• Korean journal of applied entomology
• /
• v.16 no.2 s.31
• /
• pp.127-131
• /
• 1977

This experiment was conducted to evaluate the insect-proof netting, chemical sprays, application of attractants, fruit bagging and light trapping as the control methods of the fruit piercing moths in the orchards on reclaimed land in Sugyeri, Goksung, Chonnam Province, during June to October in 1976. The results are summarized as follows; 1. Insect-proof. netting effectively decreased fruit damage, compared as to the control, down to $9.4\%$ from $38.3\%$ in plum, $2.5\%$ from $53.0\%$ in peaches and $10.0\%$ from $29.0\%$ in grapes. 2. The control effects of chemicals varied significantly among the 7 insecticides tested: Deoclean, Naphthalene, and Thiometon were more effective to the fruit damages as low as $2.0\%,\; 3.6\%,\;and\;5.9\%$ respectively. while the fruit damage was rather high, $9.8\%$ for Demeton, $10.1\%$, for Takju +lead arsenate and $14.2\%$ for Padan. ,3. In the test with 7 attractants, the largest number of moths attracted and killed was 416.by Takju+brown sugar and the next was 307 by Takju+venegor while this number was 141 by mixed solution (see text) which is rather lower than expectation The fruit damage was lowest in Takju+honey and$5.2\%$, the next was $5.60\%$ for Takju+venegor and the highest was $12.0\%$, Takju alone. 4. Fruit bagging with polyethylene film effectively decreased the fruit damage from the inserts but brought about severe fruit rot and delay ripening. Meanwhile, paper bagging was less effective in preventing insects, resulting in $17.5\%$ fruit damage, however, gave no adverse effect other than slight Belay in ripening. 5. Light trapping was hardly expected to be a method of controlling these fruit piercing moths. However, the number of collected moths swarmed by electric light was 10.8 for can-descence, 0.95 for blue, and 0.22 for yellow light.

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.89-97
• /
• 2005

Recently, for the problem solution of demand and supply imbalance of fine aggregate due to the shortage of natural fine aggregate resource and the environment regulation on sea sand extraction in the construction field, the studies for the application of recycled fine aggregate using waste concrete are being progressed versatilely. On the other hand, the treatment of fly-ashes that of industrial by-product originated in the steam power plant is discussed by the continuous increasing of origination quantities. In the ease of using fly-ash, advantages are the improvement of workability, viscosity and long-time strength, and the reduction of hydration heat under the early ages, as the admixtures for concrete, but the studies for the application of fly-ash as recycled concrete admixtures are inadequacy. There fore, in this study, through investigating the properties of fresh, hardened and durability according to the replacement of recycled fine aggregate and fly-ash, it is intended to propose the fundamental data for structural application of recycled concrete using recycled fine aggregate and fly-ash. As the result of this study, they arc shown that the engineering properties and durability, in the case of replacement ratio 100% of recycled fine aggregate, arc similar to those of concrete using natural fine aggregate, so it is considered that recycled fine aggregate could be used as the fine aggregate for concrete. Also, the performances of recycled concrete are improved by replacing fly-ash.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1977

The purpose of this study is to complish a method of fish glue malting with residual products such as fish head and skin discarded from sea food processing. Using the skins of Alaska pollack and file fish from fillet packers, the optimum conditions of skin glue processing were investigated and physical and chemical properties of the product were also determined. The yields of Alaska pollack, Thelagra calcogramma, skin and file fish, Novodon modestus, skin to the total body weight were $4.6\%\;and\;5.0\%$ respectively. The optimum conditions for a $49.3\%$n yield Alaska pollack skin glue processing were considered the extraction of previously tinted in $0.1\%$ calcium hydroxide solution for 3 hours with the additional water as much as 3 times of sample weight at $70^{\circ}C$ for 3 hours under the controlled pH 5.0. The conditions for file fish skin glue were similar to those of Alaska pollack except the addition of five times of water to the weight of sample skin needed for extraction. The content of crude protein of Alaska pollack and file fish skin glue were $98.0\%\;and\;96.0\%$ respectively. The contents of crude ash and crude lipid were not different from that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of Alaska pollack skin glue marked 5.84, $21.8^{\circ}C,\;7.1^{\circ}C\;and\;10.0g$ respectively and those of file fish skin glue showed $5.79,\;25.0^{\circ}C,\;7.4^{\circ}C\;and\;11.6g$ respectively.The color and turbidity of Alaska pollack skin glue are slightly superior to those of file fish skin glue. It is supposed that the extract residue of skin glue is valuable for use the animal feeds by the results of amino acid composition. And the ratio of each amino acid content to the total amino acid of Alaska pollack and file fish skin glue is similar to that of chemical grade gelatin.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.3
• /
• pp.145-168
• /
• 2007

