• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.17-26
• /
• 1994

Poly(ethylene terephthalate)(PET) filaments were treated in binary mixtures of organic solvents such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), methanol/perchloroethylene (ME/PER), and methanol/trichloroethylene(ME/TRI). From the equilibrium swelling of PET, total and partial isotherms of PET for sorption of solvent mixtures and isotherms for distribution of the components between the phases were taken. Also the shrinkage and the crystallinity of PET treated with binary mixtures were investigated. The results obtained were summerized as follows: 1. All isotherms for distribution of the components between the phase deviated from the diagonal in system of PET-binary mixtures. Especially in the binary mixtures of ME/PER or ME/TRI, selectivo sorption of chlorinated hydrocarbon PER and TRI by PET occured. 2. The shrinkage of PET treated in binary mixrures was increased to compare with single solvent-treated, but the composition of binary mixtures corresponding to maximum values of shrinkage was not always agreed with the composition of binary mixtures corresponding to maximum values of shrinkage was not always agreed with the composition of binary mixtures exhibiting of the maximum swelling of PET. 3. The crystallinity of PET treated in binary mixtures generally increased than that of single solvent-treated.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.538-545
• /
• 2017

Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. The equilibrium properties of moisture are described by means of water vapor sorption isotherms, which illustrate the hysteretical behavior of materials. In this paper, the prediction method of the moisture distribution inside the concrete members at fire is presented. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member. And the moisture diffusivity model of high strength concrete by high temperature is proposed. To demonstrate the validity of this numerical procedure, the prediction by the proposed algorithm is compared with the test result of other researcher. The proposed algorithm shows a good agreement with the experimental results including the vaporization effect inside the concrete.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• Carbon letters
• /
• v.7 no.4
• /
• pp.249-258
• /
• 2006

Treatment of water hyacinth with sulphuric acid produces carbonaceous materials that have been used to remove Cu(II) and Cd (II) ions from aqueous solutions. Untreated water hyacinth was also used for the subject of comparison. The textural properties of the carbonaceous materials were determined from nitrogen adsorption at 77 K. The optimum pH for the sorption of Cu (II) and Cd (II) ions on the investigated sorbents was determined. Dynamic adsorption measurements have been taken at 298 K whereas equilibrium measurements were carried out at 298, 313 and 323 K. The adsorption of nitrogen at 77 K on the untreated sample was too low and the surface areas of the treated samples 2, 3 and 4 were found between $70-208\;m^2/g$. The total pore volumes of these samples which were determined for the carbonaceous materials investigated were found to be 0.076-0.140 ml/g. The kinetic adsorption data of Cu (II) and Cd(II) were applicable to both pseudo - first and pseudo-second order but fit more the latter order. The equilibrium adsorption data were found to fit Freundlich and Langmiur equations. The values of DG, DH and DS are all negative indicating the feasibility and the spontaneous nature of the sorption of Cu (II) and Cd (II) ions by the sorbents investigated.

• Advances in environmental research
• /
• v.2 no.4
• /
• pp.309-321
• /
• 2013

High AA new high capacity sorbent for preconcentration and determination of nickel in environmental samples was synthesized. The sorbent was synthesized by copolymerization of allyl glaycidyl ether / imminodiacetic acid with N,N-dimethylacrylamide as functional monomers in the presence of N,N-bismethylenacryl amid as cross linker and characterized by Fourier transform infra red spectroscopy, elemental analysis, thermogravimetric analysis and scanning electron microscopy. A recovery of 93.6% was obtained for the metal ion with 0.1 M, sulfuric acid as the eluting agent. The sorption capacity of the functionalized sorbent was 55.9 $mgg^{-1}$. The equilibrium sorption data of Ni(II) on polymeric sorbent were analyzed using Langmuir, Freundlich, Temkin and Redlich.Peterson models. Based on equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined 0.87 (L mg-1), 25.87 ($mgg^{-1}$) $(Lmg^{-1})^{1/n}$ and 171.4 ($Jmol^{-1}$) respectively at pH 4.5 and $20^{\circ}C$.

• Environmental Engineering Research
• /
• v.18 no.1
• /
• pp.45-53
• /
• 2013

Biocarrier beads with dead biomass, Bacillus drentensis, immobilized in polymer polysulfone were synthesized to remove heavy metals from wastewater. To identify the sorption mechanisms and theoretical nature of underlying processes, a series of batch experiments were carried out to quantify the biosorption of Pb(II) and Cu(II) by the biocarrier beads. The parameters obtained from the thermodynamic analysis revealed that the biosorption of Pb(II) and Cu(II) by biomass immobilized in biocarrier beads was a spontaneous, irreversible, and physically-occurring adsorption phenomenon. Comparing batch experimental data to various adsorption isotherms confirmed that Koble-Corrigan and Langmuir isotherms well represented the biosorption equilibrium and the system likely occurred through monolayer sorption onto a homogeneous surface. The maximum adsorption capacities of the biocarrier beads for Pb(II) and Cu(II) were calculated as 0.3332 and 0.5598 mg/g, respectively. For the entire biosorption process, pseudo-second-order and Ritchie second-order kinetic models were observed to provide better descriptions for the biosorption kinetic data. Application of the intra-particle diffusion model showed that the intraparticle diffusion was not the rate-limiting step for the biosorption phenomena. Overall, the dead biomass immobilized in polysulfone biocarrier beads effectively removed metal ions and could be applied as a biosorbent in wastewater treatment.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.2
• /
• pp.149-158
• /
• 1998

