• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2019

A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.513-521
• /
• 2018

Purpose: The purpose of this study was to assess the effectiveness and complications of an ultrasound-guided axillary brachial plexus block performed by orthopedic surgeons. Materials and Methods: From March to May 2017, an ultrasound-guided axillary brachial plexus block was performed on a total of 103 cases of surgery. A VF13-5 transducer from Siemens Acuson X300 was used. The surgical site was included in the range of the anatomic sensory distribution of the blocked nerve, except for the case where an operation time of more than 2 hours was expected due to multiple injuries and the operation of the upper arm. The procedure was performed by 2 orthopedic surgeons in the same method using 50 ml of solution (20 ml of lidocaine HCl in 2%, 20 ml of ropivacaine in 0.75%, 10 ml of normal saline in 0.9%). The success rate of anesthesia induction during surgery, anesthetic induction time, anatomical range of operation, duration of postoperative analgesia and complications were investigated. Results: The results from the 2 practices were similar. The anesthesia was successful in 100 out of 103 patients (97.1%). In these patients, the average needling time was 5.5 minutes (2.5-13.2 minutes), the average induction time to complete anesthesia was 18.4 minutes (5-40 minutes), and the average duration of postoperative analgesia was 402.8 minutes (141-540 minutes). The post-anesthesia immediate complications were dizziness in 1 case, nausea and vomiting in 4 cases, and peri-oral numbness in 2 cases, but surgery was performed without problems. All these 7 cases with complications recovered on the same day. A total of 3 cases failed with anesthesia, and they were treated by an injection with local anesthesia in the operation room in 2 cases and switched to general anesthesia in 1 case. Conclusion: An ultrasound-guided axillary brachial plexus block, which was performed by orthopedic surgeons allows anesthesia in a brief period and the high success rates of anesthesia for certain surgeries of the elbow and surgeries on forearm, wrist and hand. Therefore, it can reduce the waiting time to the operating room. This technique is a relatively safe procedure and dose selective anesthesia is possible.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.489-495
• /
• 2020

Whereas the control of the hydration heat in mass concrete has been important as the concrete structures enlarge, many conventional strategies show some limitations in their effectiveness and practicality. Therefore, In this study, as a solution of controling the heat of hydration of mass concrete, a method to reduce the heat of hydration by controlling the hardening of cement was examined. The reduction of the hydration heat by the developed Phosphate Inorganic Salt was basically verified in the insulated boxes filled with binder paste or concrete mixture. That is, the effects of the Phosphate Inorganic Salt on the hydration heat, flow or slump, and compressive strength were analyzed in binary and ternary blended cement which is generally used for low heat. As a result, the internal maximum temperature rise induced by the hydration heat was decreased by 9.5~10.6% and 10.1~11.7% for binder paste and concrete mixed with the Phosphate Inorganic Salt, respectively. Besides, the delay of the time corresponding to the peak temperature was apparently observed, which is beneficial to the emission of the internal hydration heat in real structures. The Phosphate Inorganic Salt that was developed and verified by a series of the aforementioned experiments showed better performance than the existing ones in terms of the control of the hydration heat and other performance. It can be used for the purpose of hydration heat of mass concrete in the future.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.529-540
• /
• 2021

