• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.5
• /
• pp.265-273
• /
• 2002

With the explosive growth of WWW traffic, there is an increasing demand for the high performance Web servers to provide a stable Web service to users. The cluster-based Web server is a solution to core with the heavy access from users, easily scaling the server according to the loads. In the cluster-based Web sewer, a back-end node may not be able to serve some HTTP requests directly because it does not have the requested contents in its main memory. In this case, the back-end node has to retrieve the requested contents from its local disk or other back-end nodes in the cluster. To reduce service latency, we introduce a new prefetch scheme. The back-end nodes predict the next HTTP requests and prefetch the contents of predicted requests before the next requests arrive. We develop three prefetch algorithms bated on some useful information gathered from many clients'HTTP requests. Through trace-driven simulation, the service latency of the prefetch scheme is reduced by 10 ~ 25% as compared with no prefetch scheme. Among the proposed prefetch algorithms, Time and Access Probability-based Prefetch (TAP2) algorithm, which uses the access probability and the inter-reference time of Web object, shows the best performance.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.57-70
• /
• 2013

Purpose - The objective of this paper is to explain the successful methods for the revitalization of distribution and logistics of the least developed FEZs (Saemangum, Yellow-sea, and Deagu-Kyengbuk) in Korea. With the recent changes in the economic terrain of Northeast Asia as with the rise of China, Korea has developed a logistics hub concept for improving the efficiency of logistics and distribution industry and its distribution and logistics policy has received positive worldwide evaluation. Therefore, we face severe competition and must always look for ways to address these problems. Research design, Data, Methodology - This study adopts two methods to propose successful revitalization of distribution and logistics in the least developed FEZ. The first method investigates the limitation of these FEZs by analyzing the statutes, and the second one follows comparable cases. Thus, we first reviewed the efficient strategic political alternatives for the least developed FEZ, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk, through the relative institution system, law, and future plans. Next, we studied the Bin-hai Economic Free Section (Zone) in China as a comparable example. In order to analyze the competitiveness of logistics in the three FEZs (Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk), the total factor productivity growth of regional manufacturing industries is divided into three sources: the external trade effect, scale effect, and technical change effect. However, this paper does not test for a positive contribution of external trade, which is a reason of non-building on these FEZs. A FEZ that shows a larger external trade effect than the others will have a comparative advantage in the logistics infrastructure and policy support. This study presented the newly applied Bin-hai FEZ in China, in order to make the studied FEZ as successful by applying the strategy of its distribution and logistics center. Results - In Korea, there is an increased focus on the benefit of the regional development of regions such as the Free Economic Zones (FEZ). We have six FEZs, Inchon, Busan-Jinhae, Guangyang, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk. However, our FEZs do not have various supporting factors needed for the logistics and distribution industry. Korea designated the above six places as FEZ and has operated to enhance national competitiveness and ensure a balanced regional development since 2003. However, most FEZs did not receive favorable feedback in the first business performance evaluation and it is necessary to take action for substantial improvements. Conclusions - Especially, over the past 10 years, even though the FEZ policy has been implemented in an effort to promote success in distribution and logistics, there are still many underdeveloped industries in logistics. The main problem is the absence of revitalization of the high value added performance in the distribution and logistics industry. However, there is a limitation to this study. We have used non-empirical method based on a case study to arrive at our findings. Future studies should use appropriate statistical methods to supplement our results and provide a solution to this problem.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.259-265
• /
• 2006

Small intestinal submucosa (SIS) consists of some growth factors which can stimulate cell activity, and PVA has been widely utilized in the area of wound dressing as hydrogel which is easy to be removed from wounds. In this study, native SIS sheets were coated with PVA by immersing them into 2, 4, and 10 wt% of PVA solution and then lyophilized on two type of molds to endow the prepared wound dressing with easy removal property from wounds. The mechanical properties were examined through tensile test. Moreover, enzymatic degradation, water uptake, and in vitro test were carried out to characterize the prepared SIS sheets. The tensile strength of the SIS sheets coated with PVA (PVA-SIS) were decreased, whereas the elongation were increased. Degradation ratio of the PVA-SIS sheets was decreased compare to native SIS. Water uptake ability was improved at 2 and 4 wt% of PVA. The degree of fibroblast attachment was lower than the native SIS sheets. In conclusion, this study suggests that the PVA coated SIS sheets have a potential for the applications of wound dressing and biodegradable injectable materials.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.534-540
• /
• 2006

