• East Asian mathematical journal
• /
• v.35 no.1
• /
• pp.91-98
• /
• 2019

This paper is concerned with the global existence of strong solution for the controlled ode-pde systems. Also, we consider the continuous dependence of solution on the control.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.347-348
• /
• 2018

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.397-398
• /
• 2018

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.759-770
• /
• 1985

This study was experimentally undertaken to evaluate the effect of hypothermic oxygenated cardioplegic solution on myocardial protection during prolonged aortic cross clamping under cardiopulmonary bypass. Dogs were divided into two groups control group [received hypothermic unoxygenated cardioplegic solution] and experimental group [received hypothermic oxygenated cardioplegic solution]. Coronary sinus effluent was obtained at once and 30, 60, 90 minutes after cross-clamping for the determination of pH, PCO2,PO2 and lactate level during the infusion of cardioplegic solution and myocardial biopsies were obtained after cessation of 90 minutes of aortic cross-clamping. The results obtained were as follows: 1. There was no significant differences in the pH and PCO2 between the oxygenated and unoxygenated cardioplegic solution but the PO2 of the oxygenated solution was 4 times greater than unoxygenated solution, and also the oxygenated solution had a significantly greater oxygen content [2.020.05 ml 02/min] and had much more oxygen delivery than unoxygenated solution. 2. The myocardial oxygen consumption and the myocardial oxygen extraction in oxygenated group were 1.63 ml 02/100 ml and 67.32% respectively, which was greater than those in unoxygenated group. 3. Regarding to pH and PCO2 of coronary sinus effluent, there was no significant differences between two groups in early period of infusion of cardioplegic solution, but the pH shifted to acidosis from 60 minutes, PCO2 increased from 90 minutes of aortic cross-clamping, and PO2 markedly decreased from 90 minutes of aortic cross-clamping in unoxygenated group. 4. The lactate concentration of coronary sinus effluent revealed relatively normal in both groups, but showed slight increase up to 27.54.56 mg/100 ml at 90 minutes of aortic cross-clamping in unoxygenated group. 5. On electron microscopic study, the ultrastructural integrity of myocardial cells in oxygenated group was well preserved within 90 minutes. Slight swelling and deformity of mitochondria, interfibrillar widening, and disarrangement of myofibrils were observed at 90 minutes after aortic cross-clamping in unoxygenated group. From these results, the use of hypothermic oxygenated cardioplegic solution seemed to be effective and better method for the preservation of ischemic myocardium during the prolonged aortic cross-clamping.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.466-471
• /
• 2014

Hydrous zirconia particles were prepared from $ZrOCl_2$ aqueous solution using an electro-dialysis [ED] process. For the preparation of $(Zr,Y)(OH)_4$ precipitates, 3 mol% $YCl_3$ was added into $ZrOCl_2$ aqueous solution. During the hydrolysis of 0.5 mol/L $(Zr,Y)OCl_2$ solution at $90^{\circ}C$ a slurry solution was obtained. The ED process was used for the removal of chlorine from the slurry solution. Two kinds of slurry solution were sampled at the beginning and end of the ED process. The morphology of hydrous zirconia particles in the solution was observed using an inverted optical microscope and an FE-SEM. The hydrous zirconia particles were nano-crystalline, and easily coagulated with drying. Yttrium stabilized zirconia [YSZ] powder could be obtained by the calcination of $(Zr,Y)(OH)_4$ precipitates prepared from a $(Zr,Y)OCl_2$ solution by the ED process. The coagulated dry powders were shaped and sintered at $1500^{\circ}C$ for 2 h. The sintered body showed a dense microstructure with uniform grain morphology.

