• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.61-64
• /
• 2002

We have optimally designed and implemented by a monolithic microwave integrated circuit(MMIC) the low noise amplifier(LNA) of 5.8GHz band composed of receiver front-end(RFE) in a on-board equipment system for dedicated short range communication using a depletion-mode GaAs MESFET. The LNA is provided with two active devices, matching circuits, and two drain bias circuits. Operating at a single supply of 3V and a consumption current of 18㎃, The gain at center frequency 5.8GHz is 13.4dB, Noise figure(NF) is 1.94dB, Input 3rd order intercept point(lIPS) is 3dBm, and Input return loss(5$_{11}$) and Output return loss(S$_{22}$) is -l8dB and -13.3dB, respectively. The circuit size is 1.2$\times$O.7$\textrm{mm}^2$.EX>.>.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.4
• /
• pp.368-378
• /
• 2020

In the paper, corrosion behavior of T91 steel in different concentrations of NaHSO₃ solution was studied in combination with scanning electron microscope (SEM) and electrochemical measurements. The results showed that the steel exhibited active anodic dissolution characteristics in the solution, and NaHSO₃ concentration affected both cathodic and anodic behaviors. The steel surface was covered by intact corrosion products in the solutions, but the compactness and mechanical properties of the corrosion products degraded with the increase of NaHSO₃ concentration. In low-concentration NaHSO₃ solution the steel tended to undergo uniform corrosion with slight corrosion pits, but its corrosion mode gradually transited to localized corrosion as the NaHSO₃ concentration increased. The mechanical property degradation of the corrosion products caused by sulfur compounds and the pH decrease of the solution are the important factors to accelerating its corrosion process.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.258-265
• /
• 1995

Regeneration process of edaphic pine(Pinus densiflora) climax forest in Bulyung-gyegog, Uljin-gun, Kyungsangbuk-do, was studied. The height of dominant trees in the stands are 12 15m. Upper layers are highly dominated by pine trees and are randomly distributed. Pine trees in lower layer grow in a patch type. In the upper layer, the age distribution is likely one model type with mode of 60 and 80 years. In the horizontal distribution of these trees, some of the even-aged cluster constituted of several tree were found. For the first 25 years, the stem diameter increment rates in upper layer are higher than those in the middle layer. It could be concluded that after the forest canopy had been broken out, the seedlings established densely in a patch in the gap with the decreasing density and some of them, distributed in random, would constitute the canopy.

• Composites Research
• /
• v.29 no.5
• /
• pp.249-255
• /
• 2016

The fiber metal laminates have been widely used at aerospace industry due to outstanding fatigue characteristic, corrosion resistance and impact resistance and so forth. The objective of this research is to establish the proper manufacturing variables for enhancing the interfacial energy release rate of fiber metal laminates using Taguchi method. The major variables of the manufacturing process are surface treatment, pre-specified temperature holding time and additional pressure. In order to determine the interfacial adhesive strength, the double cantilever beam and end-notched flexure tests were conducted. Afterward, Mode I and II energy release rates at various conditions were introduced signal-to-noise ratio with respect to each condition. Finally, the most efficient manufacturing variables are recognized using larger-the-better characteristic.

• Food Science and Biotechnology
• /
• v.14 no.2
• /
• pp.200-206
• /
• 2005

Effect of quercetin on NO production and regulation mode of quercetin on oxidative stress, $NF{\kappa}B$ activation, and iNOS expression, possible mechanisms of NO suppression in LPS-stimulated macrophages were investigated. Treatment of RAW 264.7 cells with quercetin significantly reduced lipopolysaccharide (LPS)-stimulated nitric oxide (NO) production dose-dependently ($IC_{50}$, $9.2\;{\mu}M$). Expression of iNOS and specific DNA binding activities of nuclear factor kB ($NF{\kappa}B$) were significantly suppressed by quercetin pretreatment. Quercetin reduced thiobarbituric acid-reactive substances (TBARS) accumulation, enhancing GSH level and antioxidant activities of enzymes, such as superoxide dismutase (SOD) and catalase. These results demonstrate quercetin may ameliorate inflammatory diseases by suppressing NO production through inhibition of iNOS expression, $NF{\kappa}B$ transactivation, and oxidative stress, which may be mediated partially by antioxidative effect of quercetin. Thus, quercetin appears to be used as a potential therapeutic agent for treating LPS-induced inflammatory processes.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.179-191
• /
• 2018

