• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.111-116
• /
• 2001

As part of the recycling methods, residual food through the anaerobic fermentation process was decomposed into methane gas and fermentation liquid. The research was conducted to measure the effect of application of fermentation liquid on chemical properties of soil and plant growth according to application rate and separate manure at the base of nitrogen in fermentation liquid. The fermentation liquid contained 0.52% nitrogen was applied in treatments by standard fertilizer. The treatments were composed of the control only with chemical fertilizer and N-50, N-100-4, N-100-8 were each of applied with 50, 100(6 times), 100(3 times)% of fermentation liquid contrast to standard fertilizer. Properties of fermentation liquid was high EC because of waster soluble organic compounds as well as much of salts and also contained a lot of suspended solid. The changes of soil chemical properties little occurred in before and after of experiment but EC and content of ex. Ca in soil were increased. Fresh weigh in treatments applied with fermentation is high than that of control but the difference between treatments little showed. The above result means if fermentation liquid be used instead of chemical fertilizer the volume of used fermentation liquid will be reduced by 50% of present standard fertilizer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.2
• /
• pp.211-218
• /
• 2016

This study evaluated the effect of Candida norvegensis (C. norvegensis) viable yeast culture on in vitro ruminal fermentation of oat straw. Ruminal fluid was mixed with buffer solution (1:2) and anaerobically incubated with or without yeast at $39^{\circ}C$ for 0, 4, 8, 16, and 24 h. A fully randomized design was used. There was a decrease in lactic acid (quadratic, p = 0.01), pH, (quadratic, p = 0.02), and yeasts counts (linear, p<0.01) across fermentation times. However, in vitro dry matter disappearance (IVDMD) and ammonia-N increased across fermentation times (quadratic; p<0.01 and p<0.02, respectively). Addition of yeast cells caused a decrease in pH values compared over all fermentation times (p<0.01), and lactic acid decreased at 12 h (p = 0.05). Meanwhile, yeast counts increased (p = 0.01) at 12 h. C. norvegensis increased ammonia-N at 4, 8, 12, and 24 h (p<0.01), and IVDMD of oat straw increased at 8, 12, and 24 h (p<0.01) of fermentation. Yeast cells increased acetate (p<0.01), propionate (p<0.03), and butyrate (p<0.03) at 8 h, while valeriate and isovaleriate increased at 8, 12, and 24 h (p<0.01). The yeast did not affect cellulolytic bacteria (p = 0.05), but cellulolytic fungi increased at 4 and 8 h (p<0.01), whereas production of methane decreased (p<0.01) at 8 h. It is concluded that addition of C. norvegensis to in vitro oat straw fermentation increased ruminal fermentation parameters as well as microbial growth with reduction of methane production. Additionally, yeast inoculum also improved IVDMD.

• Reproductive and Developmental Biology
• /
• v.29 no.2
• /
• pp.127-131
• /
• 2005

The objective of this study was to examine the effect of EGF on meiotic maturation and pronuclear (PN) formation of porcine oocytes. Prepubertal gilt cumulus-oocyte-complexes (COCs) aspirated from $2\~6mm$ follicles of abbatoir ovaries were matured in TCM199 containing 0.1mg/ml cysteine, $0.5{\mu}/ml$ FSH and LH, and EGF (0, 5, 10, 20, 40 ng/ml) for 22 hr at $39^{\circ}C$ in a humidified atmosphere of $5\%$ $CO_2$ in air. They were then cultured for an additional 22hr without hormones. In Experiment 1, to examine the nuclear maturation at 44hr of culture, the expanded cumulus cells were removed by vortexing for 1 min in 3 mg/ml hyaluronidase. The oocytes were fixed in acetic acid: methanol (1:3, v/v) at least for 48 hr and stained with $1\%$ orcein solution for 5 min. Nuclear status was classified as germinal vesicle (GV), germinal vesicle breakdown (GVBD), prophase-metaphase I (PI-MI), and PII-MII under microscope. In Experiment 2, to investigate PN formation, oocytes were fertilized with Percoll-treated freshly ejaculated sperm $(1\times10^5\; cells/ml)$ in mTBM with $0.3\%$ BSA and 2mM caffeine for 5hr, and cultured in NCSU-23 medium with $0.4\%$ BSA. At 6hr of culture, the embryos were fixed in $3.7\%$ formaldehyde for 48hr and stained with 10ug/ml propidium iodide for 30 min. PN status was classified as no or one PN (unfertilized), 2 PN (normal fertilized) and $\geq3$ PN (polyspermy). Differences between groups were analyzed using one-way ANOVA after arc-sine transformation of the proportional data. The rate of oocytes that had reached to PII-MII were significantly (P<0.05) higher in all groups added EGF than that of non-treated group $(67\%)$, but it did not differ among the all added groups $(86\%,\;85\%,\;79\%\;and\;81\%$, in 5, 10, 20 and 40 ng/ml EGF, respectively). No differences on the incidence of 2PN were observed in all treated groups $(25\%,\;30\%,\;33\%,\;29\%\;and\;29\%$, in 0, 5, 10, 20 and 40 ng/ml EGF, respectively), however, in non-treated group, polyspermy tended to be increased ($66\%\;vs\;. 58\%,\;54\%,\;52\%\;and\;55\%$, 0 vs. 5, 10, 20, 40 ng/ml EGF, respectively). These results suggest that EGF can be effectively used as an additive for enhancing oocyte maturation and reducing the incidence of polyspermy in pig.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.180-185
• /
• 2007

