• 인터넷정보학회논문지
• /
• 제17권5호
• /
• pp.9-16
• /
• 2016

Pervasive computing and Internet of Things (IoT) have recently received considerable interest to deploy solutions for the future Internet. Smart environments are integrated with Semantic Web to provide context-awareness to the processed information. Self-learning techniques have been adopted within smart solutions for efficient retrieval of data but do not process data with privacy parameters for in-place authorization. To overcome this issue, we present a novel approach of deploying access control as a service mechanism within Semantic Web based smart environment by using eXtensible Access Control Markup Language (XACML). The proposed XACML as a Service (XACMLaaS) approach offers fine-grained access control for protecting information within smart environment. In this paper, we have defined mathematical rules for each components of proposed access control service layer. These rules are for implementation of access control using XACML. The proposed approach allows the adaptation of authorization of information at component level and provides scalable solution for authorization policies and rule enforcement within smart environment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.146-146
• /
• 2015

We report the enhanced performance of poly(N-vinylcarbozole) (PVK)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based quantum-dot light-emitting diodes by inserting the polyaniline:poly (p-styrenesulfonic acid) (PANI:PSS) interlayer. The QD-LED with PANI:PSS interlayer exhibited a higher luminance and luminous current efficiency than that without PANI:PSS. Ultraviolet photoelectron spectroscopy results exhibited different electronic energy alignments of QD-LEDs with/without the PANI:PSS interlayer. By inserting the PANI:PSS interlayer, the hole-injection barrier at the QD layer/PVK interface was reduced from 1.45 to 1.23 eV via the energy level down-shift of the PVK layer. The reduced barrier height alleviated the interface carrier charging responsible for the deterioration of the current and luminance efficiency. This suggests that the insertion of PANI:PSS interlayer in QD-LEDs contributed to (i) increase the p-type conductivity and (ii) reduce the hole barrier height of QDs/PVK, which are critical factors leading to improve the efficiency of QD-LEDs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.206.2-206.2
• /
• 2015

최근 비정질 산화물 반도체 thin film transistor(TFT)는 차세대 투명 디스플레이로 많은 관심을 받고 있으며 활발한 연구가 진행되고 있다. 산화물 반도체 TFT는 기존의 비정질 실리콘 반도체에 비하여 큰 on/off 전류비, 높은 이동도 그리고 낮은 구동전압으로 인하여 차세대 투명 디스플레이 산업에 적용 가능하다는 장점이 있다. 한편 기존의 sputter나 evaporator를 이용한 증착 방식은 우수한 막의 특성에도 불구하고 많은 시간과 제작비용이 든다는 단점을 가지고 있다. 따라서 본 연구에서는 별도의 고진공 시스템이 필요하지 않을 뿐만 아니라 대면적화에도 유리한 용액공정 방식을 이용하여 박막 트렌지스터를 제작하였으며 thermal 열처리와 microwave 열처리 방식에 따른 전기적 특성을 비교 및 분석하고 각 열처리 방식의 열처리 온도 및 조건을 최적화 하였다. 제작된 박막 트렌지스터는 p-type bulk silicon 위에 산화막이 100 nm 형성된 기판에 spin coater을 이용하여 Al-Zn-Sn-O 박막을 형성하였다. 연속해서 photolithography 공정과 BOE (30:1) 습식 식각 과정을 이용해 활성화 영역을 형성하여 소자를 제작하였다. 제작 된 소자는 Pseudo-MOS FET구조이며, 프로브 탐침을 증착 된 채널층 표면에 직접 접촉시켜 소스와 드레인 역할을 대체하여 동작시킬 수 있어 전기적 특성평가가 용이하다는 장점을 가지고 있다. 그 결과, microwave를 통해 열처리한 소자는 100oC 이하의 낮은 열처리 온도에도 불구하고 furnace를 이용하여 열처리한 소자와 비교하여 subthreshold swing(SS), Ion/off ratio, field-effectmobility 등이 개선되는 것을 확인하였다. 따라서, microwave 열처리 공정은 향후 저온 공정을 요구하는 MOSFET 제작 시의 훌륭한 대안으로 사용 될 것으로 기대된다.

• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.296-300
• /
• 1997

Glucose syrup and lactose, mixed with citric acid as a polymerizing catalyst, was processed using twin screw extruder, in which 40 of L/D(length/diameter) ratio was designed to provide sufficient retention in extruder for polymerization of sugars. The polymerization yields of glucose syrup were 36.90%, 55.44% and 77.10% at 160, 180 and 20$0^{\circ}C$, respectively, while those of lactose were 26.45%, 38.16% and 45.86% at the same temperatures. Gel permeation chromatography exhibited that the higher molecular weight fractions were increased with extrusion temperature, which also led to increasing hydrodynamic intrinsic viscosity. Both uco-oligosaccharides and lacto-oligosaccharides produced by extrusion of glucose syrup and lactose were stable for thermal treatments over a wide range of pH3.0~11.0. In addition, $\alpha$-amylase and amyloglucosidase treatment of gluco-oligosaccharides did not affect the solution viscosity, indicating the random linkage rather than $\alpha$-1, 4 linkages of glucose and thus the potential applications as a dietary fiber. In this research it was clearly observed that twin screw extrusion can be successfully utilized to produce gluco-oligosaccharides and lacto-oligosaccharides rapidly and continuously in conjunction with selective control of polymerized composition.