Current researches have been proceed on CEO's Characteristics of venture business because the CEO has considered as one of the important factors for the success of venture business. But prior research on the performance of venture business has produced inconsistently in terms of CEO's characteristics. The purpose of this study is to develop a comprehensive model for the relation between the performance and a type of CEO's characteristics by a growth process of venture business, which is the main subject of analysis in venture business. Also, this study analyzes various CEO's characteristics and the effects for performance of venture business which are in the Daedeok valley. To achieve the purpose of this research, an empirical study by using research model and hypotheses including the general characteristics of venture business and CEO's demographic characteristics has been presented as a research method for relation analysis. The principal findings of the research and its significance are summarized as follows: First, it was found that there is a significant different in the performance of CEO's behavioral characteristics by the scale, type and growing step of organization for venture business. Second, it was found that there is not a significant between an academic career, management experience, foundation experience for business and related working experience of venture CEO and the performance, but there os a partially significant difference in CEO's behavioral characteristics. Third, it was found that there is a partially significant difference between CEO's behavioral characteristics of venture business and the performance by the general characteristics of organization for venture business and demographic characteristics. In conclusion, in spite of the insufficient research for venture business in Daedeok, the implications of theses findings and contributions made by this research is to confirm the characteristics factor of CEO for venture business and general characteristics of organization for venture business by multidisciplinary side. In addition, the findings provide the basis for the analyzing of managerial strong point and weak point referred to supporting system for venture business. Finally, the findings of this study suggest that the results should be a useful data for groping a solution for upbringing plans in terms of a long-term point of view.

• Korean Journal of Organic Agriculture
• /
• v.22 no.1
• /
• pp.97-113
• /
• 2014

An actual proof experiment was carried out to establish the production of high quality organic rice at farm household in Gwangjin, Junnam, Korea 2011. Experimental plot was designed with conventional organic cultivation and manual organic cultivation in both Hopeongbyeo and Onnuri varities. Experimental field was consisted with suitable drainage loam soil, anryong series, and normal paddy field. Chemical characteristics of the soil were investigated from initial soil and soil after harvest in experimental sites. Seed disinfection was treated with hot water dipping method at $60^{\circ}C$ for 10 min. Rice transplanting was carried out at 17 June with 25 days seedling using machine transplanting. Golden apple snail was used to prevent weed growth as middle size (1.5~1.7 kg/10a) at one week after rice transplanting. Amount of applied fertilizer in experimental plot was supplied with organic fertilizer for the shortage after harvest of hairy vetch (1,100 kg/10a). Bordeaux mixture was used to control of sheath blight and neck blast disease in all experimental plot at 19 Aug. Application of chitin culture solution was treated in manual organic cultivation at 2 and 15 Aug. At late growth stage, incidence rate of neck blast was the highest level at Hopyeongbyeo in conventional organic cultivation. Incidence rate of sheath blight in both Hopyeongbyeo and Onnuri was higher in conventional organic cultivation than in manual organic cultivation. Incidence of rice leaf folder was the highest level at Onnuri in conventional organic cultivation. Yield index in manual organic cultivation was increased by 13% and 38% at Onnuri and Hopyeongbyeo, respectively, compared with conventional organic cultivation. Head rice percentage in both Hopyeongbyeo and Onnuri was slightly increased in manual organic cultivation. These results indicate that high quality production of rice organic cultivation could be depending on management of safe fertilization with nutrient content in soil.

