• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.157-163
• /
• 2010

고체산화물연료전지는 세라믹 물질로 이루어지며, 세라믹 물질의 물성치는 작동조건에 따라 달라진다. 따라서, 높은 신뢰성을 가지는 시뮬레이션 모델을 개발하기 위해서는 세라믹 물질의 물성치를 정확하게 예측할 수 있어야한다. 본 논문에서는 고체산화물연료전지의 성능에 영향을 미치는 여러가지 물성치를 선택하고 그 물성치를 위한 시뮬레이션 모델이 개발되었다. 개회로전압을 위한 깁스에너지, 활성화손실을 위한 교환전류밀도, 저항손실을 위한 전기전도도가 계산되었다. 또한, 다공성 전극 내부의 물질전달 해석을 위해서 분자확산과 누센확산을 함께 고려하는 유효확산계수가 계산되었다. 이러한 계산과정 후에 물성치 모델과 전기화학반응 모델이 동시에 시뮬레이션 되었다. 해석코드의 검증을 위해서 전산해석 결과는 실험결과 및 Chan 등에 의해서 수행된 이전 연구결과와 비교되었다.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권2호
• /
• pp.98-111
• /
• 2008

This review introduces advances in clinical and pre-clinical single photon emission computed tomography (SPECT) and positron emission tomography (PET) providing noninvasive functional images of biological processes. Development of new collimation techniques such as multi-pinhole and slit-slat collimators permits the improvement of system spatial resolution and sensitivity of SPECT. Application specific SPECT systems using smaller and compact solid-state detector have been customized for myocardial perfusion imaging with higher performance. Combined SPECT/CT providing improved diagnostic and functional capabilities has been introduced. Advances in PET and CT instrumentation have been incorporated in the PET/CT design that provide the metabolic information from PET superimposed on the anatomic information from CT. Improvements in the sensitivity of PET have achieved by the fully 3D acquisition with no septa and the extension of axial field-of-view. With the development of faster scintillation crystals and electronics, time-of-flight (TOF) PET is now commercially available allowing the increase in the signal-to-noise ratio by incorporation of TOF information into the PET reconstruction process. Hybrid PET/SPECT/CT systems has become commercially available for molecular imaging in small animal models. The pre-clinical systems have improved spatial resolution using depth-of-interaction measurement and new collimators. The recent works on solid state detector and dual modality nuclear medicine instrumentations incorporating MRI and optical imagers will also be discussed.

• 한국멀티미디어학회논문지
• /
• 제11권12호
• /
• pp.1658-1667
• /
• 2008

Reconstruction of 3D objects from a single view image is generally an ill-posed problem because of the projection distortion. A monocular vision based 3D object localization method is proposed in this paper, which approximates an object on the ground to a simple bounding solid and works automatically without any prior information about the object. A spherical or cylindrical object determined based on a circularity measure is approximated to a bounding cylinder, while the other general free-shaped objects to a bounding box or a bounding cylinder appropriately. For a general object, its silhouette on the ground is first computed by back-projecting its projected image in image plane onto the ground plane and then a base rectangle on the ground is determined by using the intuition that touched parts of the object on the ground should appear at lower part of the silhouette. The base rectangle is adjusted and extended until a derived bounding box from it can enclose the general object sufficiently. Height of the bounding box is also determined enough to enclose the general object. When the general object looks like a round-shaped object, a bounding cylinder that encloses the bounding box minimally is selected instead of the bounding box. A bounding solid can be utilized to localize a 3D object on the ground and to roughly estimate its volume. Usefulness of our approach is presented with experimental results on real image objects and limitations of our approach are discussed.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.141-150
• /
• 2022

원형단면 U-밴드 튜브에서 층류인 나노유체(물/Al2O3)의 유동 및 열적 특성을 수치적으로 연구하였다. 이 연구에서는 U-밴드 내부유동에서 Reynolds 수와 고체 체적분율의 영향이 유동장, 열전달 및 압력강하에 미치는 영향을 연구했다. 원형곡관에 대한 이전에 발표된 실험 결과와 본 수치해석의 결과가 잘 일치함을 보여 해석방법의 타당성이 있음을 확인하였다. Reynolds 수 뿐만 아니라 나노입자의 고체 체적분율을 증가시키면 열전달계수도 증가함을 보였다. 또한 곡관에서 형성되는 2차 유동은 평균 열전달계수를 높이는 데 중요한 역할을 한다. 그러나 압력강하 곡선은 나노입자 농도가 증가함에 따라 크게 증가함을 보였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.327-334
• /
• 2000

The seismic performance evaluation of the existing non-seismic detailed RC piers has risen as urgent task for rational and cost-effective seismic retrofitting works as well as development of new seismic design concept. The scale model test has been conducted to investigate nonlinear behavior characteristics and the seismic performance of existing piers with lap-spliced longitudinal reinforcements in the plastic hinge zone which are of the solid circular and the hollow rectangular section. The lap splice in this zone is found to cause premature bond failure. The experimental results show very poor seismic performance of circular section pier but relatively large ductility of the rectangular one.

