• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.740-746
• /
• 2009

In the present study, the drowning-out crystallization of L(+)-calcium lactate was investigated in order to develop the crystallization separation process. The crystallization of the calcium lactate was induced by injecting the alcoholic anti-solvent into the aqueous solution of calcium lactate and the control of the calcium lactate crystal size during the crystallization was primarily investigated under the consideration of the anti-solvent species, anti-solvent composition and agitation speed as the key operating factors. Alcohols of methanol, ethanol, n-propanol and i-propanol were used as the anti-solvent for the drowning-out crystallization. Prior to the crystallization experiment, the solubility of calcium lactate in the water-alcohol mixture was measured along with the variation of the alcohol species and composition, which was necessary to estimate the supersaturation level of the crystallization. By the drowning-out crystallization, the calcium lactate crystals of the fabric shape were obtained. Using the ethanol as the antisolvent, the fabric crystals close to the needle shape were produced. However, the hairy crystals were obtained by using the propanol as the anti-solvent. Due to such morphological features, the crystals was highly apt to form the aggregates. The aggregation of the crystals was intensified as increasing the alcohol fraction in the water-alcohol mixture. Meanwhile, the agitation caused the breakage of crystals, resulting in the decrease of the crystal size. Therefore, the crystal size in the crystallization was predominantly determined by the competition between the crystal aggregation and breakage.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1579-1585
• /
• 2016

Sugar esters are valuable compounds composed of various sugars and fatty acids that can be used as antibacterial agents and emulsifiers in toothpaste and canned foods. For example, fructose fatty acid esters suppress growth of Streptococcus mutans, a typical pathogenic bacterium causing dental caries. In this study, fructose laurate ester was chosen as a target material and was synthesized by a transesterification reaction using Candida antarctica lipase B. We performed a solvent screening experiment and found that a t-butanol/dimethyl sulfoxide mixture was the best solvent to dissolve fructose and methyl laurate. Fructose laurate was synthesized by transesterification of fructose (100 mM) with methyl laurate (30 mM) in t-butanol containing 20% dimethyl sulfoxide. The conversion yield was about 90%, which was calculated based on the quantity of methyl laurate using high-performance liquid chromatography. Fructose monolaurate (M_r 361) was detected in the reaction mixture by high-resolution mass spectrometry. The inhibitory effect of fructose laurate on growth of oral or food spoilage microorganisms, including S. mutans, Bacillus coagulans, and Geobacillus stearothermophilus, was evaluated.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.86-89
• /
• 2004

One most feasible way to measure the concentration field in the micro-channel is using micro-LIF(Laser Induced Fluorescence) method. However, an accurate concentration field at a given cross plane in a micro-channel has not been successfully achieved so far due to various limitations in the light illumination and fluorescence signal detection. The present study demonstrates a novel method to provide an ultra thin laser sheet beam having five(5) microns thickness by use of a micro focus laser line generator. The laser sheet beam illuminates an exact plane of concentration measurement field to increase the signal to noise ratio and considerably reduce the depth uncertainty. Nile Blue A was used as fluorescent dye for the present LIF measurement. The enhancement of the fluorescent intensity signals was performed by a solvent mixture of water $(95\%)$ and ethanol (EtOH)/methanol (MeOH) $(5\%)$ mixture. To reduce the rms errors resulted from the CCD electronic noise and other sources, an expansion of grid size was attempted from $1\times1$ to 3(3 or 5(5 pixel data windows and the pertinent signal-to-noise level has been noticeably increased accordingly.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.466-470
• /
• 2014

In this paper, organic solvent electrolytes were prepared by a mixture of propylene carbonate (PC), dimethyl carbonate (DMC), tetraethylammonium tetrafluoroborate ($TEABF_4$)s to evaluate the ionic properties of propylene carbonate (PC)/dimethyl carbonate (DMC) mixtures as solvents for a capacitor application, in view of improving the electrochemical performances. The bulk resistance and interfacial resistance of the mixture electrolytes were investigated using an AC impedance method. The morphology of carbon-based electrodes which were contained in different electrolytes was analyzed by scanning electron microscopy (SEM) method. From the experimental results, by increasing the FEC content, capacitance of electrodes was increased, and the interfacial resistance was decreased. In particular, by a content of 2 vol % FEC in 0.2 M $TEABF_4$ PC/DMC solvent, the electrolyte showed the superior capacitance. However, when FEC content exceeds 2 vol %, the capacitance was decreased and the interfacial resistance was increased.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.60-65
• /
• 2019