The effects of selenium (Se) and germanium (Ge) fertilization on the growth and quality of Chinese cabbages cultivated in spring and autumn and peppers cultivated in spring were investigated. $Se\;(Na_2SeO_4)\;and\;Ge\;(GeO_2)$ were supplied 5, 10, or 20 times in an aqueous solution of 0, 2, 4, or $8mg{\cdot}L^{-1}$ during the cultivation of Chinese cabbages and peppers. The fresh weight of Chinese cabbages increased by Ge fertilization with high concentration. But it was not affected by Se fertilization. The content of vitamin C increased by 10 times application with $4mg{\cdot}L^{-1}$ of Se or Ge. The concentration of Se in Chinese cabbage increased according to increasing concentration of Se fertilization. Se concentration was higher in the outer leaves than in the inner leaves. Se concentration in the mesophyll was higher than that in the midrib. Ge fertilization increased the uptake and concentration of Ge in autumn-cultivated Chinese cabbages. Se and Ge fertilization did not affect the fresh weight of peppers. The content of vitamin C in pepper increased by 20 times application of $2mg{\cdot}L^{-1}$ of Se. Vitamin C content in red peppers was twice as much as in green peppers.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Journal of Distribution Science
• /
• v.18 no.5
• /
• pp.89-98
• /
• 2020

Purpose: The growth of online commerce is now becoming a major threat and a new opportunity for retailers. Existing offline retailers struggle to cope with new online retailers' threats by utilizing offline infrastructure. Besides, online retailers expand their online strengths to offline sales by opening their offline stores. Many retailers are paying close attention to the O2O business and the resulting changes. Thus, this research focuses on the O2O business model and process that retailers can adopt. Research design, data and methodology: Considering the features of products that retailers sell, this paper divides O2O business process with the following criteria: delivery lead-time and delivery area. And This research uses the business model canvas to define the features of O2O commerce business process. This paper also uses nine key elements in the business model canvas for analyzing the structure of O2O commerce business. Results: This paper suggests the delivery model of retailers respond to offline customer orders and summarizes the following results. (1) Considering characteristics such as logistics process, delivery area, and product type, we define the features of O2O business models: wide-area (warehouse) based O2O business model, regional area (store) based O2O business model and time-separated O2O business model. (2) This study checks the availability of the business model through the business cases of O2O business models. (3) This study also analyzes the O2O business model of domestic retail companies by the factors defined in the business model canvas. Conclusions: Retailers can adopt the O2O business process to fit their business requirements and strategy. The online retailers who deal with normal consumer products mainly have the wide-area based O2O business model. The wide-area based O2O business model can be suitable for retailers who manage inventory centrally. The time-separated O2O business model can be a good solution for fresh food retailers to operate the logistics process efficiently. And to shorten the delivery lead-time of fresh foods, the regional area based O2O business model can be fit to the retailer that utilizes its offline logistics or sales infrastructure. It may be much more important for retailers to share the inventory information with other branches and to change the role of offline stores.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.5
• /
• pp.265-273
• /
• 2002

With the explosive growth of WWW traffic, there is an increasing demand for the high performance Web servers to provide a stable Web service to users. The cluster-based Web server is a solution to core with the heavy access from users, easily scaling the server according to the loads. In the cluster-based Web sewer, a back-end node may not be able to serve some HTTP requests directly because it does not have the requested contents in its main memory. In this case, the back-end node has to retrieve the requested contents from its local disk or other back-end nodes in the cluster. To reduce service latency, we introduce a new prefetch scheme. The back-end nodes predict the next HTTP requests and prefetch the contents of predicted requests before the next requests arrive. We develop three prefetch algorithms bated on some useful information gathered from many clients'HTTP requests. Through trace-driven simulation, the service latency of the prefetch scheme is reduced by 10 ~ 25% as compared with no prefetch scheme. Among the proposed prefetch algorithms, Time and Access Probability-based Prefetch (TAP2) algorithm, which uses the access probability and the inter-reference time of Web object, shows the best performance.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.57-70
• /
• 2013

