• 한국음향학회지
• /
• 제22권8호
• /
• pp.660-669
• /
• 2003

본 논문은 음원 근처의 홀로그램 평면에서 측정된 음압에 대한 상호 파워 스펙트럼으로부터 홀로그램 평면에서의 음압 분포를 구하고 획득된 음장을 공간 변환하여 음원의 음장을 구하기 위한 이론을 설명하였으며, 홀로그램 평면에서의 상호 파워 스펙트럼으로부터 모든 지점에서의 음압을 구하기 위해 비선형 방정식에 대한 Taylor 급수를 전개하고 Newton-Raphson 법을 이용하여 계산하는 방법과 음원 영역으로의 역방향 전파시 발생되는 오차를 줄이기 위한 파수 필터를 제시하였다. 무한 배플 내의 원판형 진동체 수중 음원에 대한 모의실험을 통해 결과를 고찰하고 제시된 이론을 검증하였다.

• 센서학회지
• /
• 제30권1호
• /
• pp.47-50
• /
• 2021

Human hearing sensitivity is frequency-dependent. The sensitivity is low at both ends of the audible frequency, and the sensitivity is the highest in the middle band at 3000 Hz. The heart sound of a healthy person is concentrated at a low frequency of 200 Hz or less, and despite using a stethoscope, the hearing sensitivity of the human body is low, and the stethoscope sound is low. Amplifying the sound of the stethoscope is not effective in distinguishing heart sounds in noisy environments because it maintains the same signal-to-noise ratio. In this study, a method of enhancing auditory stimulation was developed by applying a method of moving the spectrum of auscultation sounds into a high-frequency region where the human body is highly sensitive to hearing. The spectrum of the auscultation sound was moved up by 500 Hz in the frequency domain, and an inverse fast Fourier transform (FFT) was performed to reconstruct the auscultation sound. The heart sounds reconstructed by moving the spectra were divided into the first heart and second heart sound components, as in the original heart sound, and it was confirmed that the intensity was large in the cochleagram representing auditory stimulation. Therefore, this study suggested that spectral shift is a method to enhance auditory stimulation during auscultation without increasing the intensity of the auscultation sound.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.56-61
• /
• 1990

수중폭발음의 Energy spectrum 분석에 보다 정밀한 이론적 뒷받침을 하기 위하여 폭발음의 파형에 Gaussian formula를 도입하였으며 이 파형에 따른 Energy spectrum 모델을 새로이 유도하였다. Impulse formula를 이용한 Weston 모델이 낮은 폭발 에너지나 음원의 작동수심이 깊을 경우 이론적 모델로서 한계성을 갖는데 비해 이 모델은 이러한 조건에서도 실험결과와 잘 일치되고 있음을 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.687-696
• /
• 2005

Acoustic power spectrum of the upstream and downstream sound field due to an isotropic frozen turbulent gust impinging on a cascade of flat plate airfoils are computed by using a analytic formulation derived from Smith's method, and Whitehead's LINSUB codes. A parametric study of the effects on sound power of the number of blades and turbulence length scale is performed with an emphasis on analyzing the characteristics of sound power spectrum. Through the comparison of the computed results of sound power, it is found that acoustic power spectrum from the 2-D cascade subject to a ingested turbulence can be categorized into two distinct regions. one is lower frequency region where some spectral components of turbulence do not contribute to the cut-on acoustic modes and therefore the effect of the cascade geometry is more dominant ; the other is higher frequency region where all of spectral components of turbulence make contributions to cut-on acoustic modes and thus acoustic power is approximately proportional to the blade number.