Thin films of $V_2O_3$, $VO_2$, and $V_2O_5$ were obtained from a single precursor solution through post-annealing processes under different annealing conditions. As annealed in air, the deposited films became $V_2O_5$ with orthorhombic crystal structure, while they were $V_2O_3$ and $VO_2$ with rhombohedral and monoclinic crystal structure as annealed in vacuums with base pressure of $1{\times}10^{-6}$ Torr and with 10 mTorr $O_2$ pressure, respectively. Electrical and optical measurements indicated that the $V_2O_5$ and $VO_2$ films are semiconducting, while the $V_2O_3$ films are metallic at room temperature. Chromium doping in $VO_2$ resulted in a decrease of the resistivity and changed the conduction type from n-type to p-type. 10% Cr-doped $VO_2$ films were found to have orthorhombic crystal structure, which is different from that of the undoped $VO_2$. Spectral features in the optical absorption spectra of all the films were interpreted as the transitions involving O 2p and V 3d bands. The crystal-field splittings between $t_{2g}$ and $e_g$ states of the V 3d bands are estimated to be about 1.5 and 1.0 eV for $V_2O_5$ and $VO_2$, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.46 no.2
• /
• pp.58-64
• /
• 2004

The current study was performed to clarify the pupation disorder symptoms in silkworm which herbicide, molinate has been regarded as a causal origin. Molinate residues in mulberry leaves was monitored in major rearing area of silkworm; Yeacheon, Sangju and Namwon. Detected range of the molinate in mulberry leaves was 0.002 to 0.013 mg/kg and detection frequency was 30.0 to 81.8%. Molinate concentration in the air of mulberry tree growing area was $0.004\;{\mu}g/m^3$. Water diluted solution of molinate at the concentration of 1, 10, 100 mg/l gave no abnormal symptoms in silkworm irrespective of spraying to silkworm or spiking to diet. Exposing the silkworm to the air containing 250, 2,500, and $10,000\;{\mu}g/m^3$ also revealed no abnormal symptom. These results illustrated that the abnormal growth of silkworm encountered in the field was not caused by pesticide contamination.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.93-99
• /
• 1996

By treatment(dropping) of 0.1~0.4% colchicine solution on the sprouts of winter buds of hard wood cutting slips for 4~5 days, two lines of artificial autotetraploids from Yongchonppong and one line from Yeongbyonppong were bred and the important cultivative characteristics of those new lines were as follows. The greentip sprouting stage of the new bred lines in spring season is later than the parental varieties by two days, but growth speed of the new lines after sprouting was faster than that of the parental varieties reaching the same level development with the parental varieties at the fifth leaf sprouting stage to be mid varieties same as the origins. The leaf shape of the new bred lines was wide round and the petioloes were long and thick. The thickness of leaf was thicker than the parental varieties by 17-33% and single leaf weight was heavy. The leaf area weight increased by 21-31% and the content of chlorophyll was also higher by 11-33%. With all the characteristics, the new breds produced good quality of leaves. The length and number of branches were shorter and less, respectively, than the parental varieties, but the internode length was either same or longer than the parents. Looking at the characteristics, the constitution of shoots was slightly inferior to the parental varieties. The cold hardness expressed by the death top rate of Sawonppong 23 and Sawonppong 24 was same level as that of Yongchonppong, but Sawonppong 25 was stronger than Yeongbyonppong in it with a high infection rate of dwarf disease. The productivity was lower than the parental varieties, but young shoot rate to shoot and branch and the ratio of leaf to young shoot were higher than the parental varieties. The fertility of Sawonppong 23 and Sawonppong 24 was comparatively high with 62% of cross success, but that of Sawonppong 25 was low with 23.9% of cross success.

