• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.878-881
• /
• 2003

To acquire an appointed speaker's clear voice signal from inspect-camera, picture-conference or hands free microphone eliminating interference noises needs to be preceded speaker's position automatically. Presumption of sound source position's basic algorithm is about measuring TDOA(Time Difference Of Arrival) from reaching same signals between two microphones. This main project uses ADF(Adaptive Delay Filter) [4] and CPS(Cross Power Spectrum) [5] which are one of the most important analysis of TDOA. From these analysis this project proposes presumption of real time sound source position and improved model NI-ADF which makes possible to presume both directions of sound source position. NI-ADF noticed that if auditory sense of humankind reaches above to some specified level in specified frequency, it will accept sound through activated nerve. NI-ADF also proposes practicable algorithm, the presumption of real time sound source position including both directions, that when microphone loads to some specified system, it will use sounds level difference from external system related to sounds of diffraction phenomenon. In accordance with the project, when existing both direction adaptation filter's algorithm measures sound source, it increases more than twice number by measuring one way. Preserving this weak point, this project proposes improved algorithm to presume real time in both directions.

• 대한전자공학회논문지SP
• /
• 제46권2호
• /
• pp.24-29
• /
• 2009

음원 추정 시스템은 로봇, 화상회의, CCTV(Closed-circuit television) 시스템에 쓰인다. 이러한 음원 추정 시스템은 사람을 대상으로 하며 사람이 말하는 동안 여러 개의 음성 데이터 프레임을 입력받을 수 있다. 본 논문에서는 입력된 음성 데이터 프레임으로부터 정확한 각도를 계산 할 수 있는 음성 데이터 프레임을 선별하여 각도 추정 오차를 줄이는 방법에 대해서 제안한다. 또한 선별된 데이터를 각도로 변환한 후 메디언 필터를 적용하여 음원 추정 시스템의 오차를 줄일 수 있다. 제안된 시스템을 이용하여 실험한 후 각도 추정 오차 평균이 31%감소함을 보인다.

• 한국음향학회지
• /
• 제41권6호
• /
• pp.698-704
• /
• 2022

본 논문에서는 노즐 내부 유동의 소음원으로부터 발생되어 방사되는 공력 소음을 정량적으로 분석하였으며, 이를 외부 방사소음 결과와 비교하였다. 세가지 종류의 노즐 형상에 대해 내부 및 외부 유동을 정확히 예측하기 위해 고해상도 수치해석 기법인 비정상 압축성 대와류모사(Large Eddy Simulation, LES) 기법을 사용하였다. 와류소음원(Vortex Sound Source)을 통해 유동소음원을 확인하였으며, 이를 통해 노즐 내부 형상에서 주요 유동소음원의 분포를 확인하였다. 노즐 내부 유동의 와류소음원 레벨과 외부 방사 소음의 예측결과 및 측정결과와 비교하였으며, 이를 통해 정량적 분석을 검증하였다.

• KIEAE Journal
• /
• 제9권4호
• /
• pp.23-28
• /
• 2009

Standard sound source currently used in heavy-weight floor impact sounds that cause many social problems has excessive low-frequency energy within a range from 63 Hz to 125 Hz, and is difficult to evaluate and measure. To solve these problems, studies are widely performed using a new impact source, the impact ball. In this study, the sound fields in a receiving room were compared and analyzed according to the current impact source, the bang machine, and the impact ball. And deviation of sound pressure level according to the impact source positions were compared. In case of impact ball, the sound pressure level was lower at 63 Hz and below and higher at 125 Hz and above. The same trend was observed at the low-frequency range on the horizontal and vertical planes, regardless of the type of the impact source, which showed the influence of the room mode. There was a problem with the variations in the sound pressure level according to the size or shape of the receiving room. And it also shows that change of source positions may effect the single number rating scheme.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.565-573
• /
• 2006

Acoustic analysis of a moving sound source required that the measured sound signals be do-Dopplerized and restored as of the original emission signals. The purpose of this research is development of beamforming technique can be applied to the rotor noise source identification. For the do-Dopplerization and reconstruction of emitted sound wave, Forward Propagation Method is applied to the time domain beamforming technique. And validation test were performed using rotating sound source constructed by bended pipe and horn driver. In the validation test using sinusoidal sound wave, sufficient performance of signal processing can be seen, and the effect of measuring duration for accuracy was compared. In the prop-rotor measurements, the acoustic source locations were successfully verified in varying positions for different frequencies and collective pitch angle, in hover condition.

