• 한국음향학회지
• /
• 제20권6호
• /
• pp.94-103
• /
• 2001

수치해석 방법을 이용하여 실험으로 구한 머리전달함수 (Head Related Transfer Function: HRTF)를 컴퓨터 시뮬레이션으로 대치하고, 청취자의 머리 주변에서의 음장을 가시화하는 방법에 대해 다룬다. 본 논문에서는 경계요소법 (Boundary Element Method)과 무한요소법 (Infinite-Finite Element Method)의 두 가지 방법을 이용한다. 지금까지는 더미헤드 (Dummy-Head)등을 이용한 실험으로 머리전달함수를 구하였는데 이 실험에는 상당한 시간과 장비가 필요하다. 3차원 레이저스캐너를 이용하여 KEMAR 더미헤드의 형상을 측정하고 이것을 여러 다른 요소 수를 가지는 경계요소모델 및 무한요소모델로 변환하여 머리전달함수를 계산하고 모델의 요소 크기와 적용 가능한 주파수 대역과의 관계에 대해 분석한다. 측정을 통해 구한 머리전달함수와 비교하여 모델을 검증하고 음향학의 상반원리를 적용하여 머리전달함수의 데이터베이스를 구한다. 또한 몇 가지 가상음향 시스템에 대한 음장해석을 통해 주파수 및 시간영역에서의 음장을 가시화한다.

• 한국시뮬레이션학회논문지
• /
• 제30권3호
• /
• pp.31-39
• /
• 2021

포 사격 시에는 폭풍파 형태로 전파되는 과도한 수준의 충격소음이 발생한다. 포 사격 충격음은 주위 구조물의 안정성에도 영향을 미치게 되므로 아군의 포 사격으로 피해를 받지 않으려면 포와 구조물은 적정거리를 이격시켜야 한다. 그러나 이미 적정거리 이하로 건축되어 있는 경우에는 포와 구조물 사이에 방음벽을 세워 피해를 방지할 수 있다. 본 연구에서는 포와 구조물의 적정 이격거리를 산출하였으며, 경계요소법(Boundary Element Method)을 활용하여 방음벽의 다양한 높이와 형태에 의한 삽입손실을 시뮬레이션하였고 최적의 방음벽을 선정하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.49-56
• /
• 1999

This paper present a study on the application of sound pressure and vibration signals to detect the presence of defects in a rolling element bearing using a statistical analysis method. The well established statistical parameters such as the crest factor and the distribution of moments including kurtosis and skewless are utilized in this study. In addition, other statistical parameters derived from the beta distribution function are also used. A comparison study on the performance of the different types of parameter used is also performed. The statistical analysis is used because of its simplicity and quick computation. Under ideal conditions, the statistical method can be used to identify the different types of defect present in the bearing. In addition, the results also reveal that there is no significant advantages in using the beta function parameters when compared to using kurtosis and the crest factor for detecting and identifying defects in rolling element bearings from both sound and vibration signals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.103-108
• /
• 2004

In this study, examined heavy-weight floor impact sound to structure that have slab thickness of 4 form at a standard laboratory through noise and vibration measured. The results show that the nature Natural frequency increased according to change of thickness of each slab by finite element analysis, and acceleration value decreased. Results of measurements of noise and vibration at a standard laboratory, the slab 210, 240mm structures was construed result such as finite element analysis but the slab 150, 180mm structures is construed that influence in vibration acceleration level because edge condition has condition that contact to ground. Therefore, in modelling process for analysis, is thought that need that condition analyzes examining element influencing about structure that contact to ground.

• 소음진동
• /
• 제9권2호
• /
• pp.302-309
• /
• 1999

In this paper, a circular lined-duct is modeled by using an axisymmetric foam finite element, which is based on elastic porous material theory of Biot. For various thicknesses of three kinds of lining materials, finite element predictions are compared with measurement results and Morse's analytical results. While the analytical model has larger error as the lining becomes thicker, results of the present model have a good agreement with experimental results for all the thicknesses considered here. It has also been found that constraining the axial motion on the circumferential surface of the lining enhances sound attenuation at low freqneucies.

