• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.39-46
• /
• 2013

This work introduces a simple one-reactor adsorption desalination system that harnesses low temperature heat sources (solar energy, waste heat), which has been experimentally studied to elicit the most suitable design parameters and operating conditions. The design process of the system was divided into three parts to reflect the operating principle of desalination technology with application of adsorption processes. First, the evaporator for the vaporization of saline water was designed, then the reactor for the adsorption and release of the steam, followed by the condenser for condensation of the fresh water. The specific water yield is measured experimentally with respect to the time while controlling parameters such as heat source temperatures, coolant temperatures, system switching and half-cycle operational times. The present system well demonstrates the applicability of silica gel in relation to adsorption technologies that utilize low temperature heat sources ranging from 60 to $80^{\circ}C$, such as solar energy and waste heat.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.35-41
• /
• 2015

This study was conducted to develop a heat pump system to utilize waste heat within the greenhouse during the daytime in winter season. The system runs at 8 am to 6 pm for the heat storage operation, and from 6 pm to 8 am of the next day for the heat radiant work. In the case of the heat storage operation, the average solar radiation was $168.3W/m^2$ with $16.3^{\circ}C$ outside temperature. The $COP_s$ of the system shows 4.59 in this operation mode. When the temperature goes up to $18.6^{\circ}C$, the system $COP_s$ reached at 5.10. On the other hand, the $COP_h$ of the system in heat radiation mode shows 2.63. In this case, the inside of the greenhouse temperature was reaches at $24.7^{\circ}C$ when the outside temperature was $12.9^{\circ}C$.

• 태양에너지
• /
• 제18권4호
• /
• pp.23-32
• /
• 1998

Fuel cells supply electric power and heat at work, and their exhaust gas is comparatively clear. So they are in the limelight as one of the co-generation systems which behave friendly with the environment. Fuel cells discharge both steam and hot water. Accordingly, if we combine absorption heat pump driven by waste heat with fuel cells, we can construct an advanced energy conserving system. The purpose of this study is the objective for evaluating the possibilities of effectively utilizing waste heat of fuel cells as a heat source for the single and double effect absorption systems. Simulation studies on single and double effect absorption have been performed for water/lithium-bromide pair. The effectiveness of introducing a waste heat source of fuel cells is demonstrated. The result of this study showed that total efficiency was about 85% at rated operation and about 75% at 75% load operation. Absorption cycle moved to more strong concentration when fuel cell operated at 75% load.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.101-105
• /
• 2016

After a weight-rate disposal system for food waste has been implemented we have to install the food waste system at all apartment. In this paper, we supplied electric energy to the food waste system using solar heat panels. The weight of the food waste is displayed on the LCD panel, and its price is calculated based on its weight. Since there would be some cases that touch-typed card can't be well recognized if it is contaminated by foreign material, we designed a recognition device by no-touch sensitive card reader to embody the food waste system. The food waste system was designed using a GUI(graphical user interface) so that users can easily understand it.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.204-209
• /
• 2011

According to the environment report of UN, korea was classified as potable water shortage countries. Approximately 71% of the Earth's surface is covered by ocean. However, it is difficult to use for industry of residential purpose without a certain processing. The development of solar and waste-heat used absorption desalination technology have been examined as a viable option for supplying clean energy. In this study, the modelling of the main devices for solar and waste-heat used and adsorption desalination system was introduced. The design is divided into three parts. First, the evaporator for the vaporization of the top water is designed, and then the reactor for the adsorption and release of the steam is designed, followed by the condenser for the condensation of the fresh water is designed. In addition, new features based on the energy balance are also included to design absorption desalination system. In this basicresearch, One-bed(reactor) adsorption desalination plant that employ a low-temperature solar and waste energy was proposed and experimentally studied. The specific water yield is measured experimentally with respect to the time controlling parameters such as heat source temperatures, coolant temperatures, system switching and half-cycle operational times.

• 대한기계학회논문집B
• /
• 제37권12호
• /
• pp.1061-1068
• /
• 2013

본 연구에서는 선행연구에서 제시된 태양열원식 해수 담수기 모델에 디젤 발전기 폐열을 적용하였을 때 설계변수에 따른 담수량을 수치해석을 통하여 예측하고, 최적설계를 위한 자료를 제시하고자 하였다. 선행연구를 기초로 수학적 모델을 설정하였고, 폐열 회수관으로부터의 열교환량을 고려하였다. 해석의 결과를 선행연구의 결과와 비교 분석하여 해석의 타당성을 확보하였고, 타당성이 검증된 해석모델을 적용하여 여러 가지 설계 변수에 따른 담수량을 예측하였다. 결과적으로 선행연구와 전반적으로 일치한 해석결과를 확인하였고, 디젤 발전기 폐열을 적용하였을 때 담수량 향상정도를 확인하였다. 또한 수치해석을 통하여 최적의 효용단 수, 유리덮개 경사각 등을 결정하였다.

