• 태양에너지
• /
• 제19권1호
• /
• pp.1-8
• /
• 1999

Electrochromic $WO_3$ thin films were prepared by electron beam deposition. The transmission and durability of films were investigated. Coloring and bleaching experiments were repeated in an electrolyte of propylene carbonate with 0.6M of $LiClO_4$ by cyclic voltammetry. Spectrophotometer was used to measure the transmission in the degraded films. The 5000 ${\AA}$ thick film was found to be the stable after repeated cycles. The durability of the annealed film also showed improvements over unannealed samples. Tungsten oxide films with titanium content of about $10{\sim}15$ mol% was found to be most stable, undergoing the least degradation during the repeated cycles.

• Current Optics and Photonics
• /
• 제4권5호
• /
• pp.441-445
• /
• 2020

A novel design for a Fresnel lens for a solar end-pumped laser is demonstrated in this paper. The new hybrid Fresnel lens includes two parts, inner and outer. The inner part is a twice-total-internal-reflection and vertical-transmission lens. The outer part is a once-total-reflection and vertical-transmission lens. The radius of the Fresnel lens is 600 mm, and its focal length is 750 mm. The concentrating performance of the Fresnel lens is examined using TracePro. The results show that the concentration efficiency has been greatly improved. The total concentration efficiency of the hybrid Fresnel lens reaches 73.2% when the radius of the laser rod is 3 mm. This design can simplify the concentration system of a solar end-pumped solid-state laser.

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.55-63
• /
• 2004

빛이 입사각별로 태양투과율이 제어되어지는 첨단 창과 같은 물체를 통과할 때 투과되는 성분은 직달투과와 산란투과성분으로 볼 수 있다. 직달투과는 물체를 통과하면서 일정한 방향으로 굴절되어 투과되는 성질을 말하고, 산란투과는 직달투과를 제외한 나머지 방향의 성분들의 형태를 말한다. 이러한 첨단 창의 냉난방부하에 미치는 에너지성능을 평가하기 위해서는 산란투과에 대한 정보가 필요하고, 이에 대한 물리적 변수는 입사각, 출력각, 양방향 투과율 분산함수인 BTDF로 정의된다. 본 논문에서는 3개의 서로 나른 첨단 창 (1) $42^{\circ}/5^{\circ}$ 프리즘 창 판넬, (2) 레이저 컷 판넬 (3) $45^{\circ}$ 프리즘 3M 필름의 BTDF 데이터 획득을 위한 실험 방안을 소개하고, 실험을 통해 획득한 정보를 이용하여 계산식과 비교 검증을 하였다. 따라서 이 검증된 방안을 이용하여 지역별 냉난방 부하를 최소화 할 수 있는 입사각별로 태양 투과율 제어 판넬을 선정할 수 있게 되었다.

• 대한원격탐사학회지
• /
• 제36권6_1호
• /
• pp.1435-1447
• /
• 2020

국지 지역에 대한 기상변수의 계절적인 변화는 해당 지역의 대기 투과 특성에 크게 영향을 미친다. 본 연구에서는 대기 환경의 국지적 특성이 매우 큰 지역에 대한 대기투과율과 일사량의 정밀 결정을 위해 새로운 다중회귀 증강 알고리즘을 제안한다. 이 방법은 1) 관측된 기상자료를 사용하는 적응형 대기모델 선정 및 2) 통상적인 MODTRAN의 대기투과율 계산에 추가하여 다중선형회귀모델을 사용한다. 2018년 청명일에 해당하는 태안 연안의 기상자료에 이 새로운 알고리즘을 적용하여 계산된 일사량을 관측자료와 비교하였다. 측정과 계산 사이의 일사량 차이가 89.27 ± 48.08σ W/㎡ (표준 MODTRAN 계산)에서 21.35 ± 16.54σ W/㎡ (증강 다중회귀 알고리즘)로 약 70% 이상 개선되었다. 본 연구에서 제안한 이 새로운 방법론은 대기 환경 조건의 변화가 심해 국지적 특성이 매우 큰 지역의 일사량 및 대기 투과 특성을 정확하게 추정하고 이러한 지역에 대한 원격탐사 자료의 대기 보정 작업에서 유용한 도구가 될 수 있을 것이다.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.481-489
• /
• 1994

The $SnO_2$/(n)Si solar cell was fabricated by electron beam evaporation method, and their properties were investigated. In proportion to increase of substrate and annealing temperature, the conductivity of $SnO_2$ thin film was increased, but its optical transmission decreases because of increasing optical absorption of free electrons in the thin film. $SnO_2$/Si Solar cell characteristics were improved by annealing, but the solar cells was deteriorated by heat treatment above 500[.deg. C]. The optimal outputs of $SnO_2$/Si solar cell through above investigations were $V_{\var}$:350[mV], $J_{sc}$ ;16.53[mA/c $m^{2}$], FF;0.41, .eta.=4.74[%]

