• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.22-25
• /
• 2007

Industry faces a considerable challenge to meet the high demand for reduced impacts and improved environmental performance. With this current stream, railway industry launched a systematic scheme for environmental friendly EMU and its system. An assessment tool which evaluate the environmental impacts of the product through its entire life cycle has been developed. The next step to environmentally sound and sustainable product design, shortly ECODESIGN has come to be essential and necessary as well. Ecodesign requires to identify possible stakeholder requirements first. The paper illustrates way how to define stakeholder requirements in terms of environment and shows approach linking stakeholder requirements to environmental parameters.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.87-94
• /
• 2004

In this paper, the experimental design of an intake system was studied using the two microphones method and the taguchi method. The transmission loss was utilized to represent the performance of noise reduction for the intake system which was estimated by measuring sound power at inlet and outlet with two microphones, respectively. Two microphones method used in this paper was followed by wave decomposition theory. The robust designing parameters of an intake system were extracted by adapting a cost function with the taguchi method, which optimized the process. Finally the effectiveness of the propose method was validated with the experimental data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.396-401
• /
• 2000

It is addressed that the turbulent broadband sound power from a sirocco fan can be modeled by the trailing edge noise. The trailing edge noise is usually influenced by inflow turbulence, separation, and boundary layer on the blade. The design parameters such as solidity(c/s) and stagger angle are specified to predict performance and noise level because the separation and slip velocity are strongly affected by them along with the flow coefficient. This paper reports the effects of the solidity and the stagger angle upon the trailing edge noise from the circular arc-shaped blade of sirocco fan.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.28-34
• /
• 2000

Copper clad aluminum composite materials are being used for economic and structural purposes, The development of an efficient production method of copper clad aluminum composite material rods by extrusion is very important. This paper describes experimental investigations in the direct extrusion of copper clad aluminum rods through conical dies. There are several parameters that have an influence on determining a sound clad extrusion. These variables are extrusion temperature, extrusion ratio, semi-cone angle of die, extrusion force, extrusion velocity, friction of between the container and billet, percentage of copper used and ratio of flow stress of copper to aluminum. In order to investigate the influence of extrusion temperature, extrusion ratio, semi-cone angle of die on the hot direct extrudability of the copper clad aluminum composite material rods, the experimental study have been performed with these variation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.3
• /
• pp.11-16
• /
• 2004

In this study, the characteristics of signals such as acoustic emission, vibration amplitude and noise level which are derived from the abnormal condition of compressor are investigated. The normal condition, vane stick sound and roller defect condition are chosen to analyze the signal in each cases. From the feature extraction of each signals, the dominant parameters of each signals which can identify the abnormal condition are suggested.

• Journal of Korea Foundry Society
• /
• v.27 no.4
• /
• pp.173-178
• /
• 2007

The bearing bracket, which has produced by the squeeze casting for the high strength in lightweight part of automobile, was developed by the rheocasting process using the H-NCM slurry. Compared with the squeeze casting, the rheocasting process has some merits such as shortening cycle-time, reducing total weight, and increasing productivity. In this study, partial feeding test was carried out by controlling plunger stroke length and compared with semisolid simulation. Optimal casting parameters such as injection speed and stroke variations were established. Sound products with integral microstructure were obtained by the H-NCM slurry and X-ray analysis also showed the integral condition throughout the entire parts.

• Speech Sciences
• /
• v.9 no.4
• /
• pp.253-263
• /
• 2002

In this paper, we propose new algorithm of speaker recognition which identifies the speaker using the information obtained by the intensive speech feature analysis such as pitch, intensity, duration, and formant, which are crucial parameters of individual voice, for candidates of high percentage of wrong recognition in the existing speaker recognition algorithm. For testing the power of discrimination of individual parameter, DTW (Dynamic Time Warping) is used. We newly set the range of threshold which affects the power of discrimination in speech verification such that the candidates in the new range of threshold are finally discriminated in the next stage of sound parameter analysis. In the speaker verification test by using voice DB which consists of secret words of 25 males and 25 females of 8 kHz 16 bit, the algorithm we propose shows about 1% of performance improvement to the existing algorithm.

• Phonetics and Speech Sciences
• /
• v.4 no.1
• /
• pp.13-20
• /
• 2012

A lax stop in Korean, one of the three laryngeal contrastive stops, has undergone a sound change in terms of its acoustic properties. Prior production studies described this recent lax stop as being differentiated from tense and aspirated stops primarily by fundamental frequencies (f0). And, the acoustic property of voice onset time (VOT) further separates tense stops from lax and aspirated stops. The current research explores how these two major acoustic parameters of f0 and VOT cue the three stop categories in Korean adult listeners' perception. Thirty-one native speakers of Korean participated in two experimental tasks: categorization judgment and within-category goodness ratings. Two sets of audio stimuli were prepared by synthesizing English and Korean male speakers' CV productions. The findings showed that while f0 cues listeners to lax stops as production patterns would predict, VOT were closely related to listeners' categorization and goodness ratings of lax stops. This suggests that accurate characterizations of the recent lax stop category need to be based on Korean speakers' perceptual behavior as well as production patterns.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.131-136
• /
• 2003

Experimental study on combustion characteristics of double swirl coaxial injectors has been conducted for the assessment of critical design parameters of injectors. A subscale thrust chamber has been fabricated with a water-cooled copper nozzle, which allows a chamber to be reused without replacing parts. Two different designs of injectors have been tested for the understanding of the effects of recess length on combustion. Clearly, the recess length drastically affects the combustion efficiency and hydraulic characteristics of the injector. Internal mixing of propellants in the injector with the recess number of two increases a combustion efficiency and reveals sound combustion although a pressure drop required for the similar amount of mass flow rates increases compared with the injector of the recess number of one.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.135-147
• /
• 1997

The production of light metal parts using aluminum is mainly performed by die casting and squeeze casting, which directly fabricate the required shape from the liquid state. However, die casting is subject to defects such as shrinkage porosity and air trapped when molten metal enters the cavity, whilst squeeze casting also has defects due to turbulent flow in the die cavity. Both diecasting and sqeeze casting have inhomogeneous mechanical property in terms of dendritic structure during solidification. Active research has been carried out on semi-solid processing, rather than on conventional process methods such as die casting, which involve various problems. Therefore in this paper, to introduce the fundamental technology for d e design, in die casting and forging process with semi-solid materials, relationship between stress and strain of semi-solid materials, and for producing parts die design has been proposed as parameters of globulization of the microstructure and gate shape. The prevention of various defects to produce sound parts are also introduced.