This study is a test of gender differences between the importance of basic psychological needs and the components of love. The need for research is to verify the relationship between need and love. The purpose of this study is to serve as basic data for preparing a solution to the relationship between lovers and promoting love. Research participants targed a total of 193couples unmarried love couples, 386 person living in Seoul and Gyeonggi metropolitan areas. For the research tools, the basic psychological needs importance scale and components of love scale had been used. Regarding the analysis of the data, as a statistical analysis using SPSS 22, the t-verification, the correlation analysis, and the regression analysis method had been carried out. As a result of the analysis, regarding the importance of the basic psychological needs, regarding the relationship, the females were meaningfully (t=-3.528, p<.01) higher than the males. And, among components of love, regarding the passion and the commitment, the males were meaningfully (t=3.588, p<.001) higher than the females. And, regarding the correlations between the main variables, it appeared that the basic psychological needs importance of the males has a correlation with the components of love. And, regarding the females, it appeared that, among the basic psychological needs importance, only the relationship and the capability have the relationships with the components of love. Regarding the influence of the basic psychological needs importance on the component of love, it appeared that the relationship need importance of the males has a positive (+) influence on the component of love. And, regarding the autonomy need of the males, it appeared that, among the component of love, it has a negative (-) influence on the passion and the commitment. Regarding the females, it appeared that, differently from the males, only the need for a relationship has a positive (+) influence on the components of love. It was found that women's relationship needs had a positive effect on the components of love, but women's desire for autonomy did not affect the components of love, unlike men. Therefore, the importance of the basic psychological needs of love couples influenced the love relationship, and the relationship between the variables showed gender differences. If love couple understands and meets the importance of each other different basic psychological needs when a conflict arises, it will be a helpful resource for resolving conflict and promoting love.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2022

A lateral flow immunoassay (LFIA) method using carbon nanodot@silica as a signaling material was developed for analyzing the concentration of retinol-binding protein 4 (RBP4), one of the lung cancer biomarkers. Instead of antibodies mainly used as bioreceptors in nitrocellulose membranes in LFIA for protein detection, aptamers that are more economical, easy to store for a long time, and have strong affinities toward specific target proteins were used. A 5' terminal of biotin-modified aptamer specific to RBP4 was first reacted with neutravidin followed by spraying the mixture on the membrane in order to immobilize the aptamer in a porous membrane by the strong binding affinity between biotin and neutravidin. Carbon nanodot@silica nanoparticles with blue fluorescent signal covalently conjugated to the RBP4 antibody, and RBP4 were injected in a lateral flow manner on to the surface bound aptamer to form a sandwich complex. Surfactant concentrations, ionic strength, and additional blocking reagents were added to the running buffer solution to optimize the fluorescent signal off from the sandwich complex which was correlated to the concentration of RBP4. A 10 mM Tris (pH 7.4) running buffer containing 150 mM NaCl and 0.05% Tween-20 with 0.6 M ethanolamine as a blocking agent showed the optimum assay condition for carbon nanodot@silica-based LFIA. The results indicate that an aptamer, more economical and easier to store for a long time can be used as an alternative immobilizing probe for antibody in a LFIA device which can be used as a point-of-care diagnosis kit for lung cancer diseases.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2015

This study was conducted to develop the fertigation system with a peristaltic hose pump and brushless DC motor. The fertigation system was consisted of sensor, main controller, motor control unit, peristaltic pump, water supply pump, control panel, and filter. The peristaltic pump discharges liquid by squeezing the tube with rollers. Rollers attached to the external circumference of the rotor compresses the flexible tube. The fluid is contained within a flexible tube fitted inside a circular pump casing. The developed fertigation system has no mixing tank but instead injects directly a concentrated nutrient solution into a water supply pipe. The revolution speed of the peristaltic pump is controlled by PWM (Pulse width modulation) method. When the revolution speed of the peristaltic pump was 300rpm, the flow rate of the 3.2, 4.8, 6.3mm diameter tube was 202, 530, 857mL/min, respectively. As increasing revolution speed, the flow rate of the peristaltic pump linearly increased. As the inner diameter of a tube larger, a slope of graph is more steep. Flow rate of three roller was more than that of four roller. Flow rate of a norprene tube with good restoring force was more than that of a pharmed tube. As EC sensor probe was installed in direct piping in comparison with bypass piping showed good performance. After starting the system, it took 16~17 seconds to stabilize EC. The maximum value of EC was 1.44~1.7dS/m at a setting value of 1.4dS/m. The developed fertigation system showed ±0.06dS/m deviation from the setting value of EC. In field test, Cucumber plants generally showed good growth. From these findings, this fertigation system can be appropriately suitable for fertigation culture for crops.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.246-262
• /
• 2023