• Applied Biological Chemistry
• /
• v.27 no.1
• /
• pp.40-44
• /
• 1984

Experiments on the GA production ability by ectomycorrhizal fungus, Pisolithus tinctorius was carried out to investigate specific physiological phenomena of growth increase in host plants by formation of mycorrhizae, The culture extract of P. tinctorius was purified by solvent fractionation, sephadex LH-20 chromatography, silica gel partition chromatography and TLC, successively. GA activities in the purified GA fractions were monitored by micro-drop bioassay using dwarf rice seedlings, 'Tan-ginbozu'. $30{\sim}60%$ EtOAc election fractions of silica gel pardon chromatography and the zone of Rf $0.1{\sim}0.4,\;0.6{\sim}0.8$ of TLC exhibited the GA-like activities. The GA activities were increased with the more treated amount of culture extracts. This activity in 100ml of culture solution was equivalent to 0.1ng of $GA_3$.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• Journal of Radiation Protection and Research
• /
• v.23 no.4
• /
• pp.219-227
• /
• 1998

A solution containing $^{85}Sr$, $^{103}Ru$ and $^{134}Cs$ was applied to Chinese cabbage in a greenhouse via foliar spraying at 5 different times during its growth. Interception of the applied activity by plant showed no difference among radionuclides and increased with decreasing time interval between application and harvest. The maximum interception factor observed was 0.87. Percentages of the intercepted activity remaining in the whole leaves at harvest varied $16{\sim}58%$ for $^{85}Sr$, $15{\sim}73%$ for $^{103}Ru$ and $33{\sim}64%$ for $^{134}Cs$, with application time and those for the inner leaves (without 6 outmost leaves) varied $2{\sim}35%$, $0.4{\sim}46%$ and $14{\sim}40%$, respectively. It was demonstrated that rain plays an important role in weathering loss of the activity. Tying the upper end of the plant prior to the last application lowered interception and remaining activity in the inner leaves by factors of $3{\sim}4$. Present results can be referred to in predicting the radionuclide concentration in Chinese cabbage and deciding counter-measures at the time of an accidental release from the nuclear installation.

• KDI Journal of Economic Policy
• /
• v.12 no.4
• /
• pp.3-20
• /
• 1990

The multisector model is designed to analyze and forecast structural change in industrial output, employment, capital and relative price as well as macroeconomic change in aggregate income, interest rate, etc. This model has 25 industrial sectors, containing about 1,300 equations. Therefore, this model is characterized by detailed structural disaggregation at the sectoral level. Individual industries are based on many of the economic relationships in the model. This is what distinguishes a multisector model from a macroeconomic model. Each industry is a behavioral agent in the model for industrial investment, employment, prices, wages, and intermediate demand. The strength of the model lies in the simulating the interactions between different industries. The result of its simulation will be introduced in the next paper. In this paper, we only introduce the structure of the multisector model and the coefficients of the equations. The multisector model is a dynamic model-that is, it solves year by year into the future using its own solutions for earlier years. The development of a dynamic, year-by-year solution allows us to combine the change in structure with a consideration of the dynamic adjustment required. These dynamics have obvious advantages in the use of the multisector model for industrial planning. The multisector model is a medium-term and long-term model. Whereas a short-term model can taken the labor supply and capital stock as given, a long-term model must acknowledge that these are determined endogenously. Changes in the medium-term can be analyzed in the context of long-term structural changes. The structure of this model can be summarized as follow. The difference in domestic and world prices affects industrial structure and the pattern of international trade; domestic output and factor price affect factor demand; factor demand and factor price affect industrial income; industrial income and relative price affect industrial consumption. Technical progress, as measured in terms of total factor productivity and relative price affect input-output coefficients; input-output coefficients and relative price determine the industrial input cost; input cost and import price determine domestic price. The differences in productivity and wage growth among different industries affect the relative price.