• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.396-402
• /
• 1992

Carbon solid was prepared from dormant mesophase pitch (DMPP) without using a binder and its properties were characterized. DMPP powder was stabilized with air or nitric acid in pretreatment stage so that it might not soften in later heat ttreatment stage. Optimum sintering properties were obtained from carbon powder with 2.36∼2.38 of C/H atomic ratio and 1.27∼1.40 of C/O atomic ration in air stabilization. In nitric acid stabilization, optimum sintering properties were obtained when 20∼40 vol.% of nitric acid solution was used. Compressive strength increased up to 1200$^{\circ}C$ of heat treatment temperature, and the highest compressive strength and bulk density of carbon solid from DMPP were 3000 kgf/㎤, respectively. The optical properties of carbon solid obtained was fine mosaic structure. Carbon solid after graphitization showed the properties of hard carbon due to stabilization and its shore hardness was 120.

• Carbon letters
• /
• 제15권1호
• /
• pp.15-24
• /
• 2014

As a part of the electromagnetic spectrum, microwaves heat materials fast and efficiently via direct energy transfer, while conventional heating methods rely on conduction and convection. To date, the use of microwave heating in the research of carbon-based materials has been mainly limited to liquid solutions. However, more rapid and efficient heating is possible in electron-rich solid materials, because the target materials absorb the energy of microwaves effectively and exclusively. Carbon-based solid materials are suitable for microwave-heating due to the delocalized pi electrons from sp2-hybridized carbon networks. In this perspective review, research on the microwave heating of carbon-based solid materials is extensively investigated. This review includes basic theories of microwave heating, and applications in carbon nanotubes, graphite and other carbon-based materials. Finally, priority issues are discussed for the advanced use of microwave heating, which have been poorly understood so far: heating mechanism, temperature control, and penetration depth.

• Carbon letters
• /
• 제4권3호
• /
• pp.111-116
• /
• 2003

Carbon/carbon composites were developed using PAN based carbon fibres and phenolic resin as matrix in different volume fractions and heat treated to temperatures between $1000^{\circ}C$ to $2500^{\circ}C$. Although both the starting precursors are nongraphitizing hard carbons individually, their composites lead to very interesting properties e.g. x-ray diffractograms show the development of graphitic phase for composites having fibre volume fractions of 30~40%. Consequently the electrical resistivity of such composites reaches a value of $0.8\;m{\Omega}cm$, very close to highly graphitic material. However, it was found that by increasing the fibre volume fraction to 50~60%, the trend is reversed. Optical microscopy of the composites also reveals the development of strong columnar type microstructure at the fibre (matrix interface due to stress graphitization of the matrix. The study forcasts a unique possibility of producing high thermal conductivity carbon/carbon composites starting with carbon fibres in the chopped form only.

• Tribology and Lubricants
• /
• 제38권5호
• /
• pp.222-226
• /
• 2022

Between diaphragms made of stainless steel (SUS), which is the main component of a hydrogen gas compressor, micro-slip occurs owing to repeated bending, resulting in scratches on the surface. The surface scratch of the compressor part is a problem with airtightness, which reduces the efficiency of the compressor; in severe cases, damage is a possibility. In this study, the changes in friction and wear characteristics due to the surface polishing of SUS and carbon-based solid lubricant films (graphene and CNT) were analyzed. Bare SUS, polished SUS, graphene film, and CNT film specimens were prepared. The surface roughness of the SUS was significantly reduced by surface polishing but increased by carbon-based solid lubricating films. In contrast, the friction coefficient maintained a similar value after surface polishing but was significantly reduced by the carbon-based solid lubricant films. In particular, the graphene film exhibited the lowest initial friction coefficient, while the CNT film exhibited the lowest overall average friction coefficient. Regarding the wear rate, polished SUS exhibited the lowest value, but the surface condition of the wear track showed that the carbon-based solid lubricating films were relatively less damaged. Although the wear rate measured was largely attributed to the solid lubricating film peeling off, the SUS surface under the film was considered protected.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2353-2357
• /
• 2013

The objective of this study was to develop a simple, less time-consuming and accurate sampling technique based on solid-phase sorption with activated carbon as the sorbents. The results from solid-phase sorption techniques were compared to that from a conventional solvent impinger-based technique to confirm the efficacy of the proposed method. The laboratory results indicated that the solid-phase sorption method was suitable for the determination of siloxanes as the measured concentrations were similar to that from a solvent impinge method. The data from solid-phase sorption method showed excellent recovery and reproducibility while the sampling was less labor intensive and less time consuming than the solvent impinge method. Following the laboratory tests, the solid-phase sorption technique was successfully applied to sampling biogas from a field site. This study shows that the activated carbon-based solid-phase sorption can be a reliable and less time-consuming option for the sampling and collection of siloxanes under various different landfill conditions.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.285-290
• /
• 2009