This study analyzed policy implementation factors focusing on how Donuimun, a demolished cultural heritage, was digitally restored and the policy implementation process of Donuimun Gate restoration. Through this, the characteristics of the implementation process of the digital Donuimun Gate restoration policy promoted by public-private multilateral collaboration were examined and implications were sought for how institutions with different interests solved problems and collaborated in the implementation process. The research method was focused on policy implementation factors including policy executive factors, policy content factors, policy resource factors, and policy environment factors, and the process was analyzed for each detailed component. Along with literature analysis, in-depth interviews were conducted with participants in policy implementation. As a result of the study, first, it was found in the policy executive factor that the quick decision-making leadership of the policy manager and the flexible attitude of the person in charge of the government agency had a positive effect on preventing conflicts between different interest groups. Second, in terms of policy content, establishing a common goal that everyone can accept and moving forward consistently gave trust and created synergy. Third, in the policy implementation resource factor, the importance of the budget was emphasized. Finally, as an environmental factor for policy implementation, the opening of 5G mobile communication for the first time along with the emergence of the Fourth Industrial Revolution at the time of policy implementation acted as a timely factor. The digital Donuimun Gate was the first case of restoring a lost cultural heritage with AR and VR, and received attention and support from the mass media and the public. This also shows that digital restoration can be a model case that can be a solution without conflicts with local residents where cultural heritages are located or conflicts between stakeholders in the preservation and restoration of real objects.

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.249-255
• /
• 2023

Korean melon (Cucumis melo L.) is grown mostly in Northeast Asia area, and as a fruit mainly produced in Korea, the yield per unit area continues to improve, but the cultivation method is limited to soil cultivation, so it is necessary to develop hydroponic cultivation technology for scale and labor-saving is needed. As the ratio of NO₃^- increased, the plant height, the leaf length, the leaf width, and the internode length became longer and larger. On the other hand, the SPAD value decreased. The lower the ratio of NO₃^-, the faster the female flower bloom, and there was no difference in fruit maturity between treatments. There was no difference in the shape of fruit according to the ratio of NO₃^-, and the hardness was higher as the ratio of NO₃^- was lower. The total yield from March to July was KM3 5,650 kg/10a and KM1 4,439 kg/10a, 27% higher in KM3 and, in particular, 36% higher in quantity from March to May, when Korean melon prices were high season. Therefore, it was judged that it would be appropriate to supply NO₃^- suitable for hydroponic cultivation of Korean melon, which was formalized in December and produced from spring, at the level of 6.5 to 10 me·L^-1.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.54-60
• /
• 2024

This study investigated the effectiveness of using pathogens and aqueous acids to reduce the Aspergillus ochraceus and Rhodotorula mucilaginosa contamination in livestock production environments. For this study, 1 mL of each bacterial suspension (10⁷-10⁸ spores/mL) was inoculated on a knife surface, dried at 37℃, and used under each treatment condition. First, to investigate the effect of organic acids, acetic, lactic, and citric acids were used. Subsequently, to select the appropriate concentration, they were prepared at concentrations of 0.5, 1, 2, 3, 4, and 5%, respectively. Accordingly, to further maximize the effect of organic acid treatment, we combined the treatment with ultraviolet light. The two strains showed a significant difference (P<0.05) compared to the initial strain, with a greater than 90% decrease in the concentrations of all organic acids. Consequently, acetic and lactic acids decreased by approximately 5 and 2 log colony forming unit (CFU)/cm², respectively, when treated with ultraviolet light (360 mJ/cm²); however, citric acid decreased by less than 1 log CFU/cm². However, when manufactured with 4% acetic acid, a severe malodor was emitted, making it difficult for workers to use it in a production environment. Accordingly, the optimal treatment conditions for organic acid and ultraviolet light for application were selected as follows: immersion in a 4% lactic acid solution for 1 minute and then, sterilization with ultraviolet light at 360 mJ/cm². Finally, when a pork meat sample was cut with a knife that was finally washed with lactic acid and treated with ultraviolet light, the low level of inoculum transferred from the cleaned knife to the surface of the sample was not detected. In conclusion, using this established method can prevent cross-contamination of the surface of the meat during processing.

