• 제목/요약/키워드: Solid environmental samples

검색결과 243건 처리시간 0.028초

HPLC 및 GC에 의한 농약분석에서 전처리에 대한 연구 (Studies on Pretreatment for Analysis of Pesticides by Using HPLC and GC)

  • 오보영;배준현;강준길;김연두
    • 대한화학회지
    • /
    • 제43권6호
    • /
    • pp.663-669
    • /
    • 1999
  • HPLC/UV 및 GC/FPD 법을 사용하여 환경수에 존재하는 Diazinon, EPN, Fenitrothion, Phosalon 및 Phosmet 등 5종의 유기인계 잔류농약을 분석하였다. 전처리 과정으로 고체상추출법(SPE)과 용매추출법(LLE)을 각각 적용한 결과, 회수율과 재현성에 있어, HPLC/UV에서는 용매추출법(LLE)보다 고체상추출법(SPE)이 더 우수하였고, GC/FPD에서는 고체상추출법(SPE)보다 용매추출법(LLE)이 더 우수하였다. 또 수돗물 및 하천수(와룡천)에 일정량의 유기인계 농약을 가하여 만든 합성시료중 각 성분을 분석한 결과, SPE-HPLC/UV 법에서는 회수율이 101%, % RSD는 4.3∼8.7이었고, LLE-GC/FPD 법에서는 회수율이 100%, % RSD는 3.2∼9.5이었다. 이 결과는 두 방법 모두 유기인계 잔류농약 분석에 이용할 수 있는 우수한 방법임을 제시하고 있다.

  • PDF

고체상미량분석법(SPME-GC/FID)에서 실험계획법을 이용한 디젤첨가제 미량분석의 최적화 연구 (Optimization Study of Trace Analysis of Potential Diesel Oxygenate Using the Design Of Experiment (DOE) in Solid-Phase Microextraction with GC/FID)

  • 박재상;장순웅
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제12권5호
    • /
    • pp.73-85
    • /
    • 2007
  • 본 연구에서는 액상에서 EGBE, DGBE, DBM, TGME의 효율적인 분석을 위해 이용되던 액상추출법을 대신할 수 있는 방법으로 GC/FID를 이용한 SPME법 실험 연구를 진행하였다. 그리고 실험계획법(DOE)을 사용하여 EGBE를 포함한 디젤첨가제 미량분석의 최적조건을 설명하였다. 실험은 통계분석결과 뿐만 아니라 요인 수의 최적화에 따른 중심합성설계에 의한 완전요인 설계법을 사용하였다. 반응표면분석은 추출 효율이 주 영향인 염농도, 흡착 온도, 흡착 시간과 sonication 시간에 따른 2차 다항식에 의해 설명될 수 있음을 보여주었다. 실험계획법(DOE)을 사용하는 것은 액상 시료에서 디젤첨가제의 정량분석을 개선하는 자료분석법이 될 것이다.

액체크로마토그래피를 이용한 수돗물 중 nitrosamine 화합물 분석의 최적화 (Optimization of analytical conditions for the determination of nitrosamines in chlorinated tap water by high performance liquid chromatography)

  • 한기찬;김희갑
    • 분석과학
    • /
    • 제23권6호
    • /
    • pp.551-559
    • /
    • 2010
  • 본 연구는 칼럼 전 유도체화와 HPLC-형광검출을 이용해 염소 소독 음용수 중 7가지 nitrosamine 화합물을 분석하는 방법을 추출 과정(액-액 추출 vs. 고상 추출)과 형광 유도체화 과정(denitrosation 및 dansylation)으로 나누어 평가하여 확립하였다. 최적화된 유도체화 방법으로 두 가지의 추출법을 비교하였을 때, Ambersorb 572를 이용한 고상 추출에 대한 회수율과 재현성(상대표준편차, RSD)이 각각 54.4-88.7%와 1.9-19.4%로 액-액 추출의 51.4-87.7%와 4.2-33.3%에 비해 더 좋게 나타났다. 확립된 방법은 기존의 HPLC를 이용한 분석 방법에 비해 회수율과 재현성 모두 개선되었으며, 방법검출한계(method detection limits, MDLs)는 0.5-4.4 ng/L이었다. 이 방법으로 춘천의 염소로 소독하는 두 곳의 정수장과 10 곳의 수도꼭지에서 채취한 물 시료 중 nitrosamine 화합물을 분석한 결과, N-nitrosodimethylamine (NDMA)이 주요 화합물이었으며, 농도 범위는 26.1-112 ng/L이었다.