• 한국환경과학회지
• /
• 제3권4호
• /
• pp.403-408
• /
• 1994

Catalytic slurry reactors, in which a solid maintained in the rom of fine particles suspended in a liquid, are frequently used in chemical and biochemical and industries. In these processes the particle loading is normally low so that the effects of particles on the liquid-film mass transfer coefacent and the gas-liquid interface area are assumed to be negligible. But it is known from the works, amongst others, that the finely powdered activated carbon can increase the gas-liquid mass transfer significantly in surface-aerated reactors. The stirred cell (13.2cm inside diameter) contained four baffles and at the stirring speeds range of 80 ∼ 300ppm, the gas-liquid interfacial area could be considered as that of the cross section of the vessel (that is, 130.1cm2). When the stirrer speeds were increased, the effective interfacial area was slightly higher than the geometric area and was obtained experimentally from the Danckwerts plots. Key Words : gas-liquid interfacial area, Duckwert's Plot stirred dell. mass transfer coefficient.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1496-1506
• /
• 2003

The SIMP (solid isotropic material with penalization) approach is perhaps the most popular density variable relaxation method in topology optimization. This method has been very successful in many applications, but the optimization solution convergence can be improved when new variables, not the direct density variables, are used as the design variables. In this work, we newly propose S-shape functions mapping the original density variables nonlinearly to new design variables. The main role of S-shape function is to push intermediate densities to either lower or upper bounds. In particular, this method works well with nonlinear mathematical programming methods. A method of feasible directions is chosen as a nonlinear mathematical programming method in order to show the effects of the S-shape scaling function on the solution convergence.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.796-803
• /
• 2001

Numerical solutions for the convection-dominated melting in a rectangular cavity are presented. The enthalpy-porosity model is employed as the mathematical model. This model is applied in conjunction with the EIT method to detect boundary movement in a phase changing environment. The absorption and evolution of latent heat during the phase change is dealt with by the enthalpy-based energy equation. This seems to be more efficient than resolving the temperature-based energy equation. The velocity switch-off, which is required when solid changes into liquid, is modeled by the porous medium assumption. For efficiency and simplicity of the solutions procedure, this paper proposes a simple algorithm, which iterates the temperature and the liquid fraction of the cells comprising the front layer. The numerical results agree reasonably well with the experimental data and other previous works using the transformed-grid system.

• 한국수학사학회지
• /
• 제26권5_6호
• /
• pp.371-388
• /
• 2013

In ${\ll}$The Method${\gg}$, Archimedes presented the famous heuristic technique for calculating areas, volumes and centers of gravity of various plane and solid figures, utilizing the law of the lever. In that treatise, Archimedes used the fact that the center of gravity of a cone lies one-quarter of the way from the center of the base to the vertex, but the proof of this is not extant in his works. This study analyzes the propositions and their relations of ${\ll}$The Method${\gg}$ focusing on the procedural characteristics of the 'method' of Archimedes. According to the result of that analysis, this study discusses the likely approach which was taken for Archimedes to find out the center of gravity of a cone.

• 진공이야기
• /
• 제5권1호
• /
• pp.13-17
• /
• 2018

Phase transition is not unique to solid state systems or homogeneous molecular systems but it is also observed in highly heterogeneous biological systems. Phase transition and phase separation in cells are recently being found to be central to many biological functions by temporarily and locally controlling the storage and exchange of certain proteins and RNAs. There are also clues suggesting them to be playing pivotal roles in the spatial organization of chromosomes into topological domains and its time-dependent control. Here we introduce early efforts to explain at the molecular level how the spatiotemporal organization of chromosomes are programmed and modulated by the sequence and chemical modifications of the DNA. Continuing works may provide a physical framework to understand the molecular level control of chromosome structure and dynamics that determine the epigenetic state and the fate of the cells.