Purpose - The objective of this paper is to explain the successful methods for the revitalization of distribution and logistics of the least developed FEZs (Saemangum, Yellow-sea, and Deagu-Kyengbuk) in Korea. With the recent changes in the economic terrain of Northeast Asia as with the rise of China, Korea has developed a logistics hub concept for improving the efficiency of logistics and distribution industry and its distribution and logistics policy has received positive worldwide evaluation. Therefore, we face severe competition and must always look for ways to address these problems. Research design, Data, Methodology - This study adopts two methods to propose successful revitalization of distribution and logistics in the least developed FEZ. The first method investigates the limitation of these FEZs by analyzing the statutes, and the second one follows comparable cases. Thus, we first reviewed the efficient strategic political alternatives for the least developed FEZ, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk, through the relative institution system, law, and future plans. Next, we studied the Bin-hai Economic Free Section (Zone) in China as a comparable example. In order to analyze the competitiveness of logistics in the three FEZs (Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk), the total factor productivity growth of regional manufacturing industries is divided into three sources: the external trade effect, scale effect, and technical change effect. However, this paper does not test for a positive contribution of external trade, which is a reason of non-building on these FEZs. A FEZ that shows a larger external trade effect than the others will have a comparative advantage in the logistics infrastructure and policy support. This study presented the newly applied Bin-hai FEZ in China, in order to make the studied FEZ as successful by applying the strategy of its distribution and logistics center. Results - In Korea, there is an increased focus on the benefit of the regional development of regions such as the Free Economic Zones (FEZ). We have six FEZs, Inchon, Busan-Jinhae, Guangyang, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk. However, our FEZs do not have various supporting factors needed for the logistics and distribution industry. Korea designated the above six places as FEZ and has operated to enhance national competitiveness and ensure a balanced regional development since 2003. However, most FEZs did not receive favorable feedback in the first business performance evaluation and it is necessary to take action for substantial improvements. Conclusions - Especially, over the past 10 years, even though the FEZ policy has been implemented in an effort to promote success in distribution and logistics, there are still many underdeveloped industries in logistics. The main problem is the absence of revitalization of the high value added performance in the distribution and logistics industry. However, there is a limitation to this study. We have used non-empirical method based on a case study to arrive at our findings. Future studies should use appropriate statistical methods to supplement our results and provide a solution to this problem.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.259-265
• /
• 2006

Small intestinal submucosa (SIS) consists of some growth factors which can stimulate cell activity, and PVA has been widely utilized in the area of wound dressing as hydrogel which is easy to be removed from wounds. In this study, native SIS sheets were coated with PVA by immersing them into 2, 4, and 10 wt% of PVA solution and then lyophilized on two type of molds to endow the prepared wound dressing with easy removal property from wounds. The mechanical properties were examined through tensile test. Moreover, enzymatic degradation, water uptake, and in vitro test were carried out to characterize the prepared SIS sheets. The tensile strength of the SIS sheets coated with PVA (PVA-SIS) were decreased, whereas the elongation were increased. Degradation ratio of the PVA-SIS sheets was decreased compare to native SIS. Water uptake ability was improved at 2 and 4 wt% of PVA. The degree of fibroblast attachment was lower than the native SIS sheets. In conclusion, this study suggests that the PVA coated SIS sheets have a potential for the applications of wound dressing and biodegradable injectable materials.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.534-540
• /
• 2006

Thin films of $V_2O_3$, $VO_2$, and $V_2O_5$ were obtained from a single precursor solution through post-annealing processes under different annealing conditions. As annealed in air, the deposited films became $V_2O_5$ with orthorhombic crystal structure, while they were $V_2O_3$ and $VO_2$ with rhombohedral and monoclinic crystal structure as annealed in vacuums with base pressure of $1{\times}10^{-6}$ Torr and with 10 mTorr $O_2$ pressure, respectively. Electrical and optical measurements indicated that the $V_2O_5$ and $VO_2$ films are semiconducting, while the $V_2O_3$ films are metallic at room temperature. Chromium doping in $VO_2$ resulted in a decrease of the resistivity and changed the conduction type from n-type to p-type. 10% Cr-doped $VO_2$ films were found to have orthorhombic crystal structure, which is different from that of the undoped $VO_2$. Spectral features in the optical absorption spectra of all the films were interpreted as the transitions involving O 2p and V 3d bands. The crystal-field splittings between $t_{2g}$ and $e_g$ states of the V 3d bands are estimated to be about 1.5 and 1.0 eV for $V_2O_5$ and $VO_2$, respectively.