• 한국레이저가공학회지
• /
• 제16권4호
• /
• pp.12-16
• /
• 2013

For mass production of electronic devices, the processing of the printing roll is one of the most important key technologies for printed electronics technology. A roll of printing process, the gravure printing that is used to print the electronic device is most often used. The indirect laser processing has been used in order to produce printing roll for gravure printing. It consists of the following processing that is coating of photo polymer or black lacquer on the surface of printing roll, pattering using a laser beam and etching process. In this study, we have carried out study on the coating and etching for $25{\mu}m$ line width on the printing roll. To do this goals, a $4{\mu}m$ coating thickness and 20% average coating thickness of the coating homogeneity of variance is performed. The factors to determine the thickness and homogeneity are a viscosity of coating solution, the liquid injection, the number of injection, feed rate, rotational speed, and the like. After the laser patterning, a line width of $25{\mu}m$ or less was confirmed to be processed through etching and the chromium plating process.

• 수산해양기술연구
• /
• 제46권1호
• /
• pp.70-81
• /
• 2010

A mathematical model is formulated to study the effect of wall mass on the thermal performance of four different houses of different construction. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one -dimensional, linear, partial differential equation for wall temperature profiles and room air temperatures is obtained using the Laplace transform method. Typical Meteorological Year data are processed to yield hourly average monthly values. These discrete data are then converted to a continuous, time dependent form using a Fast Fourier Transform method. This study is conducted using weather data from four different locations in the United States: Albuquerque, New mexico; Miami, Florida; Santa Maria, California; and Washington D.C. for both winter and summer conditions. A computer code is developed to calculate the wall temperature profile, room air temperature, and energy consumption loads. Three sets of results are calculated one for no auxiliary energy and two for different control mechanism -- an on-off controller and a proportional controller. Comparisons are made for the cases of two controllers. Heavy weight houses with insulation in mild weather areas (such as August in Santa Maria, California) show a high comfort level. Houses using proportional control experience a higher comfort level in comparison to houses using on-off control. The result shows that there is an effect of mass on the thermal performance of a heavily constructed house in mild weather conditions.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2007년도 춘계학술대회
• /
• pp.391-399
• /
• 2007

There has been an increasing preference for product with cultural value as people have a growing cultural sensitivity and greater demand for cultural value in current global market. In response to that, countries need to develop cultural products which represent their distinctive cultures and traditions, and such efforts may aim to promote the creation of economically high value-added and enhance the cultural image. In this paper, first, we analyze the correlation between Culture, cultural industry and Cultural goods. In this context, my efforts centered initially on a thorough analysis on the current situation and environmental problems that Korean culture faces presently, and then, processed and organized them into major industry categories of character industry, through a statistical methodology, to estimate its market volume by industry and to analyze the inter-relationship and macro-economic pervasive effects among related industries as well as cultural window effects. This paper could lead to final practical solution and suggestions for optimum policy measures to be taken for a supreme cultural industry for Korea.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.165-171
• /
• 2005

본 논문에서는 중앙집중형 동적부하균등을 효율적으로 처리하기 위하여 네트워크기반 병렬 유전자 알고리즘을 이용하였다. 기존의 유전자 알고리즘을 적용한 경우와는 달리 클라이언트들에서 최적작업 할당의 탐색을 분산처리하여 중앙 스케줄러의 성능을 향상시킬 수 있었다. 최적해의 수렴속도를 향상시키기 위해 선택연산은 룰렛휠 선택과 엘리트 보존전략을 함께 사용하였고, 염색체 인코딩은 슬라이딩윈도우기법을 이용하였으며 교차연산은 주기교차방법을 이용하였다. 부하균등기법의 유연성 변화에 따른 중앙 스케줄러의 성능을 모의실험한 결과 기존의 방법보다 성능이 향상됨을 확인하였다.

• BMB Reports
• /
• 제32권5호
• /
• pp.486-491
• /
• 1999

An engineered cDNA from Phanerochaete chrysosporium encoding both the mature and propeptide-sequence regions of lignin peroxidase H2 (Lip H2) was overexpressed in Escherichia coli BL21 (DE3) to evaluate its catalytic characteristics and potential application as a pollution scavenger. All expressed proteins were aggregated in an inactive inclusion body, which might be due to inherent disulfide bonds. Active enzyme was obtained by refolding with glutathione-mediated oxidation in refolding solution containing $Ca^{2+}$, heme, and urea. Propeptide-sequence region was not processed as evidenced by N-terminal sequence analysis. Recombinant Lip H2 (rLip H2) had the same physical properties of the native protein but differed in the $K_{cat}$. Catalytic efficiency ($k_{cat}/K_m$) of rLip H2 was slightly higher than that of the native enzyme. In order to express an active protein, fusion systems with thioredoxin or Dsb A, which have disulfide isomerase activity, were used. The fused proteins expressed by the Dsb A fusion vector were aggregated, whereas half of the thioredoxin fusion proteins were recovered as a soluble form but still catalytically inactive. These results suggest that Lip H2 may not be expressed as an active enzyme in Escherichia coli although the activity can be recovered by in vitro refolding.

• 한국분말재료학회지
• /
• 제16권2호
• /
• pp.122-130
• /
• 2009

Austenitic oxide-dispersion-strengthened (ODS) stainless steel was fabricated using a wet mixing process without a mechanical milling in order to reduce contaminations of impurities during their fabrication process. Solution of yttrium nitrate was dried after a wet mixing with 316L stainless steel powder. Carbon and oxygen contents were effectively reduced by this wet processing. Microstructural analysis showed that coarse yttrium silicates of about 150 nm were formed in austenitic ODS steels with a silicon content of about 0.8 wt%. Wet-processed austenitic ODS steel without silicon showed higher yield strength by the presence of finer oxide of about 20 nm.