• 한국음향학회지
• /
• 제32권4호
• /
• pp.329-334
• /
• 2013

자동차 엔진을 포함한 구동계 및 흡배기계 소음의 특징은 차수 스펙트럼(order spectrum) 분석으로 파악할 수 있다. 기존의 선행 연구에서는 엔진의 1차 및 2차 점화주파수(firing frequency)와 관련된 차수성분이 차실내부 소음에 주요한 영향을 미치는 것으로 알려져 있다. 본 연구에서는 차수스펙트럼의 변환에 따른 차실내부 소음의 음질(쾌적감) 차이를 파악하고자 한다. 이를 위하여 6실린더 및 4실린더 가솔린 엔진을 가진 승용차의 차실 내부 소음을 측정하고, 이 소음에 적응형 디지털 필터(adaptive digital filter)를 적용하여 차수레벨을 가감하는 방법으로 수정한다. 쌍비교법을 이용한 청음실험을 통하여 원음 및 편집음의 음질 정도를 평가하고, 음질 향상을 위한 차수스펙트럼 변화 방향을 제시한다. 결과적으로 반-차수(half-order) 성분의 차수레벨 감소가 차실내부 소음의 쾌적감 향상에 영향을 주는 반면, 점화차수 레벨의 감소가 항상 음질에 긍정적인 영향을 주는 것은 아님을 파악하였다.

• 한국소음진동공학회논문집
• /
• 제12권8호
• /
• pp.581-588
• /
• 2002

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels omitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured Korea highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of Korea highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power show little difference within 1 dB.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.89-94
• /
• 2006

For audio indexing and targeted search of specific audio or corresponding visual contents, the MPEG-7 standard has adopted a sound classification framework, in which dimension-reduced Audio Spectrum Projection (ASP) features are used to train continuous hidden Markov models (HMMs) for classification of various sounds. The MPEG-7 employs Principal Component Analysis (PCA) or Independent Component Analysis (ICA) for the dimensional reduction. Other well-established techniques include Non-negative Matrix Factorization (NMF), Linear Discriminant Analysis (LDA) and Discrete Cosine Transformation (DCT). In this paper we compare the performance of different dimensional reduction methods with Gaussian mixture models (GMMs) and HMMs in the classifying video sound clips.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.930-938
• /
• 2004

This paper presents the noise source identification of a car A/V system. There are two different kinds of noise sources noise generated by loading mechanism and rattle noise by externally forced vibration. A dynamometer has been made to produce stationary inertia to the loading mechanism of A/V system. Sound pressure spectra and sound intensity were measured by operating the dynamometer setup as various motor speeds, and the results were analyzed. A dominant rattle noise source about A/V system's components has been found by multi-dimensional spectral analysis. Residual spectrum method was applied for eliminating coherence between the vibration sources. In result, the dominant rattle noise source was identified by partial coherent output spectrum of individual vibration component.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1014-1017
• /
• 2007

Sound focusing technologies has been studied for various purposes from early 1990s. As a result, these technologies make us possible to apply in many uses. For example, we can treat tumors using focused ultrasonic waves without surgical knife and communicate in the ocean using time reversal array. Also applications for personal audio system become issues. Recently, as technologies are developing, in some applications, needs for regional focusing become increasing because previously suggested focusing methods, such as phase conjugation, time reversal and inverse filtering, were all about a point focusing. Therefore, studies on regional focusing method are essentially needed. Regional focusing method was firstly mentioned by Choi and Kim in 2002: acoustic contrast control. However, in regional focusing, physical interpretations between control variables and results are still not easy because of its complexity. In this regard, we tried to understand the relations between control variables and results in wavenumber domain and suggested a solution method for regional focusing: wavenumber spectrum matching. We also showed how to make spatially focused sound shape using the suggested method from the simplest case: line focusing.

• International Journal of Advanced Culture Technology
• /
• 제9권2호
• /
• pp.123-129
• /
• 2021

When shaving, it is easy to suffer shaving burns, that is, facial burn irritation during shaving. The reason is that the razor blade irritates the skin. The current solution is to make the razor sharper and use a razor with a blade heating function. Although these ways can increase the comfort of shaving, they will also greatly increase shaving costs. This paper proposes using a hairdryer to massage the skin before shaving to reduce skin irritation during shaving. This is a simple, practical and low-cost method. The hair dryer's heat, sound, and wind energy have a massage effect, and they can make shaving easier and more comfortable. For analyzing shaving effect, two evaluation methods are used, which are sound spectrum analysis and mos. The sound spectrum analysis is used to analyze the working status of the razor objectively. The MOS test can reflect the subjective feelings of the subject on the shaving's comfort. The results show that the hairdryer thermal vibration massage can make the beard easier to cut, thereby reducing the irritation of the razor to the skin and improving shaving comfort.