Since nanofluids (NFs), which are a mixture of a small amount of nanoparticles and a bulk liquid solvent, were first proposed by Stephen Choi at the Argonne National Lab in 1995, they have been considered for use in many technical studies of power cooling systems and their practical application due to their high thermal conductivity and heat transfer coefficients compared to conventional coolants. Although nanofluids are a well-known form of engineering fluid that show great promise for use in future cooling systems, their underlying physics as demonstrated in experiments remain unclear. One proven method of determining the heat transfer performance of nanofluids is measuring the concentration of nanoparticles in a mixture. However, it is experimentally inefficient to build testbeds to systematically observe particle distributions on a nanoscale. In this paper, we demonstrate the distribution of nanoparticles under a temperature gradient in a solution using molecular dynamics simulations. First, temperature profiles based on substrate temperature are introduced. Following this, the radial pair distribution functions of pairs of nanoparticles, solvents, and substrates are calculated. Finally, the distribution of nanoparticles in different heating regions is determined.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.72-79
• /
• 2001

The selective catalytic oxidation of toxic aromatic solvents (benzene, toluene, ethylbenzene, and styrene) and their mixtures were studied on a $Pt/{\;}{\gamma}-Al_2O_3$ catalyst at temperature ranging from $160~350^{\circ}C$. The deep conversion of aromatic solvents was increased as the inlet concentration was decreased and the reaction temperature was increased. The reactivity increases in order benzene > toluene > ethylbenzene > styrene. In mixture, remarkable effects on reaction rate and selectivity have been evidence ; the strongest inhibition effect is shown by styrene and increase in a reverse order with respect to that of reactivity. The inhibition effect was increased in order styrene > ethylbenzene > toluzene > benzene. This trend is due to the competition adsorption between the two or three reactants on the oxidized catalyst. Also, the deep conversion change of benzene was a small in tertiary mixtures(including of benzene and styrene) comparing with conversion characteristics of binary mixture with styrene. This result was due to small concentration of styrene. which had very strong inhibition effect.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.116-124
• /
• 2006

Cloud-point data to $160^{\circ}C$ and 1,000 bar are presented with poly(ethylene-co-15.3 mole% octene) copolymers ($PEO_{15}$) in pure 1-octene and mixtures of ethylene - 1-octene. The cloud-point curves for $PEO_{15}$ - ethylene - 1-octene mixture dramatically increase in pressure to as high as 1,000 bar with an increasing ethylene concentration. At ethylene concentrations less than 18 wt%, the ternary mixture has bubble- and cloud-point curves. As the ethylene concentration of the ternary mixture increases, the bubble-point curve and the single-phase region reduce. The reduction in the single phase region with increasing ethylene concentrations is the result of reduced dispersion interactions between $PEO_{15}$ and the mixed solvent. The single-phase region decreases with increasing temperatures when ethylene concentrations are lower than 36 wt%, whereas the single-phase region increases with temperatures at ethylene concentrations greater than 50 wt%. At ethylene concentrations greater than 50 wt% the effect of the polar interactions of the mixed solvent, which is unfavorable to dissolve PEO, is greater than the effect of the density of the mixed solvent. Therefore, the cloud-point pressures increase with a decreasing temperature. However, at ethylene concentrations less than 50 wt%, the cloud-point pressures decrease with temperature, because the effect of the polar interactions is less than the density effect.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.718-724
• /
• 2006