고체상미량분석법(SPME-GC/FID)에서 요인배치법을 이용한 디젤첨가제의 미량분석의 특성 평가 (Characteristics of trace analysis of potential diesel oxygenates using the factorial design in solid-phase microextraction with GC/FID)

  • 박재상;장순웅
    • 분석과학
    • /
    • 제20권5호
    • /
    • pp.370-382
    • /
    • 2007
  • 본 연구에서는 GC/FID를 이용한 SPME법을 적용하여 액상에서 대표적 디젤첨가제인 EGBE, DGBE, DBM, TGME의 미량 분석 가능성을 조사하였다. 또한, 요인배치설계법을 적용하여 EGBE, DGBE, DBM, TGME 미량분석의 최적조건을 도출하였다. 실험은 통계분석결과 뿐만 아니라 요인 수의 최적화에 따른 중심합성설계에 의한 완전요인 설계법을 사용하였으며, 반응표면분석은 추출 효율이 주 영향인염 농도, 흡착 온도, 흡착 시간과 sonication 시간에 따른 2차 다항식에 의해 설명될 수 있음을 보여주었다. 본 연구에서의 결과는 요인배치설계법을 사용하여 액상 시료에서 EGBE, DGBE, DBM, TGME의 정량분석을 개선하는 새로운 자료분석법을 보여주었다.

GC/MS-SIM을 이용한 우리나라 수중 생물시료 중 알킬페놀, 클로로페놀과 비스페놀 A의 분석을 위한 냉동필터법의 응용 (Application of Freezing Filtration Method to the Analysis of Alkylphenols, Chlorophenols and Bisphenol a in Korean Aquatic Biological Samples Using GC/MS-SIM)

  • 김협;장철현
    • 대한환경공학회지
    • /
    • 제29권6호
    • /
    • pp.689-698
    • /
    • 2007
  • 우리나라 수중 생물시료에 있는 알킬페놀류, 클로로페놀류 및 비스페놀 A의 정량분석을 위한 새로운 기술을 제시하였다. 우리나라 수중 생물시료에 있는 알킬페놀류, 클로로페놀류 및 비스페놀 A를 아세토니트릴로 추출한 다음 아세토니트릴 층을 2 시간동안 $-60^{\circ}C$에 냉동하였다(냉동필터). 또한, XAD-4를 이용한 고체상 추출 후, isobutoxycarbonyl(isoBOC) 또는 tert-butyldimethylsilyl(TBDMS) 유도체화 한 후 가스크로마토그래피/질량분석기-선택이온 모니터링 방법을 사용하였다. isoBOC 유도체화와 TBDMS 유도체화의 회수율은 $70.1\sim150.6%$$93.8\sim108.3%$이였으며, 선태이온 모니터링 방법을 이용한 비스페놀 A의 분석방법 검출한계는(MDLs) 각각 $0.062{\mu}g/kg$$0.010{\mu}g/kg$이었다 이 방법을 우리나라 수중 생물시료에 적용하였을 때, 11가지 페놀성 내분비계장애물질의 농도는 $0.675\sim1.970{\mu}g/kg$이었다.

요중 벤지딘 대사물질 분석의 전처리 및 저장방법에 따른 회수율 비교 (The study on the pretreatments for the analys is of benzidine metabolites in urine)

  • 김현수;원종욱;김치년;노재훈
    • 한국산업보건학회지
    • /
    • 제9권2호
    • /
    • pp.100-109
    • /
    • 1999
  • This study evaluates the pretreatment for analysis of benzidine metabolites in urine by measuring the recovery rates according to the temperature and periods of storage of the urine. By the solid phas e extraction, the recovery rates of basic hydrolysis are benzidine 67.4 %, monoacetylbenzidine 105.1 %, and diacetylbenzidine 115.8 %, respectively. By the liquid extraction, the recovery rates of back-extraction into 0.1 M perchloric acid are benzidine 105.7%, monoacetylbenzidine 94.2 %, diacetylbenzidine 72.8 %, respectively. The difference of the recovery rates between the back-extraction into 0.1 M HCl and 0.1 M perchloic acid after basic hydrolysis are 101 % and 98.8 %, respectively. When the recovery rates of the urinary s amples of pH 3, pH 7, pH 12 at $25^{\circ}C$ and $-76^{\circ}C$ are compared for four weeks, there are no differences according to the temperature and the periods of storage. The above results show that the solid phase extraction and back-extraction by 0.1 M perchloric acid after basic hydrolys is are suitable for the analysis of benzidine metabolites. There are no difference of the recovery rates of the urinary samples stored at $25^{\circ}C$ and $-76^{\circ}C$ at pH 3, pH 7, pH 12, respectively for 28 days.

  • PDF

The Solid Phase Extraction of Phenol and Chlorophenols by the Chemically Modified Polymeric Adsorbents with Porphyrins