유통기한이 7일 밖에 되지 않는 무싹의 저장성 향상을 위해서 고체 이산화탄소를 처리하였다. 이를 위해 고체 이산화탄소의 승화시 발생하는 이산화탄소가스와 극저온의 온도로 농산물에 고이산화탄소 처리와 예냉처리를 동시에 할 수 있는 처리 장치를 개발하였는데 개발된 장치는 처리 대상 작물 주위를 10분만 $5^{\circ}C$와 80% 이산화탄소로 조성하였다. 개발된 고이산화탄소 처리 장치를 이용하여 저장 전과 저장 중의 고체 이산화탄소 처리와 저장 전과 저장 중을 모두 한 처리, 그리고 무처리구를 두어 무싹의 저장성을 비교하였다. 고이산화탄소를 처리한 무싹은 $25{\mu}m$ ceramic film 포장하여서 $8^{\circ}C$에 저장하였다. 무순의 고이산화탄소 처리는 생체중 감소에는 영향을 주지 못하였고 저장 1일 째 포장내 이산화탄소와 산소 농도는 저장 중 처리구에서 40%와 10%로 고이산화탄소 농도를 보였으나 저장 7일째에는 모든 처리구의 이산화탄소 농도는 5% 미만으로 감소하였다. 고농도 이산화탄소 처리는 저장 15일째 에틸렌 농도를 낮추는 효과를 보였으나. 외관상 품질과 이취에서는 효과를 보이지 않았다.

• 대한환경공학회지
• /
• 제22권1호
• /
• pp.133-139
• /
• 2000

리그닌의 열분해반응 후 발생하는 잔류고형물을 활용해보고자 $ZnCl_2$로 활성화하여 활성탄을 제조하였다. 공정변수로 설정한 활성화 온도, 활성화 시간 및 활성화제의 첨가량 등이 활성탄의 세공구조와 비표면적에 미치는 영향을 조사하여 최적 활성화 조건을 구하였다. 리그닌의 열분해 잔류고형물에 활성화제인 염화아연을 300wt% 첨가한 것을 질소분위기에서 $1000^{\circ}C$로 1시간 동안 활성화시켰을 때 비교적 높은 비표면적과 흡착능을 가지면서 세공구조가 잘 발달된 활성탄을 제조할 수 있었다.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.281-288
• /
• 2010

A carbon doped $TiO_2$ (C-$TiO_2$) photocatalyst, which shows good photocatalytic activity to Ultraviolet irradiation and visible irradiation, was successfully prepared by co-grinding of $TiO_2$ with ethanol or Activated Carbon(C), followed by heat treatment at $200^{\circ}C$ in air for 60 min. Ethanol and C were used as a representative agent of liquid and solid for carbon doping. Their influence on improving photocatalytic ability and carbon doping degree was studied with degradation of methyl orange and XPS analysis. The product prepared by co-grinding of $TiO_2$ with Ethanol had Ti-C and C-O chemical bonds and showed higher photocatalytic activity than the product prepared by co-grinding of $TiO_2$ with C, where just C-O chemical bond existed. As a result, mechanochemical route is useful to prepare a carbon doped $TiO_2$ photocatalyst activating to visible irradiation, where the solid-liquid operation is more effective than solid-solid operation to obtain a carbon doped $TiO_2$.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.492-497
• /
• 2006

The study on laser-ablation plasmas has been strongly interested in fundamental aspects of laser-solid interaction and consequent plasma generation. In particular, this plasma has been widely used for the deposition of thin solid films and applied to the semiconductors and insulators. In this paper, we developed and discussed the generation of carbon ablation plasmas emitted by laser radiation on a solid target, graphite. The progress of carbon plasmas by laser-ablation was simulated using Monte-Carlo particle model under the pressures of vacuum, 1 Pa, 10 Pa and 66 Pa. At the results, carbon particles with low energy were deposited on the substrate as the pressure becomes higher However, there was no difference of deposition distributions of carbon particles on the substrate regardless of the pressure.

• 한국주조공학회지
• /
• 제8권3호
• /
• pp.287-295
• /
• 1988

The experiment was carried out for the purpose of studying the carburization of pure iron ingot and sintered iron powder by solid carbon in the atmosphere of CO gas. The volocity of carburization was estimaed by the diffusion coefficient D calculated by carburization equation. The results obtained were as follow: 1. The higher the carburization temperature, carburization depth and carbon concentration were increased, and the melting zone which had $2.8{\sim}3.4%C$ at the $3{\sim}4mm$ from interface of carburization was formed at $1300^{\circ}C$. 2. The main carburization mechanism of pure iron ingot and the sintered iron powder were proceeded by CO gas up to $1100^{\circ}C$, solid carbon over than $1300^{\circ}C$, respectively. 3. The main carburization mechanism of pure iron ingot at $1200^{\circ}C$ was proceeded by solid carbon, and sintered iron powder was proceeded bs CO gas, however, in case the reaction time, the carburization was proceeded by solid carbon over than 5hrs. 4. The diffusion coefficient D of carbon were $0.559{\times}10^{-6}cm^2.sec^{-1}$ at $1100^{\circ}C$, $0.237{\times}10^{-6}cm^2.sec^{-1}$ at $1200^{\circ}C$, $0.087{\times}10^{-6}cm^2.sec^{-1}$ at $1300^{\circ}C$, in case of pure iron ingot carburized. 5. The diffusion coefficient D of carbon were $0.124\;cm^2.sec^{-1}$ at $1100^{\circ}C$, $0.102\;cm^2.sec^{-1}$ at $1200^{\circ}C$, $0.480\;{\times}10^{-6}cm^2.sec^{-1}$ at $1300^{\circ}C$, in the case of sintered iron carburized at the pressuring $4ton\;/\;cm^2$.