• 한국콘텐츠학회논문지
• /
• 제10권8호
• /
• pp.104-110
• /
• 2010

생명과학 분야에서 컴퓨터를 활용할 수 있는 대표적인 예로는 서열화, 서열화 분석, 비교, 진화, 돌연변이 추적, 약 설계를 위한 유사성 비교, 단백질 기능 예측, 그리고 세포 메커니즘과 질병 발생에서의 유전자 역할 예측 등 다양한 분야를 들 수 있다. 생명공학 연구자들에게는 이와 같은 작업을 위한 도구들이 요구되고 있다. 본 논문에서는 바이오 데이터 분석을 위한 기존 시스템의 문제점을 파악하고, 이를 개선할 수 있는 시스템 설계에 초점을 맞추었다. 또한 각각의 분석 작업을 개선할 수 있고 서로 독립적으로 진행되는 기존의 시스템을 통합할 수 있는 통합 분석 시스템을 설계하고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권3호
• /
• pp.416-420
• /
• 2002

Various products of karanj (Pongamia glabra) are utilized for industrial, health and animal agriculture applications in the Indian subcontinent. Despite a rich source of protein (CP, 28-34%), karanj cake was found to be slightly bitter in taste and toxic owing to the presence of flavonoid (Karanjin), restricting its safe inclusion in the livestock diets. Feeding trials with raw cake revealed its poor palatability and adverse performance among different categories of livestock including poultry. The present study was, therefore, aimed to detoxify karanj cake by various physico-chemical methods like solvent extraction, water washing, pressure cooking and alkali and acid treatments. The level of residual karanjin in raw and variously processed cake was quantified using high performance liquid chromatography (HPLC). The raw expeller karanj cake was found to contain about 0.19% of karanjin. Though a non-polar solvent, soxhlet extraction of expeller pressed cake with petroleum ether drastically reduced karanjin content (0.01%). Soaking of cake for 24 h in 1% NaOH (w/w) solution was found to reduce karanjin to a major extent with little further benefit by increasing alkali level. Milder alkalies like lime and fertilizer grade urea reduced the karanjin levels marginally. Similar was the case with mineral acids such as HCl and glacial acetic acid. It was, therefore, concluded that solvent extraction of karanj seeds would be the best method of detoxification as well as for more recovery of oil and karanjin.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.26.3-26.3
• /
• 2008

This research develops a GPS-based formation-flying testbed (FFTB) for formation navigation and control. The FFTB is a simulator in which spacecraft simulation and modeling software and loop test capabilities are integrated for test and evaluation of spacecraft navigation and formation control technologies. The FFTB is composed of a GPS measurement simulation computer, flight computer, environmental computer for providing true environment data and 3D visualization computer. The testbed can be simulated with one to two spacecraft, thus enabling a variety of navigation and control algorithms to be evaluated. In a formation flying simulation, GPS measurement are generated by a GPS measurement simulator to produce pseudorange, carrier phase measurements, which are collected and exchanged by the flight processors and subsequently processed in a navigation filter to generate relative and/or absolute state estimates. These state estimates are the fed into control algorithm, which are used to generate maneuvers required to maintain the formation. In this manner, the flight processor also serves as a test platform for candidate formation control algorithm. Such maneuvers are fed back through the controller and applied to the modeled truth trajectories to close simulation loop. Currently, The FFTB has a closed-loop capability of simulating a satellite navigation solution using software based GPS measurement, we move forward to improve using SPIRENT GPS RF signal simulator and space-based GPS receiver

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.426-429
• /
• 2007

CrossRef에서는 DOI 식별자를 기반으로 출판사 간 참고문헌을 링크하기 위한 참조링킹 인프라를 제공하고 있으며, CrossRef과 연계한 참고문헌의 전자원문 링크 서비스인 참조링킹 체제를 구축하는 기관이 점차 늘고 있다. 본 연구에서는 참조링킹 체제를 효율적으로 구축하기 위해 Citation Matcher를 개발하였다. Citation Matcher는 과거 수작업에 의존하던 참고문헌 DB구축 및 식별자 매칭 프로세스를 자동화하고 패턴화한 것으로, 참고문헌을 원형 그대로 Copy & Paste하면, 참고문헌의 패턴을 분석하여 참고문헌으로부터 저널명, 저자, 권/호 등 Citation 정보를 일목요연하게 파싱하고, 파싱한 정보를 표준화된 방식으로 CrossRef, Pubmed, yesKISTI 등의 메타데이터와 매칭하여 식별자를 획득하여 링크하는 솔루션이다. Citation Matcher는 과거 사람이 수행하던 국내 학술논문의 참고문헌 구축 및 매칭 프로세스를 완전 자동화함으로써 업무 프로세스를 혁신하고, 정보자원 간 연계성 제고 및 논문 간 Seamless한 접근을 통해 이용 편리성을 제고하기 위한 것이다.