• 한국음향학회지
• /
• 제42권1호
• /
• pp.1-6
• /
• 2023

구조진동 소음 문제의 평가에 있어 방사소음은 중요한 물리적 특성으로 음향 인텐시티 측정으로 확인이 가능하지만, 시간이 오래 걸리고 까다로운 측정 조건 때문에 시험을 꺼리는 경향이 많다. 그 대안으로 시뮬레이션이 사용되고 있으며, 그 정확도도 높다. 문제는 방사소음 파워와 방사효율 같은 중요한 물리량을 얻기 위해서는 이를 계산해 주는 특정한 소프트웨어가 필요하다는 점이다. 본 연구에서는 이런 관점에서 일반적인 유한요소 해석 소프트웨어를 사용하여 방사소음 파워와 방사 효율을 계산하는 후처리 기법을 제안한다. 제안된 두가지 방법은 기본적으로 시험에서 사용하는 방법을 시뮬레이션에 활용하는 것이다. 첫번째 방법은 상반성 기법을 이용하는 것이며, 두번째 방법은 인접한 2개의 위치에서 계산된 음압을 이용하는 방법이다. 두가지 방법이 모두 효과적으로 방사소음 파워를 예측할 수 있음을 보였으며, 그 한계도 설명하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.237-242
• /
• 1999

In this study, a design method using plane actuator is developed to make new speaker system, whose shape is much thinner than that of conventional loudspeaker. Piezofilm(PVDF) is used as plane actuator of flat speaker. To avoid the distortion of sound radiated from flat speaker, the frequency response of radiated sound to be flat is taken as the design objective. The electrode pattern and orientation angle of piezofilm actuator is optimized to satisfy the design objective. The formulation is based on the coupled finite element and boundary element method. Genetic algorithm is used in the optimization process, which is useful in the optimization of discrete design variables. Frequency response with optimized piezofilm actuator is made flat enough to satisfy the design objective. For the enhancement of sound power, double-layered piezofilm actuators are also considered. The sound power with double-layered actuator becomes larger than that with single-layered actuator as expected.

• Structural Engineering and Mechanics
• /
• 제64권1호
• /
• pp.93-107
• /
• 2017

The article presents the vibration and acoustic responses of un-baffled doubly curved laminated composite panel structure under the excitation of a harmonic point load. The structural responses are obtained using a simulation model via ANSYS including the effect various geometries (cylindrical, elliptical, spherical and hyperboloid). Initially, the model has been established by solving adequate number of available examples to show the convergence and comparison behaviour of the natural frequencies. Further, the acoustic responses are obtained using an indirect boundary element approach for the coupled fluid-structure analysis in LMS Virtual.lab by importing the natural frequency values. Subsequently, the values for the sound power level are computed using the present numerical model and compared with that of the available published results and in-house experimentally obtained data. Further, the acoustic responses (mean-square velocity, radiation efficiency and sound power level) of the doubly curved layered structures are evaluated using the current simulation model via several numerical experimentations for different structural parameters and corresponding discussions are provided in detail.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.973-978
• /
• 2001

Noise reduction has become a major issue of the manufacturing industry. This paper describes the reduction of noise and vibration of rotary compressors. Empirical design for the present strap of the accumulator has been considered to be sufficient for the constraint of the accumulator resonance modes without thorough study. Recently, however, some researchers found out that the accumulator contributes considerably to the sound propagation. In this paper, the contribution of accumulator to the noise propagation is investigated through sound measuring experiments by checking the directivity of the noise. And, experimental modal analysis results show that frequencies of some resonance modes of the accumulator coincide with the highest peaks on sound spectrum. To demonstrate the reason for those resonance modes, a finite element analysis is conducted. Normal mode analysis of the finite element model of the rotary compressor shows the mechanism of the accumulator resonance modes.

• The Journal of the Acoustical Society of Korea
• /
• 제24권3E호
• /
• pp.115-122
• /
• 2005

Two twin microphones may produce particular patterns of binaural directivity by time delays between twin microphones. The boundary element method (BEM) was used for the simulation of the sound pressure field around the head model in order to quantify the acoustic head effect. The sound pressure onto the microphone was calculated by the BEM to an incident sound pressure. Then a planar directivity pattern was formed by four sound pressure signals from four microphones. The optimal binaural directivity pattern may be achieved by adjusting time delays at each frequency while maintaining the forward beam pattern is relatively bigger than the backward beam pattern.