• KSBB Journal
• /
• 제18권6호
• /
• pp.500-505
• /
• 2003

재조합 대장균에서 내포체 형태로 발현시킨 LK68을 생물학적 활성을 가진 native한 단백질로 재생시키기 위해서 PBA 크로마토그래피와 EBA 크로마토그래피를 이용한 고체상 재접힘을 수행하였다. 내포체와 세포파쇄액을 시작물질로 하여 재접힘 공정을 수행하였으며 총 단백질 회수율과 재접힘 수율을 비교한 결과, EBA 공정이 기존의 액상 재접힘이나 PBA를 이용한 재접힘 공정에 비하여 우수함을 확인하였다. 또한 Iysine binding, RP-HPLC, SEC-HPLC, Ellman method 등을 사용하여 분석한 결과 재접힘된 LK68이 native LK68와 동등함을 확인하였다. 본 연구를 통해 EBA 크로마토그래피를 이용한 재접힘 방법은 재접힘 단계의 수율을 향상시킬 뿐 아니라 공정 단계, 시간 등을 감소시켜 공정 성능을 전체적으로 향상시킬 수 있음을 제시하였다.

• 한국연초학회지
• /
• 제35권1호
• /
• pp.7-12
• /
• 2013

A Solid-phase micro extraction(SPME) was evaluated as a tool for headspace sampling of tobacco samples. Several experimental parameters (sampling temperature, pH, and type of SPME fibers) were optimized to improve sampling efficiency in two aspects ; maximum adsorption and selective adsorption of volatile organic acids onto SPME fibers. Among four types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate), Car/PDMS (Carboxen/Polydimethylsiioxane) and PDMS/DVB(Polydimethylsiioxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency. A variety of tobacco samples such as flue cured, burley and oriental were used in this study. The effect of these parameters was often dominated by the physical and chemical nature (volatility, polarity) of target compounds. This method allowed us to make important improvements in selectivity and sensitivity. The Car/PDMS fiber was shown to be the most efficient at extracting the 10 selected volatile organic acids. The parameters were optimized: $80^{\circ}C$ adsorption temperature, 30 min of adsorption time, $240^{\circ}C$ desorption temperature, 1 min of adsorption time.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2353-2357
• /
• 2013

The objective of this study was to develop a simple, less time-consuming and accurate sampling technique based on solid-phase sorption with activated carbon as the sorbents. The results from solid-phase sorption techniques were compared to that from a conventional solvent impinger-based technique to confirm the efficacy of the proposed method. The laboratory results indicated that the solid-phase sorption method was suitable for the determination of siloxanes as the measured concentrations were similar to that from a solvent impinge method. The data from solid-phase sorption method showed excellent recovery and reproducibility while the sampling was less labor intensive and less time consuming than the solvent impinge method. Following the laboratory tests, the solid-phase sorption technique was successfully applied to sampling biogas from a field site. This study shows that the activated carbon-based solid-phase sorption can be a reliable and less time-consuming option for the sampling and collection of siloxanes under various different landfill conditions.

• KSBB Journal
• /
• 제16권2호
• /
• pp.146-152
• /
• 2001

rhGH-GST 융합단백질을 사용하여 재조합 대장균 세포 파쇄액으로부터 직접적으로 내포체의 solid-phase 재접힘을 수행할 수 있는 새로운 공정을 개발하였다. 그것은 고체 업자를 제거하는 동시에 초기에 목적딴백질을 흡착 포집할 수 있 는 expanded bed adsorption 크로마토그래피의 장점을 이용한 것이다. 세포 파쇄액 내 용해훤 내포체로부터의 풀린 융합단백질은 expanded bed adsorption 원리에 의해 STREAMLINE DEAE resin에 흡착되고 세포 찌꺼기 등 고체 입자물들은 위 방향 흐름에 의해 효과적으로 제거된다. Urea를 접차적으로 제거함으로써 융합단백질은 고체 matrix 표면에서 재접힘 된 후 염 놓도 구배에 의해 용출된다. 이 새로운 EBA-mediat$\xi$d 재접힘 방법은 응집현상을 획기적으로 줄이고 공정수율윤 향상시킬 뿐 아나라 공정단계 수를 줄일 수 있다. 이 공정은 우리가 알고 있는 한 세계에서 최초로 개발된 공정이며, 현재 single-chain polypeptide, affinity-tagged protein 등과 갈은 다른 행태의 단백질에 EBA를 사용한 재접힘 공정올 적용시키가 위한 연구가 진행되고 있다.

• Bulletin of the Korean Chemical Society
• /
• 제3권2호
• /
• pp.37-44
• /
• 1982

In this work we have studied the multilayer stepwise adsorption of gases on solid adsorbents based on the previously developed theory. It is shown that stepwise adsorption isotherms emerge from our theory if an ad hoc adsorption regarding the degree of occupation for each successive layer is abolished and the effect of lateral intermolecular interactions among adsorbate molecules is included. In addition to these the effect of vertical interactions has also been taken into consideration. It seems that the vertical interaction plays a role in deciding the shape and the position of steps in resulting isotherms. It is evident from this research that it is the lateral interaction that is responsible for stepwise adsorption as long as the adsorbent surface is uniform and temperature is sufficiently low.

