• Bulletin of the Korean Chemical Society
• /
• 제19권3호
• /
• pp.349-353
• /
• 1998

Solvolysis rates of substituted 2-aryl-1,1-dimethylethyl bromides (1) were determined in a variety of solvents such as aqueous mixtures of ethanol, acetone, 2,2,2-trifluoroethanol, and also mixtures of ethanol and TFE at 25 ℃, 35 ℃, and 45 ℃. The solvent effects were analyzed in terms of Winstein-Grunwald equation. The solvent effects of 1-4-MeO failed to give a single linear correlation against either Y or YCl (YBr), but exhibited a wide split pattern which could not be related to the solvent nucleophilicity. On the other hand 1-4-CH3 and 1-H gave a fairly good linearity. In the case of 1-4-MeO, a fairly good linearity was observed against YΔ defined from the solvolysis of 4-methoxyneophyl tosylate. It is assumed that resonance interaction between reaction site and aryl-π-system operates to give charge delocalization regardless of the different solvolysis mechanisms. The Hammett-Brown treatment of the solvolytic rate constant of compounds 1 was obtained non-linear two separated lines of - 1.06 to - 1.46, suggesting of mechanistic changeover from kc-ks to kΔ on going from electron-withdrawing to electron-donating substituents as a basis of 4-CH3 group.

• 한국환경과학회지
• /
• 제32권6호
• /
• pp.477-482
• /
• 2023

Halloysite nanotube (HNT) has a nanotube structure with the chemical formula of Al₂Si₂O₅(OH)₄ · nH₂O and is a natural sediment of aluminosilicate. A lot of research has been conducted to improve the mechanical properties of epoxy composites by generating interactions between HNTs and polymers through surface treatment of HNTs, such as exchange of amine group as a terminal functional group. However, most of the surface modification methods are performed under wet conditions, which require a relatively large amount of time, manpower and solvent. In order to save time and simplify complicated procedures, a dry coating machine was designed and used for amine group exchange. Comparing the XPS results, it was found that the results of NH₂-HNT prepared using a dry coating machine and the substitution through the wet method were not significantly different, and it has been confirmed that the amount of solvent used and the time savings can be made.

• KSBB Journal
• /
• 제26권1호
• /
• pp.49-56
• /
• 2011

Volatile components of crude fucoidan and its raw material, Undaria pinnatifida sporophylls were identified by GC/MSD analysis, and the effects of a combined method of solvent extraction and drying (hot-air drying or spray drying) on deordorization of fucoidans were examined. The major components of seaweed smell (odor) in crude fucoidan and Undaria pinnatifida sporophylls were identified as alkanes (octadecane, heptadecane, tetradecane) and acids (hexadecanoic acid, oleic acid). Solvent extraction and drying were combined for the deordorization of fucoidans: hot-air drying/deordorization process (HDDP) and spray drying/deordorization process (SDDP). The deordorization effects of solvent extraction using solvents including water, ethanol, and acetone were investigated. Among the tested solvents, ethanol was selected as a deordorization solvent, because the seaweed smell and taste were mostly lowered by ethanol extraction followed by drying. In addition, HDDP and SDDP were compared, showing that SDDP gave higher sensory characteristics than HDDP. When the crude fucoidan was treated by ethanol extraction for 30 min followed by SDDP, approximately 60% of off-flavor components of crude fucoidan was removed based on GC/MSD peak area, and the total sugar and sulfate contents and APTT-anticoagulant activity significantly increased compared to crude fucoidan. In conclusion, SDDP after ethanol treatment was proposed and established as a deordorization process for fucoidan preparation.

• 한국축산식품학회지
• /
• 제37권1호
• /
• pp.29-37
• /
• 2017

Defatted bovine liver (DBL) is a potential source of protein and minerals. Supercritical carbon dioxide ($SC-CO_2$) and a traditional organic solvent method were used to remove lipid from bovine liver, and the quality characteristics of a control bovine liver (CBL), bovine liver defatted by $SC-CO_2$ ($DBLSC-CO_2$) at different pressures, and bovine liver defatted by organic solvent (DBL-OS) were compared. The $DBLSC-CO_2$ samples had significantly higher (p<0.05) protein, amino acid, carbohydrate, and fiber contents than CBL and DBL-OS. There was a higher yield of lipid from CBL when using $SC-CO_2$ than the organic solvent method. SDS-PAGE analysis demonstrated that the CBL and $DBLSC-CO_2$ had protein bands of a similar intensity and area, whereas DBL-OS appeared extremely poor bands or no bands due to the degradation of proteins, particularly in the 50 to 75 kDa and 20 to 25 kDa molecular weight ranges. In addition, $DBLSC-CO_2$ was shown to have superior functional properties in terms of total soluble content, water and oil absorption, and foaming and emulsification properties. Therefore, $SC-CO_2$ treatment offers a nutritionally and environmentally friendly approach for the removal of lipid from high protein food sources. In addition, $SC-CO_2$ may be a better substitute of traditional organic solvent extraction for producing more stable and high quality foods with high-protein, fat-free, and low calorie contents.

