• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.757-763
• /
• 2000

In vehicle exhaust systems the sound attenuation and the reduction of flow losses are often two competing demands. The present study considers a fully vehicle exhaust system and investigates experimentally both the sound attenuation and the flow performance of production configurations including the catalyst, the resonator, and the muffler. Dynamometer experiments have been This study is on the development of a new muffler composed of a valve system using an elasticity of spring. The valve system conducted with the daewoo 1500cc Lanos engine with speeds ranging from 1000 to 5000 rpm. Measurements include the flow rates, the temperatures and the absolute dynamic pressures of the hot exhaust gases at point locations. The present study describes the experimental aspects of an ongoing effort to validate and use the nonlinear fluid dynamic models in the time-domain for the prediction of the acoustic and power performance of firing internal combustion engines with full production exhaust systems.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.195-201
• /
• 2018

Three kinds of rubber compounds were prepared, and their underwater acoustical properties were investigated for anechoic coating. Dynamic mechanical properties of the rubber compounds were measured using a dynamic mechanical analyzer and extended to 100 kHz using time-temperature superposition. The sound speed, reflection coefficient, and attenuation constant were calculated. Silicone rubber showed the lowest reflection coefficient, and nitrile rubber showed the highest attenuation constant. The acoustic properties of nitrile rubber compounds with various compositions were investigated. The sound speed, reflection coefficient, and transmission coefficient of the nitrile rubber in the frequency range of 200-1000 kHz were measured in a water-filled tank.

• 한국컴퓨터정보학회논문지
• /
• 제19권5호
• /
• pp.37-42
• /
• 2014

본 연구의 목적은 170 dB 수준의 충격 소음원에서 주파수별 귀마개의 차음성능을 확인하고, 주파수 특성과 패턴 형상을 분석하는데 있다. 충격 소음에서의 Combat Arm Earplug와 3M Form types 1100 Earplug의 주파수별 귀마개 차음성능을 산출하였다. 차음성능을 확인하기 위해서 B&K Head and Torso Simulator와 Ear Simulator를 제작하여 충격 소음원의 주파수별로 차음성능을 비교하였다. 기존의 연구들은 충격 소음원이라 할지라도 대부분 140 dB 수준의 고충격 소음원이였으나, 본 연구는 그보다 더 높은 수준의 충격 소음원이라는 특징을 가지고 있다. 연구결과, 주파수별 충격소음의 차음효과는 평균 28.58 dB 인 것으로 나타났다.

• 한국음향학회지
• /
• 제31권4호
• /
• pp.244-252
• /
• 2012

본 연구의 목적은 골절 위험도가 높은 대퇴골에서 음속 및 광대역 초음파 감쇠와 같은 음향특성과 골밀도 사이의 상관관계를 조사하는 것이다. 이를 위해 0.5 및 1.0 MHz의 중심주파수를 갖는 두 쌍의 초음파 트랜스듀서와 함께 투과법을 이용하여 생체 외 조건에서 15개의 소 대퇴골 해면질골 샘플의 음속 및 광대역 초음파 감쇠를 측정하였다. 또한 마이크로 컴퓨터 단층촬영법을 이용하여 해면질골 샘플의 단위체적당 골밀도를 측정하였다. 골밀도는 0.5 및 1.0 MHz 초음파 트랜스듀서를 이용하여 측정된 음속 및 광대역 초음파 감쇠와 모두 강한 상관관계를 나타냈으며, 골밀도와 0.5 MHz 초음파 트랜스듀서를 이용하여 측정된 광대역 초음파 감쇠 사이에 가장 높은 상관관계가 존재하였다. 이와 같은 결과는 생체 외 조건의 대퇴골에서 측정된 음향특성이 대퇴골의 골밀도를 예측하기에 충분한 지표라는 것을 의미한다.

