planning of 30s pyung apartment. Some details shoul be considered in bathroom planning of 30s pyung spartments. It seems that the bathrooms of bath unit and extra sink and a toilet stool are the most approriate type in 30s pyung apartment among present bathroom types. It is suitable that the bathroom is close to bedroom and the bathroom door faces the wall. There is much meed for a showercurtain and more comfortable toilet stool. It is necessary to reduce the noise of toilet stool and reinforce the soundproofing fuction in bathroom. And the function of ventilation, drainage, and insulation should be improved for better bathroom enivronment. The implications of this findings for apartment bathroom planning and future research were discussed.