• Clean Technology
• /
• v.20 no.3
• /
• pp.306-313
• /
• 2014

Nanoporous $TiO_2$ films are commonly used as working electrodes in dye-sensitized solar cells (DSSCs). So far, there have been attempts to synthesize films with various $TiO_2$ nanostructures to increase the power-conversion efficiency. In this work, vertically aligned rutile $TiO_2$ nanorods were grown on fluorinated tin oxide (FTO) glass by hydrothermal synthesis, followed by deposition of an anatase $TiO_2$ film. This new method of anatase $TiO_2$ growth avoided the use of a seed layer that is usually required in hydrothermal synthesis of $TiO_2$ electrodes. The dense anatase $TiO_2$ layer was designed to behave as the electron-generating layer, while the less dense rutile nanorods acted as electron-transfer pathwaysto the FTO glass. In order to facilitate the electron transfer, the rutile phase nanorods were treated with a $TiCl_4$ solution so that the nanorods were coated with the anatase $TiO_2$ film after heat treatment. Compared to the electrode consisting of only rutile $TiO_2$, the power-conversion efficiency of the rutile-anatase hybrid $TiO_2$ electrode was found to be much higher. The total thickness of the rutile-anatase hybrid $TiO_2$ structures were around $4.5-5.0{\mu}m$, and the highest power efficiency of the cell assembled with the structured $TiO_2$ electrode was around 3.94%.

• Journal of Elementary Mathematics Education in Korea
• /
• v.5 no.1
• /
• pp.99-120
• /
• 2001

The purpose of this thesis is to find the guiding direction of mathematical communication in lower grade students of elementary school and to present a new direction about the effect of using concrete material in communication. It is expected that mathematical communication increases when concrete material is used for the students of the lower grades, who are in concrete operational period. Therefore, this study ai s to investigate what characteristics there are in mathematical communication of second grade students and what effect concrete materials have on mathematical communication and learning. The analysis of the teaching record shows that the second grade students use alternative terms in the process of communication since they are not familiar with mathematical symbols or terms, which is a characteristic of communication in a mathematics class in which concrete material is used. In the process of teaming the students apply their living experiences to their teaming. Since a small number of students lead class, the interaction between students is also led by them. The direction of communication in a small group is not centered around solution of a problem, and most students show a more interest in finding answers than in the process of learning. The effect that concrete material has on communication plays an important role in promoting students' speaking activity; it allows students to identify and correct their errors more easily. It also makes students' activities more predictable, and it increases a small group activities through the medium of concrete material. However, it was also noticed that students' listening activities are not appropriately developed since they do not pay attention to a teacher who uses concrete material. The effects that concrete material has on mathematics class can be summarized as follows. Concrete material promotes students' participation in class by triggering their interest of learning of mathematics and helps them to understand the course of learning. It also helps the teaming and formation of concepts for children of low academic performance. And it makes a phased learning possible according to students' ability to use concrete material and to solve a problem. Based upon the results above mentioned, the use of concrete material is absolutely needed in mathematics classes of lower grade elementary school students since it increases communication and gives much influence on mathematics learning. Therefore, teachers need to develop teaching or learning method which can help increase communication, considering the characteristics of students' communication.

• Science of Emotion and Sensibility
• /
• v.7 no.1
• /
• pp.65-81
• /
• 2004

With the arrival of the 21th century, the management environments such as the knowledge system, information system, and technology system surrounding small and medium enterprises are being rapidly changed. These rapidly changing the environment of enterprises like the above can be thought rather profitable for the elastic and resiling medium enterprises than large enterprises. Additionally, these environments are recognized as the management circumstances which provide with the change by which medium enterprises equipped with the trustworthy creativity in the 21th century are able to become the main player of the industrial development. The position and role of medium enterprises in the national economical system are very important. The execution of the local autonomy system and the policy to activate the local economy will generally enlarge the power of medium enterprises which are based on the concerned local society more ant more. But, by the standpoint of designer, it is pointed out that there is the problem that the effective application means or the availability of the industrial design was not sufficiently recognized or understood by the manager in enterprises. Notwithstanding the above problem, a lot of domestic small and medium enterprises became to apply the industrial design as the means for improving the competitiveness of their own products in the relatively short time powered by the governmental policy, and moreover both of the concerned partners(the manager and industrial designer) had the opportunity to newly recognize the industrial design and evaluate the availability or problem of the industrial design in the actual aspect. This event means very important change. With the understanding on the above situation, the purpose of this study is to recognize whether the design is strategically applied in the management level of domestic small and medium enterprises, whether the strategical establishment of the design management is performed without any problem, whether the field designer and CEO are well recognizing the design management and what their recognition level is in order to seek the new solution for plenty of problems. Therefore, the actual proof analysis was performed for the field designer and management CEO of small and medium enterprises with the questionnaire survey and direct interview method to understand the actuality of small and medium enterprises.

