• KIEAE Journal
• /
• 제16권1호
• /
• pp.47-55
• /
• 2016

Purpose: Long-life housing causes unavoidable cost increase while providing higher durability, flexibility, and repair easiness compare to those of normal apartment. The effectiveness should be evaluated considering the level of passing mandatory Long-life housing Certification System when supplying specific size of apartment complex. Thus, it is essential to identify the estimated costs and the obtainable grade by applying the optional element technologies selectively during the design phase. This study aimed to suggest the technology influence matrix(TIM) to support decision-making of element technologies in planning stage of long-life housing. Method: The technology influence matrix was established based on the property information about applicable element technologies for long-life housing such as construction methods, interface types, cost data, and certification-related characteristics. The usefulness of TIM was verified through case study, in which TIM was applied to the exclusive housing unit and the influences from four areas of quantity, cost, certification, and schedule were identified and calculated. Result: TIMs covering four areas representing the essential planning factors were developed, and are expected to contribute to sound decision-making in planning long-life housing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.190-193
• /
• 2005

The air filter in engine intake system filters the dirt in the breathing air but also it attenuates the noise although the phenomenon has been regarded negligible. For the analysis of the acoustical performance of air filter, an acoustical model is suggested in this paper. The air filter consists of a porous filter element, which catches the particulate dirt, and a plastic filter box, which supports the filter element. Fibrous structure of the filter element is modeled as a micro-perforated panel using the flow resistivity and porosity. The pleated geometry of the filter element is modeled as two coupled ducts and a mathematical model is developed for the analysis of sound propagation. The filter box Is modeled as a rigid rectangular box. By combining two models, a 4-pole transfer matrix for the air filter is derived. The transmission loss calculated using the transfer matrix of the suggested model is compared with the measured data. Reasonably good agreement is observed. The result can be improved by considering the visco-thermal effect in modeling, in particular at a frequency range near the troughs of TL curve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.309-313
• /
• 2000

A structural-acoustic coupling problem involving fluid in a cavity divided with flexible walls and porous materials is investigated in this paper. In many practical problems, the use of finite elements to discretize the fluid region leads to large stiffness and mass matrices. But, since the acoustic boundary element discretization requires to put elements only on the surface of structure, the size of matrices is reduced considerably. Here, we developed a numerical analysis program for the structural-acoustic coupling problems of the multi-region cavity, using boundary elements for the fluid regions and finite elements for the structure. By considering sound transmission through layered systems placed in a cavity, the accuracy of the coupled acoustical-structural finite element model has been verified by comparing its transmission loss predictions with analytical sloutions. Example problems are included to investigate the characteristics of the multi-region structural-acoustic coupling system with porous material.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.261-273
• /
• 2017

The control of the deformative behaviour of pre-stressed concrete roof elements for a satisfactory service performance is a main issue of their structural design. Slender light-weight wing-shaped roof elements, typical of the European heritage, are particularly sensitive to this problem. The paper presents the results of deformation measurements during storage and of both torsional-flexural and purely flexural load tests carried out on a full-scale 40.5 m long innovative wing-shaped roof element. An element-based simplified integral procedure that de-couples the evolution of the deflection profile with the progressive shortening of the beam is adopted to catch the experimental visco-elastic behaviour of the element and the predictions are compared with normative close-form solutions. A linear 3D fem model is developed to investigate the torsional-flexural behaviour of the member. A mechanical non-linear beam model is used to predict the purely flexural behaviour of the roof member in the pre- and post-cracking phases and to validate the loss prediction of the adopted procedure. Both experimental and numerical results highlight that the adopted analysis method is viable and sound for an accurate simulation of the service behaviour of precast roof elements.

• Computers and Concrete
• /
• 제33권6호
• /
• pp.643-658
• /
• 2024

To date, shell-solid and fibre element model analysis are the most commonly used methods to investigate the seismic performance of concrete-filled steel tube (CFST) bridge piers. However, most existing research does not consider the loss of bearing capacity caused by the fracture of the outer steel tube. To fill this knowledge gap, a refined finite element (FE) model considering the ductile damage of steel tubes and the behaviour of infilled concrete with cracks is established and verified against experimental results of unidirectional, bidirectional cyclic loading tests and pseudo-dynamic loading tests. In addition, a parametric study is conducted to investigate the seismic performance of CFST bridge piers with different concrete strength, steel strength, axial compression ratio, slenderness ratio and infilled concrete height using the proposed model. The validation shows that the proposed refined FE model can effectively simulate the residual displacement of CFST bridge piers subjected to highintensity earthquakes. The parametric analysis indicates that CFST piers hold sufficient strength reserves and sound deformation capacity and, thus, possess excellent application prospects for bridge construction in high-intensity areas.