• 약학회지
• /
• 제36권6호
• /
• pp.563-569
• /
• 1992

The sorption and desorption properties of four different solid adsorbents were evaluated for the trace enrichment of ibuprofen from biological samples. Chromosorb 107 gave the highest dynamic adsorption coefficient. Among the organic solvents examined, acetone gave the highest desorption coefficient. Using the Chromosorb 107 column, the optimum elution volume of the eluting solvent was evaluated from the breakthrough curve of ibuprofen. The usefulness of Chromosorb 107 as the solid adsorbent and acetone as the eluting solvent was examined for the solid-phase extraction of ibuprofen from serum in the concentration range of $20{\sim}40\;{\mu}g/ml$.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.135-138
• /
• 2003

Based on solid phase extraction, gas chromatography and mass spectrometry procedure for determining phenol and its derivatives in natural water was presented. In solid phase extraction, three types of techniques using solid phase adsorption material were treated with acid and salt, and converted second portion of acetyl derivatives. Under the these condition, extraction efficiency and detection ability dependent on extraction methods were discussed. Obtained results using optimized solid phase extraction techniques showed more convenience, simplifier and lower cost than the conventional analytical methods with holding wide dynamic range and lower detection limits.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.76-83
• /
• 1999

Solid phase microextraction (SPME) was used for the determination of 6 standard solvents (methanol, isopropanol, methyl ethyl ketone, ethyl acetate, cyclohexane, toluene) in food packaging materials. SPME method is a solvent-free sample preparation technique in which a fused silica fiber coated with polymeric organic liquid is introduced into the headspace above the sample. SPME method using fiber coated polydimethylisiloxane (PDMS) was compared with static headspace (SHS) method used as a reference. It was found that the optimal adsorption condition using PDMS-SPME method was 2$0^{\circ}C$ for 15 minutes for the standard solvents. Detection limits, linearity, reproducibility and recovery of both SHS and PDMS-SPME methods have been determined using 6 standard solvents. Both methods were characterized by high reproducibility and good linearity. Using SHS methods, the mean recovery of the 6 standard solvents was ranged from 75.5% to 105.8% with a mean relative standard deviation (RSD) of 0.3% to 4.8%. With PDMS-SPME method, the mean recovery of the 6 standard solvents was ranged from 86.7% to 108.3% with a mean RSD of 0.4% to 2.5%. The detection limits of both methods were the same for toluene, cyclohexane and methyl ethyl ketone; those of PDMS-SPME method were higher than those of SHS method for methanol, isopropanol and ethyl acetate. PDMS-SPME fiber shoed excellent adsorption for non-polar solvents such as toluene, while it showed relatively low adsorption for polar solvents such as methanol.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권6호
• /
• pp.419-425
• /
• 2001

A dense pellicular solid matrix has been fabricated by coating 4% agarose gel on to dense zironia-silica(ZS) spheres by watr-in-oil emulsification . The agarose evenly laminated the ZS bead to a depth of 30㎛, and the resultin gpellicular assembly was characterised by densities up to 2.39g/mL and a mean particle dimeter of 136 ㎛. In comparative fluidisation tests, the pellicular solid phase exhibited a two-fold greater flow velocity than commercial benchmark ad-sorbents necessary to achieve common values of bed expansion. Furthermore, the perlicular parti-cles were characterised by improved qualities of chromatographic behaviour, particularly with re-spect to a three-fold increase in the apparent effective diffusivity of lysozyme within a pellicular assembly modified with Cibacron Blue 3GA. The properties of rapid protein adsorption/desorp-tion were attributed to the physical design and pellicular deployment of the reactive surface in the solid phase. When combined with enhanced feedstock throughput, such practical advantages recommend the pellicular assembly as a base matrix for the selective recovery of protein products from complex, particulate feedstocks(whole fermentation broths, cell disruptates and biological extracts).

• Advances in materials Research
• /
• 제9권4호
• /
• pp.251-263
• /
• 2020

α-mangostin imprinted polymers have been synthesized by a non-covalent imprinting approach with α-mangostin as a template molecule. The α-mangostin molecularly imprinted polymers (MIPs) prepared by radical polymerization using methacrylic acid, ethlylene glycol dimethacrylate, benzoyl peroxide, and acetonitrile, as a monomer, crosslinker, initiator, and porogen, respectively. The template was removed by using methanol:acetic acid 90:10 (v/v). The physical characteristics of the polymers were investigated by Fourier Transform Infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The rebinding studies were carried out by batch methods. The results exhibited that the MIPs was able to adsorb the α-mangostin at pH 2 and the contact time of 180 min. The kinetic adsorption data of α-mangostin performed the pseudo-second order model and followed the Langmuir isotherm model with the adsorption capacity of 16.19 mg·g-1. MIPs applied as a sorbent material in solid-phase extraction, namely molecularly imprinted solid-phase extraction (MISPE) and it shows the ability for enrichment and clean-up of α-mangostin from the complex matrix in medicinal herbal product and crude extract of mangosteen (Garcinia mangostana L.) pericarp. Both samples, respectively, which were spiked with α-mangostin gives recovery more than 90% after through by MISPE in all concentration ranges.