  • Jung, Min-Woo;Kim, Ki-Pal;Cho, Byung-Yun;Paeng, Insook R.;Lee, Dai-Woon;Park, Young-Hun;Paeng, Ki-Jung
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권1호
    • /
    • pp.77-81
    • /
    • 2006
  • The commercially available Amberlite XAD-2 and XAD-4 resins were modified with macrocyclic protoporphyrin IX (PPIX) or tetrakis(p-carboxyphenyl) porphyrin (TCPP) to enhance the adsorption capacity for phenol and chlorophenols. The chemically modified polymeric adsorbents (XAD-2+PPIX, XAD-2+TCPP, XAD-4+PPIX, and XAD-4+TCPP) were applied to the solid phase extraction as an adsorbent material for the preconcentration of phenol and chlorophenols in environmental waters. Generally, the synthesized adsorbents showed higher recoveries than underivatized adsorbents, XAD-2 and XAD-4, without matrix interferences. Especially, XAD-4+PPIX showed more than 90% recoveries for all compounds used in this study including hydrophilic phenol. The major factor for the increase of the adsorption capacity was the increase of $\pi$-$\pi$ interaction between adsorbents and samples due to the introduction of the porphyrin molecule. However, the breakthrough volumes and recovery values of the XADs+TCPP columns were slightly decreased for the bulky chlorophenols such as TCP and PCP. Using molecular mechanics methods, the structures of TCPP and PPIX were compared with that of porphine, the parent molecule of porphyrin. Four bulky p-carboxyphenyl groups of TCPP were torsional each other, thus the molecular plane of TCPP were not on the same level. In conclusion, the decrease of breakthrough volumes and recovery values of XADs+TCPP columns for bulky phenols can be explained by the steric hindrance of the $\pi$-$\pi$ interaction between porphyrin plane and the phenols.

Utilization of Vitrified Glass as an Aggregate Source in Asphalt Concrete Mixtures

  • Min, Jeong-Ki
    • 한국농공학회지
    • /
    • 제39권2호
    • /
    • pp.51-56
    • /
    • 1997
  • Abstract Over 4.1 billion tons of non-hazardous solid wastes are generated in the United States annually. This equals to about 16 tons of wastes per person, per year. Disposal of the wastes is a national concern due to many factors such as environmental issues, costs, and public views. South Carolina, like many other states, had a home of many military bases which were ordered to be closed. The contaminated soil was vitrified and tested for suitability in the asphalt mixes. For mix design purposes, a total of 75 specimens were made and tested. For moisture susceptibility testing, a total of 32 samples were made and tested. The results indicate that the mixtures made with sample B produced dry and wet that were comparable with the controlled mixture. At this point and with in this limited study, use of 5% of sample B in asphalt mixture is recommended in several applications such as parking lots, walking paths and drive ways.

Metallo-collagenase production by Arthrobacter creatinolyticus KP015744

  • Savita A. Kate;Madhuri Sahasrabudhe;Archana Pethe
    • Advances in environmental research
    • /
    • 제11권1호
    • /
    • pp.1-16
    • /
    • 2022
  • Amongst 27 isolates from deteriorated leather samples, Arthrobacter creatinolyticus KP015744 zzx28 was found to be an efficient collagenase producer. Collagenase production of 13.33 µmoles/min was shown at an optimum temperature at 37℃ after 72h and at pH 7.5 by using 2 ml/dL inoculum in 10 mg/ml collagen peptide type I as a substrate. In presence of Hg2+, EDTA and 𝛽-mercaptoethanol the collagenase production by the isolate was strongly inhibited however Fe2+, Ca2+and DMSO enhanced production of the enzyme. Specific activity was found to be 19.46×103 U/mg and molecular weight 66 kD by SDS PAGE. Isolate also has potential to hydrolyze keratin which is another important protein found in leather. Experimental results propose that collagenase can be effectively used as a tool for collagen and keratin rich solid waste treatment.

BMP(Biochemical Methane Potential) test를 통한 도심하천 퇴적물의 최종메탄발생수율 및 생분해도 산정 (Estimation of Ultimate Methane Yields and Biodegradability from Urban Stream Sediments Using BMP Test)

  • 송재홍;김석구;이준기;고태훈;이태윤
    • 한국지반환경공학회 논문집
    • /
    • 제11권2호
    • /
    • pp.33-42
    • /
    • 2010
  • 본 연구는 부산시에 위치한 하천퇴적물에 대한 현재의 오염상태와 혐기성 상태에서의 잠재메탄발생량을 평가하기 위해 실시하였다. 먼저 부산시 하천중 총 5곳을 선정하였고 대상하천의 퇴적물을 채집하였다. 그리고 퇴적물특성을 알아보기 위해 퇴적물의 화학적산소요구량, 강열감량, 총 유기탄소에 대해서 분석을 실시하였고 그 결과 각각 15.20~75.07mg $15.20{\sim}75.07mg\;g^{-1}$, 2.34~11.54%, 1.28~34.21%로 나타났다. 또한 실험실규모의 BMP Test를 실시하였고 그 결과 pH가 약간 증가하다가 약 7.11~7.35에서 평형을 이루었으며, C/N, 최종메탄 및 이산화탄소수율 그리고 생분해도는 각각 1.05~10.27, 10.1~179.4, 10.3~34.4, 4.0~30.1을 나타내었다. 그리고 최종메탄수율과 C/N비, 최종이산화탄소수율, COD, 강열감량, 총유기탄소와의 상관관계를 알아보기 위해 선형모델에 최소자승법을 적용해 평가하였고 그 결과, COD($r^2=0.7586$)와 강열감량($r^2=0.7876$)을 제외한 나머지 모든 항목에서 최종메탄수율과 높은 상관관계를 띔을 알 수 있었다($r^2=0.9795{\sim}0.9858$). 따라서 C/N 또는 TOC 분석결과를 통해 메탄발생수율을 예측 가능할 것으로 판단된다.