• 한국전자통신학회논문지
• /
• 제5권5호
• /
• pp.504-508
• /
• 2010

현 농촌사회는 점차 고령화 사회가 되어감에 따라 노동력 감소 문제점이 발생하고 있다. 본 연구을 통하여 생육 단계별 수위를 자동 컨트롤하여 관리할 수 있는 농작물의 수위 조절 시스템 연구 개발하였다. 수위측정에는 초음파 센서를, 급 배수로의 수문 제어에는 서보모터를 사용하고 이들의 신호를 처리하는 제어부로는 ATmega128을 사용하였다. 본 시스템을 통하여 노동력 감소의 문제점을 해결하고 농촌사회의 자동화 발전 및 고령화 사회에 큰 기여를 기대 할 수 있을 것이다.

• 한국진공학회지
• /
• 제22권3호
• /
• pp.168-173
• /
• 2013

본 연구에서는 기존의 상업용 태양전지에서 전자-정공 재결합을 최소화하여 태양전지의 효율을 향상시키는 부가장치인 전자전달증대기(Electron Relay Enhancer: ERE)를 소개한다. 전자전달증대기는 교류 전력 공급 장치와 연결된 두 개의 캐패시터와 전자의 흐름 방향을 제어하는 브릿지 다이오드 시스템으로 구성되어 있다. 두 개의 캐패시터는 브릿지 다이오드 시스템을 통하여 태양전지로부터 전자를 포집하고 포집된 전자를 로드저항이나 인버터쪽으로 펌핑하는 것을 반복한다. 양으로 대전된 한 개의 캐패시터가 전자를 포집하는 동안 음으로 대전된 다른 캐패시터는 전자를 펌핑한다. 태양전지에서 여기된 전자가 정공에 재결합되기 전에 양으로 대전된 캐패시터는 태양전지로부터 더 많은 여기된 전자를 끌어온다. 이러한 까닭에 ERE 시스템은 태양전지의 효율을 증대시킨다. 연구결과로 ERE 활성 시 태양전지의 증가된 전력은 각각의 실험조건에서 5.9 W에서 25.6 W사이였고, 가장 높은 태양전지전력증가율은 ERE 비활성 시 태양전지 전력의 30.8%였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.472-480
• /
• 2014

The In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through new coordinates transformation calculating the height and azimuth of the sun.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.267-268
• /
• 2011

In order to increase the efficiency of the PV solar can get maximum power output from a control is up. But MPPT request Converter since Solar module always work MPP about out condition. This paper study of 170W stand-alone PV MPPT system for charge and discharge control system of the battery. The proposed system is a way of Flyback converters, and controls the algorithm used P&O control method and ATmega128.

• 전기전자학회논문지
• /
• 제5권2호
• /
• pp.121-127
• /
• 2001

Actual system apparatuses are necessary in order to verify the efficiency and stability of photovoltaic(PV) generation systems considering the size of solar panel, the sort of converter type, and the load conditions and so on. Moreover, it is hardly possible to compare a certain MPPT control scheme with others under the exactly same weather and load conditions as well. For the purpose of solving above mentioned difficulties in a laboratory basis, a transient simulation of PV generation system using real field weather conditions is indispensable. A straightforward simulation scheme with cost effective hardware structures under real weather conditions is proposed in this paper using EMTDC type of transient analysis simulators. Firstly, a solar cell has been modeled with VI characteristic equations, and then the real field data of weather conditions are interfaced to the EMTDC through Fortran program interface method. As a result, the stability and the efficiency analysis of PV generation systems according to various hardware structures and MPPT controls are easily possible under the exactly same weather conditions.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.537-543
• /
• 2000

표준 배터리 모듈 시스템을 위한 새로운 배터라 충.방전기를 제안한다. 전체 시스템의 크기를 줄이기 위해 충전기와 방전기의 회로가 하나의 컨버터로 구현되었으며, 최대 전력 추적을 포함한 태양전지 출략전압 제어와 태양 전지 출력과 부하 전력에 따른 배터리 충.방전 전류 제어를 동시에 수행한다. 또한, 제안된 컨버터는 부하의 전략 공급을 간단히 할 수 있는 일성 전압 버스(regulated bus)를 제공한다. 제안된 컨버터는 특성상 DCM으로 동작하므로 전듀의 첨두지가 크므로 고전력 시스템에서는 여러 개의 모듈로 사용되어야 한다.

• 태양에너지
• /
• 제18권4호
• /
• pp.67-75
• /
• 1998

Daylight illuminance are always changing. Nevertheless, when the energy savings due to daylight are calculated an accurate estimate of daylight availability is required. Where artificial lighting is photoelectrically controlled the relevant quantity is the cumulative distribution of daylight illuminance. This paper describes an experiment which measured daylight illuminance over one whole working year. Also using measured data on availability of daylight, equations are drived to predict the maximum possible savings from photoelectric controls for an interior lighting installation. The equations are applied to a space as a worked example and figures are given for the relative maximum savings in artificial lighting use of three control systems: on/off, dimming and mixed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.86-88
• /
• 2007

In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through the new coordinates transformation calculating the height and azimuth of the sun.

• 한국태양에너지학회 논문집
• /
• 제33권4호
• /
• pp.15-22
• /
• 2013

The purpose of this study is to analyse the effects of air conditioned room controlled by PMV(Predicted Mean Vote)for energy consumption and human comfort in office building. The 'EnergyPlus' was used for the evaluation of indoor thermal environment and energy consumption by the controls of room temperature and PMV. The result indicates that the PMV control could prove more profitable method for improvement of indoor thermal environment and energy conservation. Consequently, PMV control has a distinct advantage over most other control methods. An additional study is required to establish the various thermal comfort control for rooms on the basis of this work.

• 식품과학과 산업
• /
• 제49권2호
• /
• pp.18-24
• /
• 2016

Sodium chloride (NaCl) is a very important as one of major food ingredients in food industries. Recently, as the potential risk of adult diseases such as hypertension by overingestion of sodium, health authorities of many countries are executing policies for the reduction of sodium to suppress the overingestion of sodium by intake of NaCl. As general ways, the replacement of NaCl with either alternative salts, such as solar salts and minerals, for examples calcium, magnesium, potassium, lactic acid, and so on, and the addition of flavor enhancers were used to reduce the contents of sodium in foods. Recently, controls of particle size of sodium chloride or release point are emerging as new salt-manufacturing technologies for the sodium reduction. Upon reducing NaCl in foods it is important to develop practically adaptable technologies on the basis of the consideration of the unique functions of NaCl in foods, in particular effects on rheological characters, function as a humectant, shorten shelf life time, and so on.