• Child Health Nursing Research
• /
• v.2 no.1
• /
• pp.93-111
• /
• 1996

The purpose of the study is to identify the lived experience of mothers who have children with cerebral palsy in order to understand their agony. Moreover, the result of study was to find some nursing intervention for disabled children and their mothers. For this purpose, ten mothers who are willing to cooperate with this research were selected at random from those who have children with the cerebral palsy, currently using the municipal facilities for the handicapped with cerebral malfunction. Data collection was done from October 4, 1994 th December 31, 1994. The data were collected by asking the mothers mentioned above with some unstructured open-ended questions, recorded on the tapes with permission by the interviewee in order to prevent missing of the interviewed contents. These collected data have been substantiated and properly analyzed on the basis of phenomenological approach initiated by Colaizzi's method. The results and validity are proved to be credible by means of the individual checking of the interviewed mothers. The results of this study are as follows : 1. When the mother is first informed of the diagnosis of cerebral palsy on her child, she usually misses the crucial timing needed for proper treatment of the child's disorder because she is notified through the doctor's indifference and his apparently inactive, matter-of-fact attitude. At first she suspects the doctor's diagnosis and tries to attribute it to the unknown cause from a certain genetic problem and then she quickly wants to deny the whole situation that her child is really suffering from the cerebral palsy. The reality is too much for her to accept as it is and she would not believe her child is abnormal. Therefore, she even attempts depend on the power of God for its solution. 2. The mother, who goes thorough this kind of uncommon experiences, is totally devoted to the treatment and care of the child and completely ignores her own life and happiness. At the same time, she feels sorry for her other normal children she believes having not enough care and concern. Also, she feels sorry for the sick child when the child's brothers or sisters show special concern for the patient out of sympathy. It is sorry and not satisfied for her that the child is growing with abnormality and neighbor other around have inappropriate attitudes. Likewise, she is discontent with her husband's lack of concern about the child's treatment. She believes that the health care system in this society isn't fulfilling its due purpose. In the state of her utmost distress and anxiety, she always feels the need of competent consultants, and is angry about that her child is treated as an abnormal being, she is trying to hide the child from other people and to make him or her disappear, if possible. Although she doesn't have harmonious relation with her husband, she id happy when he shows his affection for the child and she feels relieved and thankful when the relatives don't mention about the child's condition Since the child's overall status of health is continuously in unstable conditions, requiring her all-time readiness for an emergency, she feels guilty of her child's illness toward the fEmily members as if it was her own fault to have borne such an abnormal child and she feels responsible for the child morally and financially if necessary Because her life is centered on taking care of the child, she cannot afford to enjoy her own life and happiness. She is a lonely mother, fatigued, with no proper relationship with other people around her. With this sense of guilt and responsibility as a mother of an unusual disease, she has no choice but to grieve her destiny from which she is not allowed to escape. 3. Nevertheless, the mother with the child suffering from the cerebral palsy does not easily give up the hope of getting her child cured and she believes that in the long run, though slower than hoped, her abnormal son or daughter will be eventually cured to become a normal sibling someday. This kind of hope is sustained by the mother's strong faith coming from observing the progress of other similar children getting better. Sometimes she is encouraged to have this faith by other mothers who share the same painful experiences, believing that her child will improve even more rapidly than others with the same palsy. Full of hope, she painstakingly waits for the child's healing. Moreover, she plans to have another child. she thinks that the patient child's brothers and sisters only can truly understand and look after the patients. However, when she notices that the progress of other children under the treatment does not look so hopeful, she is distressed by the thoughts that her child may never get well. Too, she is worried that the patient's brother or sister will be born as the same invalid with the cerebral disease. She is discouraged to have another baby as much as she is encouraged to. She is also troubled by the thought that in case she has another baby, she will have to be forced. to neglect the patient child, especially when she does have an extra hand or some reliable person to help her with taking care of the patient.