• Journal of the Korean Ceramic Society
• /
• v.53 no.3
• /
• pp.325-331
• /
• 2016

Anatase particles of titanium dioxide were prepared from $TiCl_4$ aqueous solution by using an electro-dialysis [ED] process. For the preparation of an aqueous solution of $TiCl_4$ precipitates, $TiCl_4$ liquid frozen in ice was transferred to a neck flask and then hydrolyzed using deionized [DI] $H_2O$. During the hydrolysis of the $TiCl_4$ solution at $0^{\circ}C$, a slurry solution of $TiOCl_2$ was obtained and the color changed from red to orange. The ED process was applied for the removal of chlorine content in the slurry solution. Two kinds of hydrolyzed slurry solution with lower [$Ti^{4+}$] and higher [$Ti^{4+}$] were sampled and the ED process was applied for the samples according to the removal time of [$Cl^-$]. With de-chlorination, the solution status changed from sol to gel and the color quickly changed to blue. Finally, white crystalline powders were formed and the phase was confirmed by XRD to be anatase crystallites. The morphology of the hydrous titania particles in the solution was observed by FE-SEM. The hydrous titania particles were nano-crystalline, and easily coagulated with drying.

• Journal of Bio-Environment Control
• /
• v.7 no.2
• /
• pp.123-129
• /
• 1998

This experiment was conducted to composition of nutrient solution for tore of endive hydroponics, and was compared the nutrient solution developed in the Seoul City University(SCUE) with the conventional solution of Proefstation voor Tuinbouw ender Glas. Proper compositions of nutrient solution for endive hydroponics were NO$_3$-N 15.0, NH$_4$-N 1.0, PO$_4$-P 3.0. K 10.0, Ca 5.0 and Mg 3.5 me.$\ell$$^{-1}$ , respectively SCUE and PTG standard nutrient solution showed slightly better yields among nutrient solutions. The SCUE nutrient solution and the PTG nutrient solution had no difference on growth and yield of endive Plants.

• Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.174-180
• /
• 2005

Nano-sized iron was synthesized using borohydride reduction of $Fe^{3+}$ in aqueous solution. A wide range of synthesis conditions including varying concentrations of reagents, reagent feeding rate, and solution pH was applied in an aqueous system under anaerobic condition. The reactivity of nano-sized iron from each synthesis was evaluated by reacting the iron with TCE in batch systems. Evidence obtained from this study suggest the reactivity of iron is strongly dependent on the synthesis solution pH. The iron reactivity increased as solution pH decreased. More rapid TCE reduction was observed for iron samples synthesized from higher initial $Fe^{3+}$ concentration, which resulted in lower solution pH during the synthesis reaction. Faster feeding of $BH_4^-$ solution to the $Fe^{3+}$ solution resulted in lower synthesis solution pH and the resultant iron samples gave higher TCE reduction rate. Lowering the pH of the solution after completion of the synthesis reaction significantly increased reactivity of iron. It is presumed that the increase in the reactivity of iron synthesized at lower pH is due to less precipitation of iron (hydr)oxides or less surface passivation of iron.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.4
• /
• pp.165-172
• /
• 2013

In the present study, the microstructure and solution treatment response of Al-Zn-Mg alloys bars by thixo-extrusion was investigated. The alloy bars were solution treated at 400, 430, 460 and $490^{\circ}C$ for various times. In order to examine the microstructures and phase analysis of the samples after solution treatment, it was performed by optical and scanning electron microscopy. And, Vickers hardness and electrical conductivity was measured on the solution treated samples for each condition to investigate the solution treatment response of extruded bars during solution treatment. The results show that the optimum solution heat treatment conditions of thixo-extruded Al-Zn-Mg alloy for minimization of the grain growth and degradation promotion of the second phase is a temperature of $460^{\circ}C$ and holding time of 0.5 to 2 h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.35-36
• /
• 2006

The influence of the concentration of precursor solution and the number of solution coatings on the densification of the Pb($Zr_xTi_{1-x}$)$O_3$(PZT) thick films was studied. PZT powder and PZT precursor solution were prepared by sol-gel method and PZT thick films were fabricated by the screen-printing method on the alumina substrates. The powder and solution of composition were PZT(70/30) and PZT(30/70), respectively. The coating and drying procedure was repeated 4 times. And then the PZT precursor solution was spin-coated on the PZT thick films. A concentration of a coating solution was 0.5 to 2.0 mol/L[M] and the number of coating was repeated from 0 to 6. The relative dielectric constant of the PZT thick film was increased with increasing the number of solution coatings and the thick films with 15M, 6-time coated showed the 698. The remanent polarization of the 1.5M, 6-time coated PZT thick films was 38.3 ${\mu}C/cm^2$.