• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.133-140
• /
• 2016

In active sonar field, a target detection and localization based on a distributed sensor network has been much studied for the underwater surveillance of the coast. Zhou et al. proposed a target localization method utilizing the positions of target-detected sensors in distributed sensor network which consists of detection-only sensors. In contrast with a conventional method, Zhou's method dose not require to estimate the propagation model parameters of detection signal. Also it needs the lower computational complexity, and to transmit less data between network nodes. However, it has large target localization error. So it has been modified for reducing localization error by Ryu. Modified Zhou's method has better estimation performance than Zhou's method, but still relatively large estimation error. In this paper, a target localization method based on modified Zhou's method is proposed for reducing the localization error. The proposed method utilizes the geometry of the positions of target-detected sensors and a line that represents the bearing of target, a line can be found by modified Zhou's method. This paper shows that the proposed method has better target position estimation performance than Zhou's and modified Zhou's method by computer simulations.

• Electronics and Telecommunications Trends
• /
• v.28 no.6
• /
• pp.167-179
• /
• 2013

측면주사음탐기(side scan sonar) 센서는 해저면의 영상을 실시간으로 탐색하는 장비로서 해양탐사 및 지질조사, 해저통신 및 어초조사, 기뢰 및 잠수정 탐색 등 해양탐사와 관련한 대표적 장비라고 할 수 있다. 센서는 해저와 목표물을 표시하기 위해 소나 플랫폼의 움직임을 사용하며, 동작주파수 범위는 20kHz~500kHz이다. 이 주파수는 요구되는 깊이와 목표물의 크기에 의해서 결정된다. 센서는 수직으로 $45^{\circ}$, 수평으로 $2^{\circ}$ 정도의 신호전파 방사각도 폭을 가진다. 최근에는 해양탐사와 개발을 위해 빠른 스캔속도와 정확한 정보, 고해상도의 영상을 얻기 위해 해저면에 대한 다중빔 영상센서의 핵심기술로 활용되면서 그 활용성과 중요성이 점차 증가되고 있다. 본고에서는 측면주사소나 센서의 기본 원리 및 종류, 디중빔측면주사소나 기술동향, 응용분야의 사례를 소개함으로써, 국내 기반기술 및 상용화 개발이 취약한 측면주사 음탐기 센서에 대한 이해를 돕고자 한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.664-674
• /
• 2009

This paper presents the theoretical development of a complete navigation problem of a non-holonomic mobile robot by using sonar sensors. To solve this problem, a new method to compute a fuzzy perception of the environment is presented, dealing with the uncertainties and imprecision from the sensory system and taking into account nonholonomic constraints of the robot. Fuzzy perception, fuzzy controller are applied, both in the design of each reactive behavior and solving the problem of behavior combination, to implement a fuzzy behavior-based control architecture. Different experiments in populated environments have proved to be very successful. Our method is able to guide the mobile robot named KUM-Robo safety and efficiently during long experimental time.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.283-285
• /
• 2021

본 논문에서는 수중에서 선박 하부에 붙은 오손생물(fouling organism)을 탐지하고 격자지도(grid map)로 나타내는 시스템을 제안한다. 제안하는 시스템은 소나(sound navigation and ranging: SONAR) 센서와 오손생물사이의 시간 데이터를 수집한 후, 라즈베리 파이 4(raspberry pi 4)에서 수집된 데이터를 이용해 격자지도에 맵핑(mapping)함으로써, 선저하부의 상태를 파악하는데 도움을 줄 수 있다. 본 논문에서는 제안된 지도 시스템을 이용하여 선박 하부에 붙은 오손생물의 분포를 확인할 수 있다.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.313-319
• /
• 2023

In this study, we propose a method to improve the accuracy of acoustic odometry using optimal frame interval selection for Fourier-based image registration. The accuracy of acoustic odometry is related to the phase correlation result of image pairs obtained from the forward-looking sonar (FLS). Phase correlation failure is caused by spurious peaks and high-similarity image pairs that can be prevented by optimal frame interval selection. We proposed a method of selecting the optimal frame interval by analyzing the factors affecting phase correlation. Acoustic odometry error was reduced by selecting the optimal frame interval. The proposed method was verified using field data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.7
• /
• pp.564-572
• /
• 2002

This article describes the ultrasonic range sensor for the recognition of the Indoor environment, especially utilizing the multiple reflection properties of the sonar usually ignored as disturbances or noises. In this paper, we endow the ultrasonic range sensor with the active motion using the stepping servomechanism in order to get the multiple reflections with environment objects. Environment features such as target type, distance and azimuth based on the scanned one frame data of that multiple reflection patterns are recognized simultaneously.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.41-49
• /
• 2014

Detection and processing techniques for small objects on seabed by the active synthetic aperture sonar can be increased the detection performance because it can be used by short sensor array in small unmanned underwater systems that are spatially constrained. But the limited conditions on constant speed and straight movement of the platform cause a large error in the number of external environmental factors and exact phase synthesis process. In this study, analyzed the applicability of active synthetic aperture processing that is mounted on such a system, and compared detection resolution change in accordance with the phase difference mismatch caused by the along track disturbance. Various simulations were performed as a coherently focus processing model by adding along track disturbance mismatched parameter on the configuring simulator. As the result, detection performance of active synthetic processing for small objects on seabed was found a number of changes by the phase difference mismatch errors according to track disturbances and S/N ratio variations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2162-2166
• /
• 2016

This paper describes the implementation of AUSV system for sonar image acquisition to survey the seabed. The system is controlled by Feed Forward PID algorithm on the vessel for bearing of the thrusters composed of motion sensor and DGPS which calculates the differences between the current location and the destination location for longitude and latitude based on GPS coordinates. As experimental results, the bearing control performance is good that the error distance from the destination positions are under 6m in total survey track of 1km. And the sonar image deviation of a object is under 12 pixels from the manned survey method, which the comparison with the total image quality is almost the same as the manned survey one. Thus the proposed AUSV system is a new method of system can be utilized at the limited survey areas as the surveyor should not be able to approach on sea surface by onboard vessel.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.134-141
• /
• 2014

Mobile robots use various sensors for navigation such as wheel encoder, vision sensor, sonar, and laser sensors. Dead reckoning is used with wheel encoder, resulting in the accumulation of positioning errors. For that reason wheel encoder can not be used alone. Too much information of vision sensors leads to an increase in the number of features and complexity of perception scheme. Also Sonar sensor is not suitable for positioning because of its poor accuracy. On the other hand, laser sensor provides accurate distance information relatively. In this paper we propose to extract the angular information from the distance information of laser range finder and use the Kalman filter that match the heading and distance of the laser range finder and those of wheel encoder. For laser scanner with one feature point error may increase much when the feature point is variant or jumping to a new feature point. To solve the problem, we propose to use two feature points and show that the positioning error can be reduced much.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2586-2592
• /
• 2014

Lost fishing gears become a major cause of marine pollution, and many policy and technical efforts have been conducted for that. For efficient retrieving lost fishing gears in underwater, It is important to know the current position. Using GPS in the sub-sea environment is impossible and localization requires the use of special systems, and mobility due to water currents for underwater localization also has to be considered. In this paper, described with respect to the system for a self-generated location informations without using an external signal, such as a GPS and Sonar and storing them. Using the characteristics of the geomagnetic and INS principle, proposed informations and a way for estimating self position during movement. Embedded based system suggested and implemented in this study is tested for validating it's functionality.