• 대한기계학회논문집B
• /
• 제31권5호
• /
• pp.473-481
• /
• 2007

Compared to other types of fuel cells, SOFC has advantages like a wide output range and the direct use of hydrocarbon fuel without the process of external reforming. Particularly because the direct use of fuel without reforming reaction is closely linked to overall system efficiency, it is a very attractive advantage. We tried the operation with methane. However, although methane has a small number of carbons compared to other hydrocarbon fuels, our experiment found the deposition of carbon on the surface of the SOFC electrode. To overcome the problem, we tried the operation through activating internal reforming. The reason that internal reforming was possible was that SOFC runs at high temperature compared to other fuel cells and its electrode is made of Ni, which functions as a catalyst favorable for steam reforming.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.125-131
• /
• 2007

This paper presents guideline for a practical design of the hybrid system combining a pressurized solid oxide fuel cell and a gas turbine. Design of the hybrid system based on a virtually designed gas turbine was simulated using models for off-design operation of the gas turbine. Two system configurations, with different method for supplying reforming steam, are considered and their design characteristics are compared. A higher design cell temperature provides better system performance. However, there exists a maximum allowable design cell temperature because the operating point of the compressor approaches the surge point with increasing fuel cell temperature. Increased pressure loss at the fuel cell moves the compressor operating point toward the surge point and reduces system performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2015-2020
• /
• 2007

Diesel is an excellent candidate fuel for fuel cell applications due to its high hydrogen density and well-established infrastructure. But, it is hard to guarantee desirable performance of diesel reformer because diesel reforming has several problems such as sulfur poisoning of catalyst and carbon deposition. We have been focusing on diesel autothermal reforming(ATR) for substantial period. It is reported that ATR of diesel has several technical advantages such as relatively high efficiency and fuel conversion compared to steam reforming(SR) and partial oxidation(POX). In this paper, we investigate characteristics of diesel reforming under various ratios of reactants(oxygen to carbon ratio, steam to carbon ratio) for improvement of reforming performances(high reforming efficiency, high fuel conversion, low carbon deposition). We also exhibit calculated heat balance of autothermal reformer at each condition to help thermal management of SOFC system.

• 대한기계학회논문집B
• /
• 제41권2호
• /
• pp.109-115
• /
• 2017

전산유체해석(CFD) 기법을 이용하여 음극 지지체형 고체산화물 연료전지(SOFC)에 대한 수치해석을 수행하였다. 평판형 구조의 SOFC 에서 가스채널과 리브폭 변화에 따른 성능과 온도균일성에 관한 연구가 이루어졌다. 전산해석 툴로서는 공개소스 전산유체해석 툴박스인 OpenFOAM 을 이용하였다. 수치해석결과, 산소고갈이 일어나지 않는 범위 내에서 가스채널과 리브폭의 증가는 성능과 온도 균일성에 크게 영향을 미치지 않음을 알 수 있었다. 하지만 넓은 리브폭의 사용과 고전류밀도에서의 작동은 산소고갈로 인한 성능저하의 가능성이 있음을 확인하였다.

• 항공우주산업기술동향
• /
• 제7권2호
• /
• pp.95-105
• /
• 2009

연료전지는 소음이 낮고$CO_2$ 배출이 없는 친환경적 특성을 기반으로 항공기 추진시스템에 적용되고 있으며, 현재 연료전지를 탑재한 여러 종류의 무인항공기와 소형 유인항공기 개발이 진행되고 있다. 항공기용 연료전지는 대표적으로 PEMFC(Proton Exchange Membrane Fuel Cell)방식과 SOFC(Solid Oxide Fuel Cell) 방식으로 분류되며, 항공기의 임무 및 운용조건에 적합한 연료전지 시스템이 개발되고 있다. 무인항공기의 경우 대부분 PEM 연료전지 기술을 기반으로 군용 또는 상용으로 활용할 수 있는 다양한 형태와 크기의 항공기가 개발되고 있으며, 시스템의 안정성과 운용시간이 더욱 향상될 것이다. 소형 유인항공기에서는 추진시스템을 연료전지로 대체하기 위한 많은 연구가 수행되고 있으며, 또한 대형 상용 항공기의 보조동력장치(APU)에 연료전지를 적용하여 성능을 높이기 위한 개발이 진행되고 있다. 향후, 연료전지항공기는 연료전지의 전력밀도 증가와 더불어 신뢰성과 효율을 더욱 향상시킬 것으로 기대된다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 춘계총회 및 학술발표회
• /
• pp.47-47
• /
• 2002

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.133-138
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.987-988
• /
• 2011

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.260-265
• /
• 2006

An experimental study on the catalytic reformer adopted in the auxiliary power unit system of solid oxide fuel cell was conducted. A 3-fluid nozzle, by which liquid fuel such as diesel, water and air are sprayed and uniformed mixed, was designed and used in this study. An electrically heated monolith inserted in the reformer was used for the vaporization of fuel and water in the transient state of reformer. The reformer uses the partial oxidizing reaction at the catalyst and the supply of water prevents the flame combustion in the spraying zone and lessens the deactivation of catalyst. The result showed that the reforming of liquid fuel can be started by the electrically heated monolith and the 3-fluid nozzle can give the uniform mixing of fuel, water and air. It was also found that the reformer fueled by n-hexadecane can make the reformate, at best, containing $H_2$ at 15.5% and CO at 11.5% that are used as fuel in the solid oxide fuel cell.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.313-317
• /
• 2007

In-situ micro-channeled multi tubular solid oxide fuel cell(SOFC) was fabricated using multi-pass extrusion process with out side diameter of 2.7 mm and active length of 5 mm that contained 61 individual cells. Cell materials used in this work were NiO-YSZ (50 : 50 vol.%), 8 mol% yttria-stabilized zirconia(8YSZ), $La_{0.8}Sr_{0.2}MnO_3(LSM)$ as anode, electrolyte, and cathode, respectively. The arrangement of each electrode and electrolyte layer in green bodies showed uniformity and integrity after extrusion and sintering. The XRD analysis confirmed that no reaction phases appeared and the microstructure of the electrolyte was fairly dense (relative density > 96%) after sintering.