• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3391-3398
• /
• 2013

The carboxylated multiwall carbon nanotubes (MWCNT-COOH) and functionalized with isatin derivative (MWCNT-isatin) have been used as efficient adsorbents for the removal of lead (Pb) from aqueous solutions. The influence of variables including pH, concentration of the lead, amount of adsorbents and contact time was investigated by the batch method. The adsorption of the lead ions from aqueous solution by modified MWCNTs was studied kinetically using different kinetic models. The kinetic data were fitted with pseudo-first-order, pseudo-second-order, and intra-particle diffusion models. The sorption process with MWCNT-COOH and MWCNT-isatin was well described by pseudo-second-order and pseudo-first-order kinetics, respectively which it was agreed well with the experimental data. Also, it involved the particle-diffusion mechanism. The values of regression coefficient of various adsorption isotherm models like Langmuir, Freundlich and Tempkin to obtain the characteristic parameters of each model have been carried out. The Langmuir isotherm was found to best represent the measured sorption data for both adsorbent.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.108-112
• /
• 1984

The sorption characteristics of red pepper powder stored at various relative humidity and temperature were studied. At low relative humidity below RH 57%, the sorption equilibrium was easily attained, whereas at higher relative humidity above RH 75%, the powder was browned by higher equilibrium moisture content. The moisture content of monolayer value for the powder was ranging from 11.32% to 12.13% with temperature. First order regression equation of equilibrium moisture content for relative humidity was determined.

• Advances in environmental research
• /
• v.1 no.2
• /
• pp.167-179
• /
• 2012

Pistachio shell (Pistacia vera) (PS), a low-cost material, has been utilized for the removal of the Cr(VI) ions after treatment with citric acid. Batch experimental steps were applied to obtain Cr(VI) ion adsorption details for the equilibrium between Cr(VI) and modified pistachio shell (MPS). The influences of contact time, pH, adsorbent dose and initial chromium concentration on the adsorption performance of MPS was investigated in detail. The results displayed that adsorption of Cr(VI) by MPS reached to equilibrium after 2 h and after that a little change of Cr(VI) removal efficiency was observed. The sorption percent is higher at lower pH and lower chromium concentration. Two possible mechanisms for reduction of Cr(VI) to Cr(III) can be suggested in Cr(VI) removal. In the first mechanism, Cr(VI) is reduced to Cr(III) by surface electron-donor groups of the adsorbent and the reduced Cr(III) forms complexes with adsorbent or remains in the solution. This Cr(III) is not adsorbed by adsorbent at pH 1.8. But in second mechanism, the adsorption-coupled reduction of Cr(VI) to Cr(III) occurred on the adsorbent sites. The equilibrium sorption capacity of Cr(VI) ion after 2 h was 64.35 mg/g for MPS.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.21-29
• /
• 2008

Sorption and desorption processes play an important role in the transport and fate of organic contaminants in subsurface system. In this study, sorption and desorption characteristics of atrazine in 7 soils selected at the Gwangju area were investigated. Soil organic carbon contents ranged from 0.42 to 2.82%. Sorption and desorption experiments were performed in batch slurries. Sorption distribution coefficient ($K_d$) of atrazine were ranged from 0.48 to 3.26 l/kg and $K_d$ value increased with increasing organic carbon contents except of Kyongbang and Youngdong soils. Single desorption data were analyzed by the three-site desorption model including equilibrium, non-equilibrium and non-desorbable site. Non-desorbable site fractions of atrazine in all soils were enumerated and non-desorbable atrazine was observed in seriesdilution desorption experiment. Sorption/desorption hysteresis was also observed in the series-dilution desorption experiment.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.295-303
• /
• 2003

Sorption kinetics of hydrophobic organic compounds (chlorobenzene and phenanthrene) in natural wetland soils was investigated using laboratory batch adsorbers. One -site mass transfer model (OSMTM) and two compartment first-order kinetic model (TCFOKM) were used to analyze sorption kinetics. Analysis of OSMTM reveals that apparent sorption equilibria were obtained within 10 to 75 hours for chlorobenzene and 2 hours for phenanthrene, respectively. For chlorobenzene, the sorption equilibrium time for surface soil was longer than that of deeper soil presumably due to physico-chemical differences between the soils. For phenanthrene, however, no difference in sorption equilibrium time was observed between the soils. As expected from the number of model parameters involved, the three-parameter TCFOKM was better than the two-parameter OSMTM in describing sorption kinetics, The fraction of fast sorption ($f_1$) and the first-order sorption rate constants for fast ($k_1$)and slow ($k_2$) compartments were determined by fitting experimental data to the TCFOKM. The results of TCFOKM analysis indicate that the sorption rate constant in the fast compartment($k_1$) was much greater than that of slow fraction($k_2$) . The fraction of the fast sorption ($f_1$) and the sorption rate constant in the fast compartment($k_1$) were increasing in the order of increasing $k_{ow}$, phenanthrene > chlorobenzene. The first-order sorption rate constants in the fast ($k_1$) and slow ($k_2$) compartments were found to vary from $10^{-0.1}\;to\;-10^{1.0}$ and from $10^{-4}\;to-10^{-2}$, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.4
• /
• pp.43-50
• /
• 2011