• Elastomers and Composites
• /
• 제35권2호
• /
• pp.138-148
• /
• 2000

EPDM 발포체의 정적/동적 특성을 측정하여 재료 특성과 진동 특성과의 연관성을 알아보고 이로부터 충격음 저감재로서의 적용 가능성을 검토하였다. 정적/동적 특성은 material test system (MTS)를 사용하여 시편의 형상, 두께, 초기하중, 발포도 등에 따라 정적 탄성계수, 동적 탄성계수, 전달율의 변화를 조사하였다. 정적 탄성계수와 동적 탄성계수의 경우, 형상이 단순하고 두께가 얇을수록 큰 값을 나타냈고, 전달율과 동적 탄성계수는 상호 비례 관계에 있음을 확인할 수 있었다. 특징적으로 동적 탄성계수가 증가하면, 전달율의 특성 피크치는 같은 주파수 영역에서의 증가 혹은 고주파수 영역으로의 전이의 형태로 일어나게 되는 것을 알 수 있었다. 실험실적 모사 시험장치를 통해 충격에 따른 주파수별 진동 속도측정과 유한 요소 해석 모델을 사용하여 mode shape에 의한 충격 해석 결과를 알아보았는데, EPDM 발포체를 사용함으로써 2.5-3.5배의 진동 속도 저감이 이루어짐을 알 수 있었고, mode shape의 경우 몰타르와 콘크리트만으로 구성된 구조물에 비해 진동 충격에 대한 변위가 급감함으로써 충격음 저감재로서의 EPDM 발포체의 적용 가능성은 상당히 높은 것을 확인할 수 있었다.

• 한국음향학회지
• /
• 제41권4호
• /
• pp.375-388
• /
• 2022

본 논문은 다층 다공성 흡음재가 채워진 원통형 소음기의 음향투과손실을 구하는 과정을 다루었다. 다층다공성 흡음재 내부에서 전파되는 파동을 다루기 위해 Biot모델과 Johnson-Champoux-Allard-Lafarge(JCAL) 모델을 이용했다. 소음기 해석에 필요한 경계조건들을 얻었고 그것들을 토대로 수치적으로 모드를 구하는 과정을 설명했다. 얻은 모드들을 이용하여 2층 소음기에 대해 수치적인 실험을 진행했으며 처음 12개의 모드만으로도 음향투과손실이 수렴함을 보였다. 마지막으로 흡음재의 종류를 바꿔가면서 음향투과손실을 계산했고 이를 유한요소법을 이용한 결과와 비교함으로써 본 연구에서 제시한 모드 매칭법의 유효성을 검증했다.

• 한국음향학회지
• /
• 제29권3호
• /
• pp.191-199
• /
• 2010

물리적 모델링은 실제 악기음과 유사한 고음질의 음을 합성하는 방법이다. 그러나 물리적 모델링은 악기의 소리를 합성할 때 필요한 수많은 파라미터들을 동시에 계산해야 하기 때문에 동시 발음수가 높은 악기의 경우 실시간 처리에 문제가 발생할 수 있다. 이러한 문제를 해결하기 위해 본 논문에서는 기타의 음 합성 알고리즘을 실시간으로 처리 가능한 단일 명령어 다중 데이터 (Single Instruction Multiple Data, SIMD)처리 방식의 병렬 프로세서를 제안한다. 대표적인 현악기인 기타의 6개 현을 제어하기 위해 6개의 프로세싱 엘리먼트 (Processing Element, PE)로 구성된 SIMD기반 병렬 프로세서를 사용하였다. 각각의 프로세싱 엘리먼트는 해당되는 기타 현을 모델링하며, 각 현의 여기신호와 파라미터를 합성 병렬 알고리즘의 입력으로 받아 동시에 6개 현의 합성된 음을 실시간으로 생성할 수 있다. 표본화 비율을 44.1 kHz로 설정하고 16비트 양자화 데이터의 음을 합성한 모의 실험 결과, 제안한 SIMD기반 병렬 프로세서를 이용한 합성음은 원음과 매우 유사하였으며, 상용 프로세서인 TI사의 TMS320C6416보다 실행 시간에서 8.9배, 에너지 효율에서 39.8배의 성능 향상을 보였다.

• 경영과정보연구
• /
• 제2권
• /
• pp.23-46
• /
• 1998

In this paper, comparative and analysis of multimedia author tools for to proper compatible multimedia author tools on multimedia author tools function and usage, and which breach of contract each author tools specific property prepare to forecast future multimedia expansion trend on information technology expansion. Multimedia essential element is hardware(storage, digital video, CD), software, sound, hypertext and hypermedia etc. Analysis criteria of multimedia author tools is programming environment, which are card, script, icon, time method.

• 한국게임학회 논문지
• /
• 제2권1호
• /
• pp.84-91
• /
• 2002

The big difference of game scenario writers from ordinary scenario writers is the creativity of interactive game element. Game scenario writers should complete scenario form before making conti of game production, develop new item that is the essence of game and be able to write mulit-scenario for diverse story developments. Also, he should have the ability to advise on effective arrangement for sound effect to game designer.