• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.97-98
• /
• 2008

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.868-869
• /
• 2009

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.601-607
• /
• 2016

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.320-328
• /
• 2005

Last target of architectural acoustics is that people wish to convey voice effectively from the space adaptively in use purpose in building. But, how exactly through space sound (sound source) that wish to deliver from indoor can be passed method to do quantification and evaluate quantity of sound by method to serve indoor architectural acoustics estimation summer period and methods to estimate definition propose. This Study searches special quality of sound source about MLS signal that is occurred short-answer sound source (pistol sound source) and nondirectional speaker among indoor sound estimation method, and measure and analyzed reverberation time (RT60), definition (C80, D50) by regulation of each ISO 3382 in age place (classroom, hall, gymnasium). Analysis result and sound factor among could know that d of two sound sources converges in measurement error extent about reverberation time (RT60) of analysis incidental and sound factors and value shows change irregularly about sound factor of D50, C80, pistol sound source judged there is problem. Also, could know that problem is happened in deflection except reverberation time is in deflection analysis with wave that measure each in fixed distance in branch. Finally, when differ size of sound source and measure about change of sound pressure level in case measure sound pressure level giving difference about 10 dB, sound factor could know that there is no different effect.

• 말소리와 음성과학
• /
• 제4권3호
• /
• pp.13-23
• /
• 2012

The sound /w/ has been traditionally regarded as an independent segment in Korean regardless of the phonological contexts in which it occurs. There have been, however, some questions regarding whether it is an independent phoneme in /CwV/ context (cf. Kang 2006). The present pilot study examined how Korean /w/ is realized in $/S^*wV/$ context by performing some perception tests. Our assumption was that if Korean /w/ is a part of the preceding complex consonant like $/C^w/$, it should be more or less uniformly articulated and perceived as such. If /w/ is an independent segment, it will be realized with speaker variability. Experiments I and II examined the identification rates as "labialized" of the spliced original stimuli of $/S^*-V/$ and $/S^{w*}-^wV/$, and the cross-spliced stimuli $/S^{w*}-V/$ and $/S^*-^wV/$. The results showed that round qualities of /w/ are perceived at significantly different temporal point with speaker and context variability. We therefore conclude that /w/ in $/S^*wV/$ context is an independent segment, not a part of the preceding segment. Full-scale examination of the production test in the future should be performed to verify the conclusion we suggested in this paper.

• 대한의용생체공학회:의공학회지
• /
• 제37권6호
• /
• pp.209-214
• /
• 2016

Binaural hearing aids with a voice transmitter have been widely used to enhance sound quality in noisy environment. However, this system has a limitation on sound-source localization. In this study, we investigated automatic directional-gain control method using geomagnetic sensors to provide directional information to binaural hearing aid user. The loudness gains of two hearing aids were differently controlled based on the directional information between a speaker position and a viewing direction of hearing aids user. This relative directional information was measured by two geomagnetic sensors on hearing aids user and a speaker. The results showed that the loudness gains were accurately controlled and could provide directional information based on the cue of interaural level differences.

• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.30-36
• /
• 2013

최근 미디어 컨텐츠 산업의 세계화로 예술분야에 다양한 활동이 이루어지고 있으며, 이러한 예술분야의 하나인 음향에서 스피커의 중요성은 매우 높다. 스피커의 지향 특성은 음을 방사한 경우에 어느 특정 방향으로 방사되는 특성을 말하며, 공간에서 사용되는 스피커의 가장 중요한 특성중 하나이다. 현재 사용되고 있는 라우드스피커(loudspeaker, 이하 스피커)의 지향 특성을 모든 주파수에서 동일하게 유지되도록 설계하는 것은 음파의 길이와 혼(horn)이나 트랜스듀서(transducer)의 크기 때문에 어려운 문제이다. 이에 본 논문에서는 전기음향 설비에 있어서 실내 음향 특성에 영향을 미치는 전대역 스피커의 저주파수 지향 특성을 개선하기 위한 그레디언트 배열(gradient array) 방법을 제안하였다.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1742-1756
• /
• 1997

The acoustic characteristics of a direct radiator type loudspeaker has been studied in this paper. The natural modes of the speaker cone vibration analyzed numerically by the finite element method have been verified by comparing them with experimental results. The so-ap-proved finite-element model has been used to calculate the vibration response of the cone excited by the voice coil. The vibration displacement of the speaker cone paper has been converted into the vibration velocity and used as a boundary condition for the acoustic analysis. The frequency characteristics, directivity, and sound pressure distribution of the loudspeaker have been calculated by the boundary element method. The numerical results have been verified by the experiments carried out in an anechoic chamber. The variations of the acoustic characteristics due to the changes of some design parameter values can be examined using the numerical model.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.626-633
• /
• 2012

In this paper, sound pressure sensitivity of the fiber optic acoustic sensor according to sensor direction and mandrel material were investigated experimentally. Three different directions were selected as stand, lay, and hole. Hollow cylinder type mandrel dimension is 30 mm in outer diameter, 45 mm in length, and 2 mm in thickness, and about 50 m optical fibers were wounded on the surface of the mandrel. Non-directional sound speaker was used as a sound source. Sagnac interferometer and single mode fiber, a laser with 1,550 nm in wavelength, $2{\times}2$ coupler were used. Based on the experimental results, lay direction's sensitivity is the highest in the frequency range of 2 kHz~4 kHz. 'PTFE+carbon' material is more sensitive than PTFE in the frequency range of 5 kHz~20 kHz. Sound pressure detection sensitivity depends on the mandrel direction and material under certain frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1227-1230
• /
• 1998

Phase control methods are used to expand the sound image in general AV system. However, these methods are effective only to the signal under 1kHz, and the listener must be located in front center of the speaker system. In this paper, we realize the realtime processing system in which phase shifting method is dominant at low frequency and precedence effect is dominant at high frequency. Two sound cards are used to process the audio signal in realtime with 16 bits stereo channel of 44.1 kHz sampling frequency. And the analog circuit is designed to process the phase shifting. In experiments the usefulness of the proposed stereo system is confirmed.