Steel-making slag was investigated as reactive material for removal of cadmium in coastal area. Batch experiments of the sorption isotherm experiment and kinetic sorption experiment were performed. Result of sorption isotherm was more adequately described by Langmuir model than Freundlich model and theoretical maximum capacity (${\beta}$) of cadmium onto steel-making slag was found. Results of kinetic sorption experiments were evaluated by pseudo second order model to investigate sorption characteristics of cadmium onto steel-making slag. Results showed that the equilibrium sorption amount of cadmium (q$q_e$) increased and the rate constant ($k_2$) and initial sorption rate (h) decreased as the initial cadmium concentration increased. The $q_e$ with simulated sea water was similar to that with deionized water and $k_2$ and h with simulated sea water was lower than those with deionized water. Results of kinetic experiments could be used to predict the result from sorption isotherm, since equilibrium sorption amounts calculated by pseudo second order model generally agreed with those measured from sorption isotherm. The reaction time for the target removal rate could be calculated by the pseudo second order model using kinetic sorption tests results.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.1
• /
• pp.14-19
• /
• 1997

Laboratory experiments were conducted to study the effects of pH and salt level on the soil sorption equilibrium of pentachlorophenol (PCP) which is hydrophobic and ionogenic. Experimental results indicated that the sorption equilibrium constant (Kp) of PCP increased with decreasing pH. A quantitative sorption model involving linear isotherms was estabilished to predict the pH effect on the PCP sorption equilibrium over the pH range from 3 to 8. The model prediction was in good agreement with the experimental data. Also, the Kp increased with salt concentration over the entire pH range. At added salt levels less than 0.1M, increase in Kp was larger than when the added levels were higher than 0.1M. Salt might increase the PCP sorption by inducing 'salting out-effect' or by forming deprotonated PCP-cation ion pairs such as PCP$\^$-/K$\^$＋/. Taking the pH range (5-8) and the salt content (up to 50 g/L) in the groundwater of Metropolitan landfill sites into consideration, the results indicated that the retardation factor of PCP in this area might range from 3 to 550 depending upon pH and salt content.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.9
• /
• pp.37-45
• /
• 2010

Sorption characteristics of arsenic on furnace slag were investigated to remove arsenic from groundwater using furnace slag, which is industrial waste generated from steel company. Adsorption isotherm experiments and kinetic sorption experiments were performed and the chemical characteristics of supernatants from these experiments were analyzed. Results showed that all supernatants were alkaline (above pH 9) and the highest ion concentration in the solution was found with calcium (30~50 mg/L). Results of adsorption isotherms were more adequately described by the Freundlich model than Langmuir model. From adsorption isotherms experiments, it was noted that the adsorption amount of As(V) was 87% higher than that of As(III). Results of kinetic sorption experiments were more properly fitted by pseudo second order (PSO) model than pseudo first order model. Equilibrium adsorption amount ($q_e$) and relaxation time ($t_r$) calculated from PSO model increased with initial concentration of arsenic. Equilibrium adsorption amount of As(V) was higher than that of As(III) and relaxation time of As(V) was shorter than that of As(III). Adsorption isotherm results could be predicted by kinetic adsorption results, since equilibrium adsorption amount calculated through PSO model generally agreed with equilibrium adsorption amount measured from adsorption isotherm.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1980

The sorption characteristics of red pepper powder were analyzed in respect to its storing humidities and the types of powder product. The sorption rate of the powder was affected by the humidity values under which it was stored. At low relative humidity values below 70% RH the sorption equilibrium was easily attained, but at the higher humidity over 75% RH the equilibrium state was not reached even after a long period of storage. From the estimation of the sorption rate at arbitrary humidity an empirical equation was obtained; In ${\frac{dw}{dt}}=n\;ln(t)+ln\;c$, where w is moisture content(%) absorbed, t is time (hour) and n and c are empirical constants which were determined from empirical data. Particle sizes and drying methods of red pepper showed little effect on the sorption behavior.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.50-54
• /
• 1986

The sorption characteristics of green tea were investigated at $20^{\circ}C$ with various relative humidities. Particle size showed little effect on the sorption behavior of green tea. At low relative humidities below 57%, the sorption equilibrium were easily attained, but a high relative humidities above 75%, the sorption equilibrium were not reached after 10 days. From the estimation of sorption rate at arbitrary humidities an empirical equation was obtained; $Ln{\frac{dw}{dt}}=nLn(t)+Lnc$ The monolayer moisture contents of green tea obtained by B.E.T. equation were found to be 7.87%(powder) and 7.01%(whole), respectively.