• Journal of Chest Surgery
• /
• v.33 no.3
• /
• pp.221-229
• /
• 2000

Background: Thromboxane A2 and endothelin-1 are the potent vasoconstrictors affecting pulmonary pathophysiology in response to whole body inflammatin following CPB. Aprotinin, as an antiiflammatory agent, may decrease the release of such vasoactive substance from pulmonary tissues, preventing pulmonary hypertension after cardiopulmonary bypass. Material and Method: Ten mongrel dogs(Bwt. ac. 20kg) were subjected to cardioupulmonary bypass for 2 hours and postbypass pulmonary vascular resistance(0, 1, 2, 3 hours) were compared with prebypass level. The dogs were divided into 2 groups; control group(n-5) and aprotinin group(n=5). In the aprotinin group, aprotinin was administered as follows; 50,000 KIU/kg mixed in pump priming solution, 50,000 KIU/kg prebypass intravenous infusion over 30 minutes, 10,000 KIU/kg/hour postbypass continuous infusion. Prebypass and postbypass 0, 1, 2, 3 hour pulmonary vascular resistance were measured. At prebypass and postbypass 0, 90, 180 minutes, blood samples were obtained from pulmonary arterial and left atrial catherers for the assay of plasma thromboxane B2 a stable metabolite of thromboxane A2, and endothelin-1 concentrations. Result: The ratios of pustbypass over prebypass pulmonary vascular at postbypass 0, 1, 2, 3 hours were 1.28$\pm$0.20, 1.82$\pm$0.23, 1.90$\pm$0.19, 2.14$\pm$0.18 in control group, 1.58$\pm$0.18, 1.73$\pm$0.01, 1.66$\pm$0.10, 1.50$\pm$0.08 in aprotinin group ; the ratios gradually increased in control group while decreased or fluctuated after postbypass 1 hour in aprotinin group. There was statistically significant difference between control group and aprotinin group at postbypass 3 hours(P=0.014). Pulmonary arterial plasma concentration of thromboxane B2(pg/ml) at prebypass, postbypass 0, 90, 180 minutes were 346.4$\pm$61.9, 529.3$\pm$197.6, 578.3$\pm$255.8, 493.3$\pm$171.3 in control group, 323.8$\pm$118.0, 422.6$\pm$75.6, 412.3$\pm$59.9, 394.5$\pm$154.0 in aprotinin group. Left atrial concentrations were 339.3$\pm$89.2, 667.0$\pm$65.7, 731.2$\pm$192.7, 607.5$\pm$165.9 in control group, 330.0$\pm$111.2, 468.4$\pm$190.3, 425.4$\pm$193.6, 4.7.3$\pm$142.8 in aprotinin group. These results showed decrement of pulmonary thromboxane A2 generation in aprotinin group. Pulmonary arterial concentrations of endothelin-1(fmol/ml) at the same time sequence were 7.84$\pm$0.31, 13.2$\pm$0.51, 15.0$\pm$1.22, 16.3$\pm$1.73 in control group, 7.76$\pm$0.12, 15.3$\pm$0.71, 22.6$\pm$6.62, 14.9$\pm$1.11 in aprotinin group. Left atrial concentrations were 7.61$\pm$17.2, 57.1$\pm$28.4, 18.9$\pm$18.2, 31.5$\pm$20.5 in control group, 5.61$\pm$7.61, 37.0$\pm$26.2, 28.6$\pm$21.7, 37.8$\pm$30.6 in aprotinin group. These results showed that aprotinin had no effect on plasma endothelin-1 concentration after cardiopulmonary bypass. Conclusion: Administration of aprotinin during cardiopulmonary bypass could attenuate the increase in pulmonary vascular resistance after bypass. Inhibition of pulmonary thromboxane A2 generation was thought to be one of the mechanism of this effect. Aprotinin had no effect on postbypass endothelin-1 concentration.