• Asian-Australasian Journal of Animal Sciences
• /
• 제11권6호
• /
• pp.708-712
• /
• 1998

One hundred and eighty, 1-day old broiler chicks, randomly divided into 15 replicates of 10 brids each were employed to six treatment rations (A, B, C, D, E and F). Rapeseed meal (RSM) with or without treatment was incorporated in the rations at 20 percent level in lieu of soybean meal. The birds in group A were fed soybean based ration and those in group B, C, D, E and F were given ration containing untreated, solvent extracted, water treated, autoclaved and ferrous sulphate treated RSM, respectively. Presence of RSM in the rations whether untreated or treated, significantly reduced weight gain and feed consumption of the birds compared with those of control group but efficiency of feed utilization, dressed weight, dressing percentage and weights of internal organs amongst the groups remained unaffected. The size of thyroid galnds of the broilers using the meal was significantly larger than those having ration without RSM. The only exception was that the birds having solvent extracted meal had similar thyroid gland relative weight as those of control group indicating reduced antinutritional effect of isothiocyanates content due to solvent extraction of the meal.

• 공업화학
• /
• 제3권4호
• /
• pp.588-594
• /
• 1992

Potassium octoate 촉매 존재하에 toluene diisocyanate(TDI)를 사용하여 polyisocyanurate를 합성할 때 용매에 포함된 수분과 부탄올이 반응물의 점도 변화율, 반응시간(생성물의 점도가 5 poise가 될 때까지의 반응시간), 생성물의 분자량 분포 및 TDI전환율에 미치는 영향을 고찰하였다. Butyl acetate용매에 포함된 수분의 양이 0.1%인 반응 조건에서 uretidione이 생성되었으며 이때 가장 높은 TDI전환율이 얻어졌다. Uretidione은 butanol을 용매에 첨가할 때는 생성되지 않았다. 첨가된 butanol양이 증가할수록 TDI전환율은 증가하고 분자량 분포도 넓어졌다.

• 대한화학회지
• /
• 제33권5호
• /
• pp.538-544
• /
• 1989

1-(phenoxymethyl)benzotriazole(1)과 1-(thiophenoxymethyl)benzotriazole(2) 유도체중의 X 치환기가 전자를 끄는 세기(${\rho}<0$)와 methylene group의 인접 Y원자에 의한 local diamagnetic effect(Y=O(1)>S(2)), 그리고 용매의 극성파라미터($E_T$=Kcal/mol:acetone;42.2>chloroform;39.0)가 클수록 methylene group의 수소원자($H_m$)와 용매사이에 B-형의 수소결합성이 증가되었으며 (1)의 methylene group 에 대한 substituent chemical shift($CH_2-SCS$)에 미치는 자유 에너지 직선관계(LFER)의 조성은 아세톤 용액 중에서 장(F)(또는 유발(I))-효과 보다 공명(R)-효과가 더 크게 나타나는 용매 의존적인 경향이었다.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.656-661
• /
• 2007

The effects of a neutral solvent of dioctyl phthalate (DOP) on the phase behavior of symmetric polystyrene-block-poly(n-butyl methacrylate) copolymers (PS-b-PnBMA) were assessed herein. Closed-loop phase behavior with a lower disorder-to-order transition (LDOT) and an upper order-to-disorder transition (UODT) was observed for PS-b-PnBMA/DOP solution when the quantity of DOP was carefully controlled. When the molecular weight of PS-b-PnBMA became larger, the LDOT did not appreciably change at smaller quantities of DOP. With larger quantities of DOP, the reduction in the UODT is greater than the increase in the LDOT. This behavior is discussed in accordance with a molecular theory predicated on a compressible random-phase approximation.

• Korean Chemical Engineering Research
• /
• 제53권4호
• /
• pp.445-449
• /
• 2015

본 연구에서는 초임계 이산화탄소를 용매로 사용하여 고삼으로부터 genistein을 추출하였다. 공용매와 추출 온도 및 압력 등에 따른 추출효율을 측정하였으며, 공용매로 메탄올과 에탄올을 사용하여 200 bar에서 300 bar의 압력범위와 $35^{\circ}C$와 $50^{\circ}C$의 온도범위에서 연구를 수행하였다. 조건에 따라 서로 다른 genistein의 추출효율을 보였으며, 특히 높은 압력과 높은 온도에서 가장 높은 추출효율이 관찰되었다. 또한 메탄올이 에탄올보다 더욱 효과적인 공용매 특성을 보였으며 농도가 높을수록 추출효율도 증가하였다. DPPH 라디칼 소거 활성을 측정하여 고삼 추출물의 항산화 활성을 비교하였다.

