• 제목/요약/키워드: Solid waste landfill

검색결과 158건 처리시간 0.023초

매립폐기물 성상변화에 따른 침출수 수량 및 수질특성에 관한 연구 (Characteristics of Leachate Quantity and Quality with Different Composition of Municipal Solid Waste in Solid Waste Landfill)

  • 박진규;김혜진;정새롬;이남훈;김석찬
    • 유기물자원화
    • /
    • 제15권2호
    • /
    • pp.109-117
    • /
    • 2007
  • 침출수의 수량 및 수질변화를 평가하기 위하여 세 종류(소각재 100%, 소각재 70%+일반생활폐기물 30%, 생활폐기물 100%)의 모형매립조를 실제 기상조건하에서 운영하였다. 실험결과, 누적 침출수 발생률이 모형매립조 A와 B가 모형매립조 C보다 높은 것으로 나타났다. 모형매립조 A는 pH가 pH 9~11의 범위였으나 시간이 경과하면서 중성으로 점차 변하였다. 염소이온은 소각재를 매립한 모형매립조 A와 B가 높은 것으로 나타났으나 모형매립조 C의 경우 낮게 나타났다. 생활폐기물을 충전한 모형매립조 C의 경우 침출수내의 유기물 농도가 다른 모형매립조보다 높게 나타났다.

  • PDF

폐석회를 이용한 매립지 차수재 개발 (A Development of Landfill Liner by Utilizing Waste Lime)

  • 김준섭;이승학;박준범
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.521-528
    • /
    • 1999
  • As the size of our industry and population inclose, the byproducts such as municipal solid wastes, industrial wastes are in the increasing phase. The treatment of such things is rising as a social problem. Today, the final disposal of these wastes depends mostly on the landfill, and the sanitary landfill is required and designed for preventing soil and groundwater contamination. Clays have been used for a liner material of a sanitary landfill, however, the high quality clay is hard to come by and quite expensive as a lining material in our country. Using the waste lime produced abundantly every year from chemical processes was studied here, made from the proper mixing of the bentonite and the waste lime meets the regulations from the USEPA. The soil property index tests (sieve analysis, specific gravity test Atterberg limit test) were performed, and at last to confirm the sorption characteristics of the bentonite and the waste lime the sorption isotherm equilibrium test and the sorption isotherm were performed with Toluene and Ethylbenzene which are the main components of the leachate from the landfill.

  • PDF

Textured 지오맴브레인을 적용한 폐기물 매립장의 사면 안정성 연구 (Slope Stability of Waste Landfill Using Textured Geomembrane)

  • 신은철;윤석호;심진섭
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
    • /
    • pp.141-144
    • /
    • 2000
  • The slope stability of waste landfill has been a problem in domestic and foreign countries. Waste landfills are being constructed in a reclaimed land or mountainous area. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetic liners in there. The large size direct shear test(30cm x 30cm) equipment was used to determine the interface friction angles between CCLs and soil & geomembranes. The centrifuge model tests were performed to investigate the slope stability with considering various geosynthetic liners conditions and degree of slope. The results of centrifuge model test indicate that the degree of saturation of GCL, roughness of geomembrane, and slope of landfill have greatly influenced on the slope stability of solid waste landfill.

  • PDF

Systematic investigation of heavy metals from MSWI fly ash and bottom ash samples

  • Ramakrishna., CH;Thriveni., T;Ahn, Ji Whan
    • 에너지공학
    • /
    • 제26권4호
    • /
    • pp.35-44
    • /
    • 2017
  • Disposal of municipal solid waste has become a major problem in many countries around the world. As landfill space for the disposal of ash from Municipal Solid Waste Incineration (MSWI) becomes scarce, numerous reports and researches address the various environmental issues about the municipal solid waste incineration waste management and other particulate matters with the range of 10 ~ 2.5. Although in many developing and industrialization countries landfill with the disposal of municipal solid waste, open incineration has become a common practice. Large municipal waste incinerators are major industrial facilities and have the potential to be significant sources of environmental pollution. Despite the significant volume reduction from incineration, waste recycling is important to ensuring the future welfare of mankind. The main goal of the present work is the physical and chemical characterization of the local incineration bottom ash towards its eventual re-utilization. In this paper, we reported the studies on physical and chemical characteristics of municipal solid waste incineration (MSWI) fly ash and bottom ash containing particulate matter whose particulate sizes are lower than $PM_{10}$, $PM_{2.5}$ and heavy metal were investigated.

준호기성 매립구조에 있어서 폐기물 매립방법이 오염물질의 분해에 미치는 영향 (The Effect of solid Waste Landfill Method on Decomposition of pollutants in Semi-aerobic Landfill Structure)

  • 이남훈;이채영
    • 유기물자원화
    • /
    • 제8권4호
    • /
    • pp.153-159
    • /
    • 2000
  • 본 연구는 소각재 주체의 준호기성 매립지를 대상으로 폐기물 매립지가 보유하고 있는 오염물질에 대한 정화능력을 최대한 활용할 수 있는 조기안정화 매립공법을 개발하기 위한 기초적 연구로, 대형 모의 매립실험을 약 4년간 실시하여 폐기물 매립고의 차이에 따른 오염물질의 정화능을 평가하여 다음과 같은 결론을 얻었다. TOC 성분은 폐기물 매립고가 증가할 수록 매립지내에서의 분해량이 많아지는 것으로 나타났으며, T-N의 경우에는 매립고 6m까지는 매립고가 증가할수록 폐기물의 분해능이 향상되는 것으로 나타났으나, 6m 이상부터는 매립고의 증가와는 무관한 것으로 나타났다. 따라서 모의 매립조 내부에서의 TOC와 T-N 성분의 물질수지를 평가할 때 폐기물 매립고가 6m정도 일때 오염물질에 대한 정화능이 가장 뛰어난 것으로 평가되었다.