The heterogeneous association behaviour of various concentration binary mixtures of mono alkyl ethers of ethylene glycol with ethyl alcohol were investigated by dielectric measurement in benzene solutions over the entire concentration range at 25 ${^{\circ}C}$. The values of static dielectric constant $\epsilon_0$ of the mixtures were measured at 1 MHz using a four terminal dielectric liquid test fixture and precision LCR meter. The high frequency limiting dielectric constant $\epsilon_\infty$ values were determined by measurement of refractive index $n_D$ ($\epsilon_\infty\;=\;n_D\;^2$). The measured values of $\epsilon_0$ and $\epsilon_\infty$ were used to evaluate the values of excess dielectric constant $\epsilon^E$, effective Kirkwood correlation factor $g^{eff}$ and corrective correlation factor $g_f$ of the binary polar mixtures to obtain qualitative and quantitative information about the H-bond complex formation. The non-linear behaviour of the observed $\epsilon_0$ values of the polar molecules and their mixtures in benzene solvent confirms the variation in the associated structures with change in polar mixture constituents concentration and also by dilution in non-polar solvents. Appearance of the maximum in $\epsilon^E$ values at different concentration of the polar mixtures suggest the formation of stable adduct complex, which depends on the molecular size of the mono alkyl ethers of ethylene glycol. Further, the observed $\epsilon^E$ < 0 also confirms the heterogeneous H-bond complex formation reduces the effective number of dipoles in these polar binary mixtures. In benzene solutions these polar molecules shows the maximum reduce in effective number of dipoles at 50 percent dilutions. But ethyl alcohol rich binary polar mixtures in benzene solvent show the maximum reduce in effective number of dipoles in benzene rich solutions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.27-36
• /
• 1973

The effect of water activity on degradation of pigments in dried lavers, Porphyra tenera Kjellm. was examined when stored at room temperature for fifty days. Chlorophyll pigment was extracted with methanol-petroleum ether mixture solvent(2:1 v/v), partitioned in ether, and analysed spectrophotometrically at 662 nm as chlorophyll a. The degradation products of chlorophyll were isolated on sugar-starch column(85:15 w/w) with n-propanol-petroleum ether solution(1:200 v/v) as a developing solvent. The isolated green colored zones were analysed individually at the wavelengths of 650, 662, and 667 nm as allomerized product, chlorophyll a retained, and pheophytin formed respectively. Carotenoida were also extracted with the methanol mixture solvent, partitioned in ether, and finally redissolved in acetone after the evaporation of ether in a rotary vacuum evaporator. The total carotenoid content was measured as lutein at 450 nm. From the results, it is noted that the rate of chlorophyll degradation reached a minimum at 0.11 to 0.33 water activity while progressively increased at higher moisture levels resulting in rapid conversion of chlorophyll to pheophytin. At lower activity, autocatalysed oxidizing reaction like allomerization seemed prevailing the acid catalysed conversion reaction. The loss of carotenoid pigment was also greatly reduced at the range of 0.22 to 0.34 water activity with much faster oxidative degradation at both higher and extremely lower moisture levels. These two moisture levels indicated above at which the both pigments exhibited maximum stability are considerably higher than the BET monolayer moisture which appeared 7.91 percent on dry basis at Aw=0.10 calculated from the adsorption isothermal data of the sample at $20^{\circ}C$. The rate of pigment loss in heat treated samples at 60 and $100^{\circ}C$ for 2 hours prior to storage somewhat decreased, particularly at higher moisture levels although the final pigment retention was not much stabilized.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.29-34
• /
• 2013

Solvent extraction experiments were performed to separate platinum and rhodium from mixed chloride solution by using tri 2-ethylhexyl amine (TEHA) and its mixture with TBP and LIX 63. Effects of extraction conditions on the separation of the two metals were investigated as a function of extractant concentration in the HCl concentration range from 1 to 9 M. The concentration of Pt (IV) and Rh(III) was controlled to $1{\times}10^{-3}M$ and $2{\times}10^{-4}M$, respectively. In the extraction with TEHA and its mixture, Pt was quantitatively extracted irrespective of HCl concentration, while the extraction percentage of Rh depended on the extraction condition. When the concentration of HCl in the mixed solution was low, the extraction of Rh was nil and separation of Pt and Rh was possible. Adding TBP to TEHA had little effect on the extraction of both metals, while adding LIX63 to TEHA favored the extraction of Rh.