Biomass of non-living brown seaweed Sargassun fluitans pretreated with NaOH is capable of taking up more than $10\%$ $(q_{max}$ : 3.85 mmol/g for Al and 1.48 mmol/g for Cu) of its dry weight in the Al and Cu at pH of 4.5. However, the maximum Al and Cu uptakes calculated from Langmuir isotherm were 1.58 mmol/g for Al and 1.35 mmol/g for Cu at pH 3.5. Equilibrium batch sorption study was performed using two-metal system containing Al and Cu. The mathematical model of the two-metal sorption system enabled quantitative estimation of one-metal biosorption inhibition due to the influence of a second metal. NaOH-treated S. fluitans contained 2.19 mmol $(43\;wt.\%)$ carboxyl groups per gram of biomass. A modified form of Langmuir, which assumes binding of Cu as $Cu^{2+}$ and Al as $Al(OH)_2^+,$ was used to model the experimental data. This result agrees with the one of mono-valent sorption for Al in single-metal system. The modified Langmuir model gives the following affinity correlated coefficients: 0.196 for Cu and 6.820 for Ah at pH 4.5, and 2.904 for Cu and 3.131 for Al at pH 3.5. The interference of Al in Cu biosorptive uptake was assessed by `cutting' the three dimensional uptake isotherm surfaces at constant second-metal final concentrations. Equimolar final equilibrium concentrations of Cu and Al of 1 mM at pH 4.5 give Cu and hi uptakes reduced by $82.5\%\;and\;5.4\%,$ respectively. However, these values at pH 3.5 were $55\%\;(Cu)\;and\;31\%$ (Al).

• Advances in environmental research
• /
• v.8 no.1
• /
• pp.23-38
• /
• 2019

In this study, Malachite Green (MG) dye removal from synthetic wastewaters by adsorption process using raw boron enrichment waste (BEW) and it's modifications (with acid and ultrasound) were aimed. 81% MG removal was obtained by BEW at optimum equilibrium conditions (time: 40 min., dosage: 500 mg/dm³, pH: 5-6, speed: 200 rpm, 298 K). MG removal from wastewaters using acid modified boron enrichment waste (HBEW) was determined as 82% at optimum conditions (time: 20 min., dosage: 200 mg/dm³, pH: 10, speed: 200 rpm, 298 K). For ultrasound modified BEW (UBEW), the highest MG removal percent was achieved as 84% at optimum conditions (time: 30 min, dosage: 375 mg/ dm³, pH: 8, speed: 200 rpm, 298 K). The equilibrium data of Malachite Green was evaluated for BEW, HBEW and UBEW adsorbents by using sorption isotherms such as Langmuir, Freundlich and Temkin models, out of which Langmuir model (R² = 0.971, 0.987 and 0.984) gave better correlation and maximum adsorption capacity was found to be 147.05, 434.78 and 192.30 mg/g, respectively. The adsorption kinetics followed the pseudo-second-order kinetic equation for sorption of MG onto wastes. A look at thermodynamic data reveals that natural sorption is spontaneous and endothermic because of free negative energy exchange and positive change in enthalpy, respectively. The results indicated that boron enrichment waste, and HCl and ultrasound-modified boron enrichment waste served as good alternative adsorbents in dye removal from wastewater.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.176-180
• /
• 1987

The sorption characteristics of dried garlic flakes stored at various relative humidity and storage temperature were studied. At low relative humidity below RH 51%, the sorption equilibrium was easily attained, whereas at higher relative humidity above RH 67%, the flakes were browned by higher equilibrium moisture content. The flakes were browned at relative humidity above 67% at $20^{\circ}C$ and $35^{\circ}C$, above 84% at $5^{\circ}C$, respectively. The moisture contents of monolayer value for the flakes were ranging from 5.80% to 6.20% (DB) with varying temperatures. And the necessity of moisture-proof packaging material suggested for the long term storage of the flakes because the lower moisture content and storage temperature, the higher driving force of wetting. Regression equation for browning rate prediction with relative humidity and storage temperature of the flakes was determined.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.817-823
• /
• 1990

The sorption characteristics of red pepper powders in terms of mixing ratio of seeds to red pepper powders were investigated at various relative humidities and temperatures as storage conditions. At lower relative humidity below 43% RH, the sorption equilibrium was easily reached regardless of mixing ratio, whereas at higher relative humidity above 75%, the powders gained moisture rapidly, resulting in the color change to brown. At extremely lower RH below 33%, decoloration occurred in red pepper powder. The moisture contents of monolayer value for red pepper powders without seeds were ranging from 5.88% to 7.35% inversely proportional to the temperature. The moisture contents of monolayer value decreased with increase of mixing ratio of seeds.