• 한국음향학회지
• /
• 제33권1호
• /
• pp.60-67
• /
• 2014

본 논문은 음원의 마스터링부터 출력단계까지의 비합리성을 근본적으로 해결하기 위한 절대음량 체계의 개념을 제안하였다. 절대음량 체계는 모든 음원의 입력절대음량을 60 dB(S) 기준으로 평준화한 후, 차등음량태그를 이용하여 제작자가 의도한 음량 밸런스를 구현한다. 그 후 출력절대음량을 입력절대음량과 매칭하여 청자가 의도한 목표 음량을 구현하게 된다. 이 체계가 도입되면 음원 제작자는 불필요한 음량경쟁 없이 음원 자체의 완성도에 집중할 수 있으며, 차등감소 태그입력만으로 자신이 의도한 음량밸런스를 구현할 수 있다. 그리고 청자는 청취 환경과 음향시스템에 관계없이 자신이 청취하고 싶은 절대음량 기준에 맞춰서 모든 음원을 시행착오과정 없이 감상할 수 있다.

• 한국음향학회지
• /
• 제22권8호
• /
• pp.660-669
• /
• 2003

본 논문은 음원 근처의 홀로그램 평면에서 측정된 음압에 대한 상호 파워 스펙트럼으로부터 홀로그램 평면에서의 음압 분포를 구하고 획득된 음장을 공간 변환하여 음원의 음장을 구하기 위한 이론을 설명하였으며, 홀로그램 평면에서의 상호 파워 스펙트럼으로부터 모든 지점에서의 음압을 구하기 위해 비선형 방정식에 대한 Taylor 급수를 전개하고 Newton-Raphson 법을 이용하여 계산하는 방법과 음원 영역으로의 역방향 전파시 발생되는 오차를 줄이기 위한 파수 필터를 제시하였다. 무한 배플 내의 원판형 진동체 수중 음원에 대한 모의실험을 통해 결과를 고찰하고 제시된 이론을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.751-755
• /
• 2005

We propose a sound source localization method using the Head-Related-Transfer-Function (HRTF) to be implemented in a robot platform. In conventional localization methods, the location of a sound source is estimated from the time delays of wave fronts arriving in each microphone standing in an array formation in free-field. In case of a human head this corresponds to Interaural-Time-Delay (ITD) which is simply the time delay of incoming sound waves between the two ears. Although ITD is an excellent sound cue in stimulating a lateral perception on the horizontal plane, confusion is often raised when tracking the sound location from ITD alone because each sound source and its mirror image about the interaural axis share the same ITD. On the other hand, HRTFs associated with a dummy head microphone system or a robot platform with several microphones contain not only the information regarding proper time delays but also phase and magnitude distortions due to diffraction and scattering by the shading object such as the head and body of the platform. As a result, a set of HRTFs for any given platform provides a substantial amount of information as to the whereabouts of the source once proper analysis can be performed. In this study, we introduce new phase and magnitude criteria to be satisfied by a set of output signals from the microphones in order to find the sound source location in accordance with the HRTF database empirically obtained in an anechoic chamber with the given platform. The suggested method is verified through an experiment in a household environment and compared against the conventional method in performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.600-605
• /
• 2000

The aim of this study is to compare the sound insulation performances of window depending on the measurement methods through the field test and analyze the factors that affect the sound insulation performances. Four measurement methods which are specified in the Koran Standard 2235 and the International Standard 140-5 were selected for the study; the outdoor sound source method which is classified the l000mm method and the 10mm method, the indoor sound source method, and the ISO method. The result of this study is that the sound insulation performance of the windows was the best when measured according to the ISO method and the worst the indoor sound source method. Through the study it was found that the main factors affecting the sound insulation performance of the windows were the correction of the specimen's area and the equivalent sound absorption area of the receiving room.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1203-1209
• /
• 2001

Identification of noise sources, their locations and strengths, have been taken great attention. The method that can identify noise sources normally assumes that noise sources are located at a free field. However, the sound in a reverberant field consists of that coming directly from the source plus sound reflected or scattered by the walls or objects in the field. In contrast to the exterior sound field, reflections are added to sound field. Therefore, we have to consider the reverberation effect on the source identification method. The main objective of this paper is to identify noise source in the reverberant field. At fist, we try to identify noise sources in a rigid wall enclosure using the spherical beamforming method. In many case of practical interest, the wall has an admittance so that complex reflection process occurred. In this paper, we assumed the complex reverberant field in the enclosure to be the sum of plane waves with random incidence and magnitude. Then the effects of reverberant field at interior source identification have been studied theoretically as well as experimentally