• KSBB Journal
• /
• 제26권1호
• /
• pp.49-56
• /
• 2011

Volatile components of crude fucoidan and its raw material, Undaria pinnatifida sporophylls were identified by GC/MSD analysis, and the effects of a combined method of solvent extraction and drying (hot-air drying or spray drying) on deordorization of fucoidans were examined. The major components of seaweed smell (odor) in crude fucoidan and Undaria pinnatifida sporophylls were identified as alkanes (octadecane, heptadecane, tetradecane) and acids (hexadecanoic acid, oleic acid). Solvent extraction and drying were combined for the deordorization of fucoidans: hot-air drying/deordorization process (HDDP) and spray drying/deordorization process (SDDP). The deordorization effects of solvent extraction using solvents including water, ethanol, and acetone were investigated. Among the tested solvents, ethanol was selected as a deordorization solvent, because the seaweed smell and taste were mostly lowered by ethanol extraction followed by drying. In addition, HDDP and SDDP were compared, showing that SDDP gave higher sensory characteristics than HDDP. When the crude fucoidan was treated by ethanol extraction for 30 min followed by SDDP, approximately 60% of off-flavor components of crude fucoidan was removed based on GC/MSD peak area, and the total sugar and sulfate contents and APTT-anticoagulant activity significantly increased compared to crude fucoidan. In conclusion, SDDP after ethanol treatment was proposed and established as a deordorization process for fucoidan preparation.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.431-437
• /
• 2008

The solvent effects on the relative free energies of binding of K+ and Na+ ions to 12-crown-4 and Dlog Ks (the difference of stability constant of binding) have been investigated by a Monte Carlo simulation of statistical perturbation theory (SPT) in several solvents. Comparing the relative free energies of binding of K+ and Na+ ions to 12-crown-4, in CH3OH of this study with experimental works, there is a good agreement among the studies. We have reported here the quantitative solvent-polarity relationships (QSPR) studied on the solvent effects the relative free energies of binding of K+ and Na+ ions to 12-crown-4. We noted that DN(donor number) dominates the differences in relative solvation Gibbs free energies of K+ and Na+ ions and DN dominates the negative values in differences in the stability constant (Dlog Ks) as well as the relative free energies of binding of K+ and Na+ ions to 12-crown-4 and p* (Kamlet-Tafts solvatochromic parameters) dominates the positive values in differences in the stability constant (Dlog Ks) as well as the relative free energies of binding of K+ and Na+ ions to 12-crown-4.

• ETRI Journal
• /
• 제33권6호
• /
• pp.887-896
• /
• 2011

We investigated the effects of a gate dielectric and its solvent on the characteristics of top-gated organic field-effect transistors (OFETs). Despite the rough top surface of the inkjet-printed active features, the charge transport in an OFET is still favorable, with no significant degradation in performance. Moreover, the characteristics of the OFETs showed a strong dependency on the gate dielectrics used and its orthogonal solvents. Poly(3-hexylthiophene) OFETs with a poly(methyl methacrylate) dielectric showed typical p-type OFET characteristics. The selection of gate dielectric and solvent is very important to achieve high-performance organic electronic circuits.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.224-230
• /
• 2008

This study examined the photoemission behaviors of isolated chains of poly[2-methoxy, 5-(2'-ethylhexyloxy)-1,4-phenylenevinylene](MEH-PPV) dispersed in various solvents including dichloromethane, chloroform and tetrahydrofuran(THF). A change in polymer-solvent interactions in these solutions caused the MEH-PPV chains to adopt different local conformations, which in turn affected their radiative de-excitation pathways. For the polymer in dichloromethane and chloroform, in which the conjugated chains are relatively extended, photoemission occurs mostly at the long chromophores with lowest HOMO-LUMO energy gap. Their emission spectra showed a main peak at ${\sim}560\;nm$. Dual photoemission of high- and low-energy chromophores was observed when the conjugated chains were forced to partially collapse in a poor solvent THF. Novel high-energy peaks and a typical low-energy peak were detected at ${\sim}414\;nm$ and ${\sim}554\;nm$, respectively. The observation of the high-energy peaks indicates significant suppression of the intrachain energy transfer process, which was attributed to the increase in conformational disorder in the partially collapsed coils. An analysis of the excitation spectra suggests that the high-energy peaks belong to short chromophores constituting of one or two repeat units. This study systematically investigated the effects of polymer concentration, temperature and single bond defects along the backbone on the photoemission of the high-energy chromophores.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.411-416
• /
• 2016

Benzothienobenzothiophene ($C_8-BTBT$) is a soluble organic small molecule material with high crystallinity resulting from its strong self-organizing properties. In addition, the high mobility and easy fabrication of $C_8-BTBT$ make it very attractive in terms of organic thin-film transistors. In this work, we made $C_8-BTBT$ thin films by using the zone-casting method; we also used an organic solvent to treat the devices with solvent vapor annealing to improve the electrical properties. As a result, we confirmed improved mobility, threshold voltage, and subthreshold swing after solvent vapor annealing. To prove the effect of solvent vapor annealing, we used the simultaneous extraction model to extract the contact resistance from the current-voltage curve. We confirmed that the electrical properties improved with decreasing contact resistance.