• 멤브레인
• /
• 제14권2호
• /
• pp.126-131
• /
• 2004

균일한 밀집구조를 지니는 투명한 폴리설폰 필름이 용매를 사용한 표면처리를 통해 개질되었다. 개질은 고분자 필름을 디메털포름아마이드 용매에 1 sec간 담그고 이를 비용매 욕조에 침지시켜 이루어졌다. 개질 전 투명하였던 필름은 개질 후 횐색을 띠며, 많은 기공이 표면에 형성되었다. 비용매로서 물을 사용하였을 때가 이소프로파놀을 사용하였을 때 보다 표면의 불균일도가 증가하였다. 개질된 필름을 사용하여 방사성핵종으로 오염된 지역으로부터 오염물을 채취하였을 때 일반적으로 사용되는 필터페이퍼를 사용하는 것보다 우수한 채취 효율을 보여주었다. 개질된 필름 중에서는 비용매로 물을 사용한 경우 이소프로파놀을 이용한 필름보다 오염물의 채취 효과가 좋은 것으로 나타났다. 한편, 개질된 필름은 고분자 필름의 양쪽 겉표면만을 변화시켜, 필름의 내부는 고유한 밀집도를 유지함으로써, 필터페이퍼 또는 유리섬유를 사용한 오염물 제거 과정에서 나타날 수 있는 매체의 기공을 통한 2차적 오염을 방지하는 효과가 있다.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.59-68
• /
• 1985

종전 황산처리 정제방법에 의해 재상된 정제유의 난점인 동판부식이나 재생유만이 갖는 특유의 악취를 본연구를 통하여 해결하였다.

• KSBB Journal
• /
• 제25권4호
• /
• pp.371-378
• /
• 2010

For the biodiesel fuel production from microalgae, the lipid from wet and dry samples of green algae Scenedesmus sp. was extracted by using various solvents and pre-treatment methods. Extraction yield of the lyophilized sample was better than that of dry sample. Chloroform/methanol (2:1, v/v) and ultrasonication or homogenization method were also selected as the most effective solvent and pre-treatment methods for lipid extraction, respectively. Under these constraint conditions, optimization experiment of lipid extraction was investigated by Taguchi approach using orthogonal matrix $L_9$ ($3^4$) method. The optimum extraction conditions of lipid extraction was obtained at pre-treatment of homogenization, extraction time of 5 hour, temperature of $35^{\circ}C$, and solvent ratio of 1:20 (w/v). Yield of extraction at optimized condition was 20.55% and it was 96% of total lipid content (21.38%) of Scenedesmus sp.

• 생약학회지
• /
• 제46권3호
• /
• pp.229-233
• /
• 2015

The anti-nociceptive effect of an ethanol extract and its various solvent fractions from Curcuma longa Linne ethanol extract was studied using the writhing test in mice. Different fractions by various solvent extraction from Curcuma longa Linne ethanol extract were administered orally 1 hr or time-course (0.5, 1, 2 and 5 hr) before intraperitoneal injection of acetic acid. After treatment with 30% ethanol extract and n-butanol fraction, CB-1, at a dose of 250 mg/kg, the significant writhing responses were 87.5 ± 13.4 (inhibition rate 31%, p<0.01) and 75.1 ± 11.1 (inhibition rate 41%, p<0.01) lower than the control group. At the dose of CB-1 50 mg/kg and 250 mg/kg, CB-1 showed a similar activity comparing to diclofenac of 10 mg/kg. A time-course experiment was performed, which involved oral administration of CB-1 (250 mg/kg) at 0, 0.5, 1, 2, and 5 hr before acetic acid intraperitoneal injection. The most effective time of CB-1 was 30 min before treatment and persisting until 2 hr. This study showed that Curcuma longa Linne has anti-nociceptive properties comparable with those of diclofenac, which suggests promise for the treatment of intractable visceral pain in humans. Major components of the active fraction are identified as curcumin, cyclocurcumin and demethoxycurcumin.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1712-1713
• /
• 2011

Inkjet technology have many merits in plenty of industrial applications. However, deposited droplet has a very critical issue that is coffee ring effect, for the application to an industrial manufacturing process. To remove the coffee ring effect, the effect of thermal treatment conditions on shapes of inkjet printed silver patterns were investigated in various surface condition. The surface changes were characterized by the contact angle measurement. Droplets from a 50 ${\mu}m$ nozzle were printed on the substrate after optimizing the ejection of individual droplets. Ink with a high boiling point of main solvent results in coffee ring effect. This result implies that the dominant factor that determines the shape of droplet is the drying conditions of main solvent of silver nanoparticle colloidal ink. As a results, selecting a proper thermal treatment conditions is very crucial for better shapes of inkjet printed silver nanoparticle colloidal patterns.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.28-33
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on properties of TMP fibers and handsheets. DES was prepared by mixing of lactic acid and betaine (L and B), and the molar ratio of these two components mixtures was controlled to 2:1 (L:B=2:1) and 5:1 (L:B=5:1). As results, lignin was partly extracted from the TMP fibers. Especially, the delignification of TMP samples was promoted according to the increase of the molar ratio of lactic acid. Except for tear index, both tensile index and burst index of handsheets were increased when higher molar ratio of lactic acid was mixed for DES preparation. However, the LB DES treatment of TMP fibers didn't give any effect on the optical properties of TMP handsheets. The plausibility of TMP fiber was to be enhanced by LB DES treatment.