  • PDF

공기주입 방식을 이용한 매립모형조내 폐기물 안정화 (Stabilization of Solid Waste in Lysimeter by Air Injection Mode)

  • 김경;박준석;이환;이철효;김정대
    • 한국환경보건학회지
    • /
    • 제31권1호
    • /
    • pp.15-22
    • /
    • 2005
  • This study was conducted to evaluate air injection mode on stabilization of solid waste in lysimeter. For three lysimeters, one was maintained under anaerobic condition as control, and air was injected into two lysimeters in continuous mode (atmospheric pressure) and intermittent mode (high pressure of 2 bar). Distilled water was sprayed over solid waste in 1.4 l/$m^3$(solid waste)/day, supposing rainfall intensity of 1,200 mm/yr and 30% infiltration. Oxygen in landfill gas was not detected in control lysimeter during operational days. After 30 day-aeration, oxygen concentrations of continuous and intermittent modes were maintained in 14% and 6%, respectively. $COD_{Cr}$ removal efficiencies of continuous and intermittent modes were about 70% and 50%, and BOD5 removal efficiencies were about 80% and 20%, respectively. In view of oxygen supply, and $COD_{Cr}$ and $BOD_5$ removal, continuous air injection mode of atmospheric pressure was more effective than intermittent mode of 2 bar. Settling degree of solid waste in case of two air injection modes was 3 times higher than that of anaerobic condition as control. Considering the above results, it was thought that air injection (especially continuous atmospheric pressure) could improve degradation of solid waste and induce preliminary stabilization in landfill site.

폐기물 처리시설에 관한 소도시 시민의 의식 조사 (Citizen's Attitude to Treatment Facilities of Municipal Solid Waste in Small City)

  • 장성호;박진식
    • 환경위생공학
    • /
    • 제14권1호
    • /
    • pp.70-79
    • /
    • 1999
  • A questionary survey was conducted to investigate citizen's attitude to treatment facilities of municipal solid waste in Miryang during 8. June of 1998 and 22 June of 1988. Collection effiencies was 86.7%, as 260 individuals of the 300 individuals. The survey showed that 43.0% of answers recognized seriousness of problem of the waste treatment and 33.1% of respondents concerned about recycle of organic waste. 40.8% of total answers said that they most hated landfill site among waste treatment facilities, and most citizens wanted as much distant as possible from waste treatment facilities. It was investigated that the greater part of respondents wanted the greatest compensation. About 58% of respondents was opposed to complete waste treatment facilities. 36.2$ among answers wanted establishment of waste treatment facilities in an industrial complex or an industrial area. The majority of respondents was willing to increase recycle rate and recognized seriousness of landfill site security. The majority of citizens do not trust environmental administration of Miryang City and they think that democracy and open of administration need for overcome MINBY.

  • PDF

한국에서의 매립지에 대한 환경영향평가 (Environmental Impact Assessment for the Waste Landfill Site in the Republic of Korea)

  • 이무춘
    • 환경영향평가
    • /
    • 제4권3호
    • /
    • pp.49-54
    • /
    • 1995
  • Most of the solid waste has been land-filed as an ultimate disposal method in Korea, with might induce many environmental problems by generating odor, particulates and leachate. The landfill site should be considered as a kind of pleasant facility to neighboring residents. Currently, for a landfill site, while the environmental law requires to perform the EIA before the planning. EIA has been performed after the selection of the landfill-site. That might be controversal to the purpose of doing EIA. In this study, the weakness of the EIA for the landfill-site was analysed and was suggested for comprehensive EIA in Korea as well.

  • PDF

폐기물매립장의 사면차수체계 안정화 연구 (The Slope Stabilization of Solid Waste Landfill Liner System)

  • 신은철;김종인;박정준
    • 한국지반환경공학회 논문집
    • /
    • 제10권3호
    • /
    • pp.21-28
    • /
    • 2009
  • 폐기물매립장에서 토목합성재료의 사용은 점토, 모래 등 자연골재 수급의 어려움으로 해마다 증가하고 있다. 특히, 우리나라의 폐기물매립지는 곡간지형이나 해안매립지에 건설하는 경우가 많아 지반공학적으로 매우 불리한 조건이다. 따라서, 본 연구는 폐기물매립장에 사용되는 토목합성재료의 마찰특성을 평가하였고, 현장모형실험, 수치해석을 통해 토목합성재료가 사용된 폐기물 매립장의 사면안정성에 관하여 연구하였다. 현장실대형 실험을 통한 토목합성재료와 사면의 파괴 거동을 분석한 결과 일체형과 분리형 지오컴포지트는 자체의 변형 뿐만아니라 하부 지오멤브레인의 응력 및 변형율에도 영향을 미치는 것을 알 수 있었다. 일체형이 설치된 사면이 분리형이 설치된 사면에 비해 약 50% 적은 변형을 나타내었다. 사면의 전방변위와 침하량은 분리형이 설치된 사면이 일체형이 설치된 사면이 비해 약 3배 이상의 침하량과 변위를 나타내었다. 토목합성재료와 지반, 토목합성재료와 쓰레기, 토목합성재료사이의 불연속면을 인터페이스요소로 모델링하여 수치해석을 수행한 결과, 현장 실대형실험 결과와 잘 부합되는 것으로 판명되었다. 이는 토목합성재료의 상호간 변위를 확인할 수 있어 인터페이스요소로 모델링하는 것이 토목합성재료가 사용된 폐기물 매립장의 사면안정해석에 적절한 것으로 판단되었다.

  • PDF