• 자원리싸이클링
• /
• 제31권5호
• /
• pp.52-58
• /
• 2022

태양광 폐실리콘 웨이퍼에서 회수한 실리콘과 카본블랙을 활용하여 탄화규소 분말을 제조하였다. 태양광 발전시장에서 결정질 실리콘 모듈이 90% 이상을 차지한다. 태양광 모듈의 사용기한이 도래함에 따라 환경과 경제적인 측면에서 실리콘을 회수하고 활용하는 기술은 매우 중요하다. 본 연구에서는 태양광 폐패널에서 회수한 실리콘을 탄화규소 원료로 활용하기 위하여, 순도 95.74% 폐실리콘 웨이퍼로부터 정제과정을 거쳐 99.99% 실리콘 분말을 회수하였다. 탄화규소 분말 합성특성을 살펴보기 위하여, 정제된 99.99% 실리콘 분말과 탄소분말을 혼합한 후, Ar 분위기에서 열처리(1,300℃, 1,400℃, 1,500℃)과정을 수행하였다. 실리콘과 탄화규소 분말의 특성을 입도분포, XRD, SEM, ICP, FT-IR 및 Raman 분석기를 사용하여 분석하였다.

• Advances in Energy Research
• /
• 제4권1호
• /
• pp.29-45
• /
• 2016

There has been a growing interest in the recent time for the development of solar power tower plants, which are mainly used for utility scale power generation. Combined heat and power (CHP) is an efficient and clean approach to generate electric power and useful thermal energy from a single heat source. The waste heat from the topping Brayton cycle is utilized in the bottoming HRSG cycle for driving steam turbine and also to produce process steam so that efficiency of the cycle is increased. A thermal storage system is likely to add greater reliability to such plants, providing power even during non-peak sunshine hours. This paper presents a conceptual configuration of a solar power tower combined heat and power plant with a topping air Brayton cycle. A simple downstream Rankine cycle with a heat recovery steam generator (HRSG) and a process heater have been considered for integration with the solar Brayton cycle. The conventional GT combustion chamber is replaced with a solar receiver. The combined cycle has been analyzed using energy as well as exergy methods for a range of pressure ratio across the GT block. From the thermodynamic analysis, it is found that such an integrated system would give a maximum total power (2.37 MW) at a much lower pressure ratio (5) with an overall efficiency exceeding 27%. The solar receiver and heliostats are the main components responsible for exergy destruction. However, exergetic performance of the components is found to improve at higher pressure ratio of the GT block.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.607-613
• /
• 2010

도서지역에서 많이 사용하고 있는 소형 발전기의 폐열을 열원으로 이용하는 소용량 자급형 해수담수화장치의 설계 자료와 성능실험 결과를 제시하였다. 제안된 담수기는 조밀간격 수직형 평행평판이 복수단으로 구성된 다중효용방식으로서, 해수가 흐르는 윅(wick)이 부착되어 있다. 복수단의 평판에서 증발과 응축과정이 반복적으로 일어나므로 열에너지를 재이용하게 되어 담수생산량을 증가시킨다. 제안된 담수기의 성능실험 결과 5.6 kVA 발전기의 폐열이 담수화의 증발열원으로 사용될 수 있음을 알 수 있었고, 1중 효용만으로 최소 6.7 kg/day의 담수를 생산할 수 있었다. 이 결과는 10중 효용의 경우 약 35~44 kg/day를 기대할 수 있는 양으로서, 동일 전열면적의 태양열 증류기의 일일 최대 생산량보다 약 16~4배 많은 것이다.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.80-84
• /
• 2011

The cycle performance of closed ocean thermal energy conversion (OTEC) system with 50 kW gross power was evaluated to obtain the basic data for the optimal design of OTEC using waste heat such as solar power, discharged heat from condenser of power plant. The basic thermodynamic model for OTEC is Rankine cycle, and the surface seawater and deep seawater were used for the heat source of evaporator and condenser, respectively. The cycle performance such as efficiency, heat exchanger capacity, etc. was analyzed on the variation of temperature increase by waste heat. The cycle efficiency increased and necessary capacity of evaporator and condenser decreased under 50kW gross power with respect to the temperature increase of working fluid. Also, when the temperature increase is about $13.5^{\circ}C$, the heat which can be used is generated. By generator with 0.9 effectiveness under the simulated condition, the cycle efficiency was improved approximately 3.0% comparing with the basic cycle.