This study is aimed at investigating the dynamic performance of a composite building structure under seismic ground motions. The building structure is an official fire department building located in southern Taiwan. It is composed of a seven-story reinforced concrete (RC) and an eight-story steel reinforced concrete (SRC) frame. Both frames share a common basement and are separated by expansion joints from the first to the seventh floor. Recorded floor accelerations of the building structure under eight earthquakes occurring during the period from 2011 to 2013 were examined in this paper. It is found that both frames had similar floor acceleration amplifications in the longitudinal direction, while the SRC frame revealed larger response than the RC frame in the transverse direction. Almost invariant and similar fundamental periods under the eight earthquakes in both directions were obtained from their transfer functions. Furthermore, numerical time-history simulations were carried out for the building structure under the most intensive earthquake. It is realized that the seismic response of the composite building was dominated by the first translational mode in each horizontal direction. Higher modes did not significantly contribute to the structural response. The conventional Rayleigh damping model could be appropriately applied to the time-history simulations under bi-directional excitations. Approximate floor acceleration envelopes were obtained with a compound RC and SRC structural model by using the average damping ratios determined from the different structural arrays.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.537-540
• /
• 1992

This paper presents Samsung CNC (Computer Numerical Controller) system with an intel 80486/487 as the main CPU and a 32 bit floating point DSP(Digital Signal Processor) TMS320C30 as the motion control CPU. The Samsung CNC system diverse user-frienly characteristics such as multi-tasking, powerful menu system, internal PLC system, and 2/3 dimensional graphics in wire and solid mode. The main CPU executes central processing program, user interface program, interpreter, BMI, etc while the motion control CPU carries out some interpolations, acceleration/deceleration, and PID control algorithm with feedforward terms. Complex interpolations except linear and circular ones are performed on the main control CPU. The experimental results for the circular interpolation under linear acceleration/deceleration shows that the proposed CNC system can be widely used in controlling machining centers with good machining accuracy.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.490-494
• /
• 2004

Bragg gratings were fabricated in Ge-doped silica planar lightwave circuits (PLC) for different writing conditions to study the growth characteristics. The refractive index modulation of the gratings grew in the PLC with total fluence F according to the power law $\Delta$n=A $F^{B}$. The characteristics of the PLC gratings formed for external cavity lasers match closely to those predicted by the power law. The oscillation spectra of the FP-LD with a Bragg grating grown in the PLC waveguide were also presented.d.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.87-100
• /
• 2005

In this paper, we propose a new selective temporal error concealment algerian best suited for H.264/AVC. The proposed algorithm performs selective temporal error concealment depending on whether the lost block is at background or foreground. It the corrupted macroblock is decided as at background, then the simple temporal replacement is performed. Also we propose replacing a lost block at foreground with the selective average of respectively estimated blocks from the multiple reference frames. This paper supposes error-corrupted H.264/AVC video bitstreams over CDMA2000 (or UMTS) air interface. It is shown that under Flexible Macroblock Ordering (FMO) coding of H.264/AVC, the proposed algorithm provides PSNR gain up to 1.18dB compared to built-in algorithm in the K264/AVC test model. In addition, the proposed error concealment method has average PSNR improvement of 0.33dB compared with that under N-slice coding mode. The proposed algorithm also provides better subjective video quality than other conventional error concealment algorithms.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.4
• /
• pp.513-525
• /
• 2019

In Seoul, the subway system has been in use since 1974 and is the most frequently used travel mode accounting for approximately 40% of passenger journeys in 2015. As such the subway system is widely adopted by people and therefore, can have great impacts on their everyday life. However, it is easily noted that transit resources are not distributed spatially uniform, in other words, not all parts of the city gain the same benefits from their networks. This study aims to examine the inequity of spatial distribution of subway networks based on accessibility. Accessibility of subway networks are calculated based on the time-distance between stations and then equity is measured using the Gini index. Resulted map of subway accessibility shows that the benefits are not evenly distributed in Seoul with a pattern of highly accessible core - less accessible periphery areas. Also the subway accessibility network has fairer distribution against the employees' distribution rather than the distribution of general population or possibly transit dependent groups.