• The Journal of the Acoustical Society of Korea
• /
• 제23권3E호
• /
• pp.98-102
• /
• 2004

In 1896, Rayleigh was appointed as Scientific Advisor of the Trinity House. Rayleigh applied his knowledge of sound to developing effective fog signals during his IS-year tenure at the maritime organization. Rayleigh's expertise on acoustics met an appropriate field for its application during his improvement of the fog signal for the institution. Rayleigh's activities at the Trinity House were motivated by his desire to make contribution to the public. During his research on the fog signal, Rayleigh effectively employed his expertise acquired through his mathematical and experimental research on sound and vibration since the 1860s. Rayleigh developed effective horns for emitting fog signals and proposed various ways of overcoming the weaknesses of sound signals available at that time. While attempting to solve the problem of the attenuation of sound signals disseminating through the air, Rayleigh put foundations of atmospheric acoustics by developing new scientific theories about it.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.72-75
• /
• 2009

The Brillouin spectrum of 4'-n-pentyl-4-cyano-biphenyl (5CB) liquid crystals homogeneously confined in a planar liquid crystal (LC) cell was measured using a 6-pass tandem Fabry-Perot interferometer. By adopting a special right-angle scattering geometry, the sound velocity of 5CB was estimated from the Brillouin shift without knowing the refractive index. The sound velocity of the longitudinal wave propagating along the direction of the directors aligned parallel to the glass plates of the LC cell was 1784${\pm}$7 m/s at 300 K. The attenuation coefficient $\alpha$ was estimated to be approximately $1.9{\times}10^6m^{-1}$, which is about twice as large as that of the longitudinal sound wave propagating along the direction perpendicular to the directors. The present method may be very useful in the evaluation of the elastic properties of the materials used in display devices, whose refractive indices are not known.

• 방송공학회논문지
• /
• 제27권7호
• /
• pp.974-984
• /
• 2022

In this paper, we introduce the minimum and maximum distance setting methods used in geometric distance attenuation processing, which is one of spatial sound reproduction methods. In general, sound attenuation by distance is inversely proportional to distance, that is 1/r law, but when the relative distance between the user and the audio object is very short or long, exceptional processing might be performed by setting the minimum distance or the maximum distance. While MPEG-I Immersive Audio's RM0 uses fixed values for the minimum and maximum distances, this study proposes effective methods for setting the distances considering the signal gain of an audio object. Proposed methods were verified through simulation of the proposed methods and experiments using RM0 renderer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.165-166
• /
• 2010

• 한국조경학회지
• /
• 제18권3호통권39호
• /
• pp.1-9
• /
• 1990

Landscape plants as attenuator of vehicular noise were basically experimented with 8 kinds of trees and shrubs at the university nursery, and checked the attenuating effects by the planted distances, species and sound frequencies. The experimental results are shown and sumarized as follows ; 1. Most plants showed the considerable noise attenuating function in the sound frequencies of 63Hz and 1,000Hz. Tall trees such as Juniperus chinensis var. kaizuka and Magnolia grandiflora showed better effects than shrubs or small trees such as Gardenia jasminoides, Osmanthus fragnance, Osmanthrs heterophyllus, Rhododendron indicum, Chamaecyparis obtusa 'Tetragona Aurea' and Pinus paruiflora in 63Hz frequency, but shrubs showed better effects in 1,000Hz. 2. Trees showed 6~8dB attenuation and shrubs 4~5dB regardless an increase of distance between sound source and receiver in 63Hz. 10 meter width of tree belt could reduce 10 more dB, but 5 meter of shrub belt showed the same effect in 1,000Hz. 3. Trees having more leaves and wider crown showed constantly increase of attenuation of sound by the distance in 1,000Hz, and distinct increase of attenuation were observed in 2,000 more Hz.

• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 2005년도 제12차 학술발표회 초록집
• /
• pp.9-16
• /
• 2005

The electromagnetic (light) waves are limited to penetrate the media, ie, water and sea-bottom layers, due to high energy attenuation, but acoustic (sound) waves play as the good messenger to gather the underwater target information. Therefore the acoustic methods are applied to almost of ocean equipments and technology in terms of in-water and sub-bottom surveys, Generally the sound character is controlled by its frequency. In case that the sound source is low frequency, the penetration is high and the resolution is low. On the other hand, its character is reversed at the high frequency. The common character at the both of light and sound is the energy damping according to the travel distance increase.