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.16-19
• /
• 2001

For the fast dry of the aqueous tape, the process which water was reaplaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more, The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.533-537
• /
• 2006

The effects of binary solvent mixtures with various ratios of toluene and ethanol on the properties of slurries and green sheets were investigated. Viscosity of slurry was changed by varying the ratio of solvent mixture which affected the solubility of binder. The relative solvency behavior of a solvent mixture could be predicted with the Hildebrand solubility parameter(${\delta}$) and hydrogen bonding index( ${\gamma}$). The minimum viscosity, the best dispersion of binder, was reached at the composition of toluene:ethanol=4:6, which corresponded to our forecast. The mechanical properties of green sheets related to evaporation of solvents were influenced by the composition of the solvent mixture. At the azeotrope the skin was formed on a drying cast during the drying process because of fast evaporation. At a range of concentrations over 50wt% toluene, green sheets could not be fully dried at low temperature due to excessive toluene. The mechanical properties of green sheets were excellent at the azeotrope-like composition of toluene:ethanol=4:6 which has a little excess of toluene over the azeotrope.

• Journal of Microbiology and Biotechnology
• /
• 제20권5호
• /
• pp.881-888
• /
• 2010

solvent-tolerant bacterium strain, MH6, was isolated by hydrophilic organic solvent DMSO enrichment in the medium and identified as Serratia marcescens. The extracellular protease with novel organic-solvent-stable properties from strain MH6 was purified and characterized. The molecular mass of the purified protease was estimated to be 52 kDa on SDS-PAGE. The open reading frame (ORF) of the MH6 protease encoded 504 amino acids with 471 amino acid residues in the mature protease. Based on the inhibitory effects of EDTA and 1,10-phenathroline, the MH6 protease was characterized as a metalloproteinase. The enzyme activity was increased in the presence of $Ni^{2+}$, $Mg^{2+}$, and $Ca^{2+}$. The protease could also be activated by the nonionic surfactants Tween 80 (1.0%) and Triton X-100 (1.0%). The protease showed remarkable solvent stability in the presence of 50% (v/v) solutions of long-chain alkanes and long-chain alcohols. It was also fairly stable in the presence of 25% solutions of hydrophilic organic solvents. Owing to its high stability in solvents and surfactants, the MH6 protease is an ideal candidate for applications in organic catalysis and other related fields.

• 식품보건융합연구
• /
• 제5권5호
• /
• pp.11-25
• /
• 2019

Extraction of oil from Moringa oleifera seed using Response Surface Methodology (RSM) was investigated. Effects of three factors namely: sample mass, particle size and extraction time on the response, Moringa oleifera a volume extracted, were determined. The Box-Behnken design of RSM was employed which resulted in 15 experimental runs. Extraction was carried out in a 250 ml Soxhlet extractor with Hexane and Ethanol as solvent. The Moringa oleifera seed powder was packed inside a muslin cloth placed in a thimble of the Soxhlet extractor. The extraction was carried out at 60℃ using thermostatic heating mantle. The solvent in the extracted oil was evaporated and the resulting oil further dried to constant weight in the oven. This study demonstrates that Moringa oleifera oil can be extracted from its seed using ethanol and acetone as extraction solvent. The optimum process variables for both solvent (ethanol and acetone) was determined at sample weight of 40 g, particle size of 325 ㎛ and extraction time of 8 hours. It can be deduced that using acetone as solvent produces a higher yield of oil at the same optimum variable conditions compared to when ethanol was used.

• Journal of Applied Biological Chemistry
• /
• 제55권1호
• /
• pp.35-39
• /
• 2012

선학초 열수 추출물과 에탄올 추출물의 분획물을 항산화 및 주름개선의 소재로 이용하기 위하여 생리활성을 검증하였다. 항산화효과를 확인하기 위하여 전자공여능을 측정한 결과 선학초 열수추출물(AW)과 에탄올추출물(AE) 모두 ethyl acetate층 1,000 ppm에서 각각 96.2, 92.3%의 효과를 나타내었고, SOD 유사활성능을 측정한 결과 AW의 ethyl acetate층에서 61.8%의 활성을 AE의 $n$-butyl alcohol 층에서 58.0%의 높은 활성을 각각 나타내었다. 또한 xanthine oxidase저해활성을 측정한 결과 AW와 AE에서 모두 ethyl acetate층 1,000 ppm일 때, 각각 84.9, 92.5%의 가장 높은 저해율을 나타내었다. 주름개선 효능 확인을 위해 elastase 저해활성을 측정한 결과 이 또한 AW와 AE 모두에서 ethyl acetate층이 각각 55.2, 70.1%의 효능을 나타내었으며, collagenase 저해활성을 측정한 결과 AW의 ethyl acetate층이 90.6%로 가장 높은 저해율을, AE는 88.6%로 $n$-butyl alcohol 층이 가장 높은 저해율을 나타내었다. 이상의 결과로 미루어 보아 선학초의 열수 추출물과 에탄올 추출물의 분획물이 in vitro상에서 항산화 및 주름개선의 활성이 있음을 확인할 수 있었다.