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.584-587
• /
• 2006

An energy generating greenhouse based on fluoropolymer envelope and fresnel lens is proposed. The outstanding properties of the fluoropolymer films make them very suitable for large scale solar applications. Extremely high optical transmission over the whole solar spectrum, combined with mechanical strength, and durability allows us to design a highly optimized greenhouses for both plant growing and energy generation. Systems such as photovoltaic triple junction cells are especially attractive since they have up to 35% efficiency with much less cell material when the sun beam is focused with concentrators such as fresnel lenses. Cooling such devices will enhance the efficiency and provide useful thermal energy that could be further utilized for various applications depending on the local demands. This article introduces the basic ideas and principles of the energy generating greenhouses as a first step towards the actual deployment of such systems under Korean environment.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.157-164
• /
• 2011

Hybrid car can improve fuel efficiency using a power of motor that is generated during constant-speed or deceleration driving. The motor is located between engine and transmission. But, when voltage of main battery is low, fuel efficiency is low because the voltage can't run the motor. In this situation, this study observed fuel efficiency when using solar cell for assistance power. In order to verify a fuel consumption of hybrid car equipped solar cell for assistance power, the car was tested downtown driving. As hybrid car was equipped solar cell for assistance, fuel consumption was reduced 8.35 % at running air conditioner. And, at air conditioner doesn't work, fuel consumption was reduced 6.88 %. This point of view, CO2 is expected to reduce in similar proportion.

• 한국항행학회논문지
• /
• 제18권1호
• /
• pp.35-43
• /
• 2014

본 논문은 무선 전력 전송에 관한 이론을 토대로 송신부와 수신부의 두 개의 평면 코일 사이의 자기 유도 원리의 다양한 조건 변화에 따른 무 접촉 무선 전력 전송에 관한 연구이다. 실험은 무 접촉 방식으로 전력을 전송 할 수 있는 송신부인 1차 측 코일과 수신부인 2차 측 코일 및 하프브리지 직렬 공진 컨버터를 적용한 무선 전원 장치의 송신부 회로와 수신부회로의 출력 전압 및 전원을 계산할 수 있는 환경을 마련해 주었다. 송신부의 유도 결합 공진 컨버터의 주 전원은 태양광 전지 모듈과 대체 광원으로서 인공 광원(할로겐 램프)을 이용하여 전기 에너지로 변환 시켜 사용하였으며 태양광 발전으로부터 공급받은 24 V 전원을 무선 전력 전송 장치를 위한 입력 전원으로 사용하였다. 실험 결과, 전달 받은 전력은 수신부 회로에서 조명을 밝히거나 배터리를 충전하는데 사용된다. 그리고 송신부의 출력 측에서 측정을 통해 수신부의 입력 전력과 비교하여 무선 전력 전송 효율은 약 70~89%로 나타났다. 또한 이 논문을 위해서, 무선 전력 전송 시 이물질이 간섭하였을 때, ID 검증 방식과 전압의 위상차 비교 방법을 통해 효율성 실험을 하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.331-336
• /
• 2012

Nowaday the conventional solar collector material prices are rising up because of pricy metal material over the world. The solar collector is too expensive to recycle to save the earth. Advanced polymer research is founded a high thermal resistant polymer and also it has high sun energy transmission. It also has cheaper material and easy manufacturing process, compare with conventional solar collector material. This paper is focussing on glazing simulation of polymer solar collector against wind pressure. The modeling geometry of polymer solar glazing are purposed by single layer, double layer hollow, zig-zag and tower. A simulation by using the Finite Volume was conducted to get Factor of Safety (FoS). The purpose of this paper is to find the best polymer glazing design, which can be as reference for the solar collector company to build Polymer. Hope fully new model of polymer solar collector has cheap, light, high sun energy transmitter, easy to be made and strong against wind force characteristics.

• 적정기술학회지
• /
• 제5권1호
• /
• pp.8-17
• /
• 2019

Solar pumps, for water lift systems, is becoming popular in rural areas for supplying drinking water in dry seasons when its need is elevated. The development in technology has also made solar pumps readily available and cheap which has increased its demands. So, for scattered settlements having a limited budget for operation and maintenance costs, solar pump is preferred over grid connected electrical pumping systems. This primary objective of the study was to design a solar photovoltaic pumping drinking water supply system for a small health post which is about 45 km east from Kathmandu, the capital city of Nepal. The study also compared and verified the final design with the system's existing design prepared by a development agency. The water source for this study was a confined aquifer 115m below the surface. The water demand was calculated to be 11m³ per day. A 1500 kPa submersible pump attached to a motor was selected and installed. Along with that twelve solar panels, reservoir, transmission main and distribution main was designed. The outcomes conclude solar photovoltaic pumping water supply systems to be cost-effective with an estimated cost of only USD 0.84 million per MLD. Solar pumps require low maintenance and operation costs and its repairs can quickly be done by the local people. The study also shows that solar technology produces no sound, needs no fuel making it environmentally friendly.