• Journal of Astronomy and Space Sciences
• /
• 제25권3호
• /
• pp.291-298
• /
• 2008

민간과 상업응용분야의 성장과 함께 위치정보, 항법 그리고 시각정보를 제공하는 전지구 위성 항법시스템(GNSS)은 우리의 삶에 많은 영향을 주고 있다. 사용자들의 요구사항을 맞추기 위해 10cm급의 정확도를 갖는 새로운 측위기술이 적용되고 있으며, 측위정확도는 더욱 향상 되어가고 있다. 이 연구에서는 GPS L1 수신기 사용자의 측위정확도 향상을 위해 두개의 GPS 기준국 (DAEJ, SUWN) 관측정보를 이용하였고, 한반도내 넓은 범위의 실험지역으로부터 얻어진 데이터를 자료처리 하였다. 결과적으로 이중 GPS 기준국에 의해 산출된 조합해가 단일 기준국에 의한 결과보다 향상된 위치정확도를 보였다.

• 한국통신학회논문지
• /
• 제28권9A호
• /
• pp.663-668
• /
• 2003

고속 네트워킹 기술 발전과 더불어 대용량의 데이터 처리는 컴퓨터의 CPU 사이클을 많이 소모하므로 컴퓨터의 성능을 저하시킨다. 따라서 고속의 네트워크 환경에서 컴퓨터 성능을 향상시키기 위해서는 데이터 처리로 소모되는 컴퓨터의 CPU 사이클을 최대한 억제해야 한다. 이러한 방법 중의 하나가 점보그램과 점보프레임 같은 패킷 길이가 긴 점보패킷을 사용하는 것이다. 그러나 점보패킷이 전달 지연에 민감한 VoIP 패킷들과 동시에 처리되는 경우 이 들 서비스에 질적인 저하를 가져올 수 있다. 뿐만 아니라, 심각한 패킷 손실이 발생된다. 본 고에서는 점보패킷을 수용하는 경우에도 기존의 일반 패킷 전단 지연 및 손실을 거의 동일하게 유지시킬 수 있는 스케쥴링 방법을 제안한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.229-236
• /
• 2020

The trend of water vapor contents in atmosphere is one of key elements for studying climate change. The tropospheric products, i.e., ZTD values achieved through GPS data processing can retrieve the amount of water vapor with higher temporal and spatial resolution than any other instruments. In this study, the tropospheric products of KASINET for a time period from 2001 to 2014 are reprocessed using PPP strategy and the products from the CODE's 2nd reprocessing campaign. For consistency with reprocessing activities of other networks like EPN, the VMF1 mapping function and non-tidal loading effect due to atmospheric pressure are applied in the process. The reprocessing results are investigated through comparing with the CODE's 2nd reprocessing products by including some IGS stations in the process and also calculating weekly coordinate repeatability to see the quality of the processing. After removing outliers based on the variation of averaged formal error, all processed stations have similar variations of formal error about 2 mm which is lower than that of the IGS final product. Comparison results with the CODE's 2nd reprocessing products show that the overall mean difference is found to be -0.28±5.54 mm which is similar level of the previous studies. Finally, the ZTD trends of all KASINET stations are calculated and the averaged trend is achieved as 0.19 mm/yr. However, the trend of each month shows different amounts and directions from -1.26 mm/yr in May to 1.18 mm/yr in August. In conclusion, the reprocessed tropospheric product and applied strategy of this study has enough quality as one of reliable solution for a reference product for Korean Peninsula which is needed to use GPSbased tropospheric product for climate change research.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.69-72
• /
• 2020

본 연구에서는 SnO₂ nanoparticles (NPs) 위에 TiO₂ NPs를 코팅하여 Quantum Dots Light Emitting Diodes (QLEDs)를 제작하였다. TiO₂ NPs는 SnO₂ NPs보다 conduction band minimum (CBM) 준위가 낮다. 따라서 SnO₂ 층과 발광층의 CBM 준위 사이에 위치해 에너지 장벽을 감소시키고, 전자의 이동을 원활하게 할 것으로 예상하였다. QLEDs는 inverted 구조로 제작되었으며, SnO₂ 단일층을 사용한 경우보다 발광 특성이 향상된 것을 확인하였다. 이중 전자수송층을 적용한 이번 연구를 통해 SnO₂를 QLEDs에 전자수송층으로 적용할 수 있을 것으로 기대한다.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.101-108
• /
• 2018

AA7010 is an Al-Zn-Mg-Cu alloy containing Zr, developed as an alternate to traditional AA7075 alloy owing to their high strength combined with better fracture toughness. It is necessary to improve the corrosion resistance and surface properties of the alloy by incorporating plasma electrolytic oxidation (PEO) method. AA7010-T7452 aluminum alloy has been processed through the forging route with multi-stage working operations, and was coated with $10{\mu}m$ thick $Al_2O_3$ ceramic aluminina coating using the plasma electrolytic oxidation (PEO) method. The corrosion, stress corrosion cracking (SCC) and nano-mechanical behaviours were examined by means of potentiodynamic polarization, slow strain rate test (SSRT) and nano-indentation tests. The results indicated that the additional thermomechanical treatment during the forging process caused a fully recrystallized microstructure, which lead to the poor environmental cracking resistance of the alloy in 3.5% NaCl solution, despite the overaging treatment. Although the fabricated PEO coating improved general corrosion resistance, the brittle nature of the coating did not provide any improvement in SCC resistance of the alloy. However, the hardness and elastic modulus of the coating were significantly higher than the base alloy.