• 대한화학회지
• /
• 제37권3호
• /
• pp.335-343
• /
• 1993

나프탈렌, ${\alpha}$- 또는 ${\beta}$-메틸 나프탈렌 그리고 1,2- 1,3- 또는 2,6-디메틸나프탈렌과 클로라닐의 전하이동 착물의 흡수 극대 파장은 염화에틸렌, 염화메틸렌, 클로로포름 용매에서 그리고 10, 15, 20, 25$^{\circ}C$ 온도에서 자외선 분광광도법으로 측정하였다. 이 전하이동착물은 1:1 분자비로 결합하였으며 흡수극대 파장은 용매의 극성과 온도에 따라 변하였고, 형성상수(K$_f$)는 용매의 극성 그리고 온도가 증가함에 감소하였다. 이와같이 온도 및 용매가 형성상수에 미치는 효과를 열역학적 고찰로써 논의하였으며, 또한 전자주개들의 전자 및 입체 효과가 형성상수에 미치는 영향도 논의하였다.

• Macromolecular Research
• /
• 제8권2호
• /
• pp.80-88
• /
• 2000

Biodegradable microspheres were prepared with poly(L-lactide-co-glycolide) (PLGA, 75 : 25 by mole ratio) by an oil/oil solvent evaporation method for the sustained release of anti-AIDS virus agent, AZT The microspheres of relatively narrow size distribution (7.6$\pm$ 3.8 ㎛) were obtained by controlling the fabrication conditions. The shape of microspheres prepared was smooth and spherical. The efficiency of AZT loading into the PLGA microsphere was over 93% compared to that below 15% for microspheres by a conventional water/oil/water method. The effects of Preparation conditions on the morphology and in vitro AZT release pattern were investigated. in vitro release studies showed that different release pattern and release rates could be achieved by simply modifying factors in the fabrication conditions such as the type and amount of surfactant, initial amount of loaded drug, the temperature of solvent evaporation, and so on. PLCA microspheres prepared by 5% of initial drug loading, 1.0% (w/w) of surfactant concentration, and 25$\^{C}$ of solvent evaporation temperature were free from initial burst effect and a near-zero order sustained release was observed. Possible mechanisms of the near-zero order sustained release for our system have been proposed.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.512-518
• /
• 2005

Polymeric fibers with nanometer-scale diameters are produced by electrospinning. When the electrical forces at the surface of a polymer solution or melt overcome the surface tension then electrospinning occurs. Polycarbonate has been electrospun. Electrospun fibers are observed by scanning electron microscopy and transmission electron microscopy. The surface morphology of e-spun fiber has been studied by many variables that are involved in different polymer concentrations, solvent mixing ratios and ambient parameters. The average diameters of the electrospun fibers range from 200 nm to 4,570 nm when the PC concentration is decreasing from 15.5\;wt{\%}\;to\;25\;wt{\%}.$ The higher concentration of the polymer solution makes the fibers thicker due to preventing the fiber stretching. With respect evaporation effects, the solvent mixing ratios cause significant changes of the fiber size distribution. As a matter of fact the fiber diameter steadily increases with increasing amount of DMF until the solvent mixture is at THF:DMF ratio of 60:40.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.146-153
• /
• 2003

This article describes the metal ions adsorption of chitosan fibers. The chitosan fibers were manufactured by wet spinning using 2% acetic acid as solvent, 10% aqueous sodium hydroxide as non solvent, and 4%chitosan solution as a solvent. The adsorption characteristics of chitosan fibers towards 100ppm solutions of various metal ions such as Cu(II), Cd(II), Cr(III), Hg(II) were examined at different pH value by ICP-Atomic Emission Spectrometer. The adhesiveness of metallic ions to the chitosan fiber were increased with the increase of pH and the decrease of denier. On the other hand, from pH4, chitosan fiber that is immersed in metal ion aqueous solution of Cu(II) and Cd(II) became homogeneous solution because is dissolved. The adhesiveness of metallic ions to chitosan fiber were found to increased in a sequence of Hg(II)> Cr(III)> Cu(II)> Cd(II). The antimicrobial characteristics of the chitosan fiber by adhered metal ions, virgin chitosan fiber, and cotton fiber were evaluated. The antimicrobial activity of the fibers were increased with the decrease of denier.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.246-251
• /
• 2019

A solvent free, highly concentrated silica-acryl monomer hybrid sol was synthesized using aqueous colloidal silica as a precursor. The effects of the silica particle size, type of surface treatment agent employed, and silica content on the formation of the hybrid sol were systematically studied. The optical and physical properties of the coating solution prepared using the hybrid sol were also characterized. The viscosity of the hybrid sol tended to decrease as the particle size of the silica and the molecular weight of the surface treatment agent increased. The PET substrate coated with MPTMS-Mix (mixture, 70 wt%) solution showed the highest surface hardness (6 H) and low surface roughness ($Ra=0.044{\mu}m$), which could be attributed to an increase in packing density caused by the infiltration of small particles into the pores formed between larger particles.