• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.42-45
• /
• 2004

High quality CdTe single crystal for the solar cell fabrication was grown by vertical Bridgman method. The etch pits patterns of {111}surfaces of CdTe etched by Nakagawa solution was observed the {111} A composed of Cd atoms with typical triangle etch pits of pyramid mode. From the photoluminescence measurement on {111}A, we observed free exciton($E_x$) existing only higy quality crystal and neytral acceptor bound exciton($A^0$,X) having very strong peak intensity. Then, the full width at half maximum and binding energy of neutral acceptor bound exciton were 7 meV and 5.9 meV, respectively. By Haynes rule, an actibation energy of impurity was 59 meV. Therefore, the origins on impurity level acting as a neutral acceptor were associated Ag or Cu elements.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.329.1-329.1
• /
• 2014

In this paper, we report electrical, optical and structural properties of Al-doped zinc oxide (AZO) thin films deposited at different substrate temperatures and pressures. The films were prepared by radio frequency (RF) magnetron sputtering on glass substrates in argon (Ar) ambient. The X-ray diffraction analysis showed that the AZO films deposited at room temperature (RT) and 20 Pa were mostly oriented along a-axis with preferred orientation along (100) direction. There was an improvement in resistivity ($3.7{\times}10^{-3}{\Omega}-cm$) transmittance (95%) at constant substrate temperature (RT) and working pressure (20 Pa) using the Hall-effect measurement system and UV-vis spectroscopy, respectively. Our results have promising applications in low-cost transparent electronics, such as the thin-film solar cells and thin-film transistors due to favourable deposition conditions. Furthermore our film deposition method offers a procedure for preparing highly oriented (100) AZO films.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.83-84
• /
• 2016

Surplus water inside a concrete other than moisture that is used for hydration of the cement affects the physical properties of the concrete (modulus of elasticity, compressive strength, drying shrinkage, and creep) by drying. Changes in temperature and humidity inside a concrete has correlation with the movement speed and reaction rate of deterioration factors such as carbon dioxide and chloride ions. In this study, comparison was performed between temperature and relative humidity inside the concrete and meteorological data for exposure environment through measurement at the site for two years. Surface temperature of the concrete (depth 1cm) was measured higher by 6℃ during the summers, while it was measured lower by 2℃ during the winters due to solar radiation, wind, and radiation cooling. As for relative humidity, change was large in the depth of 1cm, while more than 85% was maintained in the depth of 10cm.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.92-97
• /
• 2011

Nowdays the most critical problem is global warming and the most important reason is the high emition of carbondioxide. 23% of the use of carbondioxide is used in building and decreasing the use of it is very important. One of the biggest factor that can decrease the use of energy is developing the heat conducting ratio of the materials we use in building. Heat conducting ratio is the important factor in the use of reducing energy comsumation. In this research, there are methods about how to measure the heat conducting ratio, and the existing the representing measuring method which is Heat Flow Meter HFM 436, Laser Flash Analysis and find out about the TCi of the new method C-Therm and compare the results.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.168-173
• /
• 2011

Recently, from a saving energy and environmental lighting sources point of view, using LED lighting have been increased rapidly. The colors of light was applied to the control of dimmers that is composed of red, green, blue, and white(RGBW) to improve the quality of visual environment. Moreover this study has been processed to develop adjustable dynamic LED lighting system on SPD and definitize the various spectral power distribution and color temperature of light through the control of the four dimmers. It is possible to combine up to $432^4$ kinds of light. Measurement of illuminance of range on working surface was as 7~l,831 lux. Application of visual environment for occupants can be expected according to control of lighting performance.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.130-133
• /
• 2011

This paper reports the Survey results from a field monitoring study of office occupancy densities. The field measurement of a office in Yongin was carried out from 19 September to 30 September 2011. The survey has an aim to reveal the building energy consumption relationship between occupancy densities of a realistic office and the previous studies. The results showed that hourly occupied density of the previous studies is more higher than a field survey. we investigated the effects of difference occupancy densities on annual heating and cooling energy consumption using EnergyPlus. Heating and cooling consumption was raised because of the increased occupancy density. therefore, accurately measure the occupnacy schedule is important in order to reduce excessive building energy consumption, and is an significant element to be considered in the energy simulation.

• 대한설비공학회지:설비저널
• /
• 제5권3호
• /
• pp.178-197
• /
• 1976

Based on the measurement data on Radiation on a Horizontal Surface at 84 different areas in South Korea which were collected and recorded by the Central Meteorological Office, the average values in the period of 5 years from 1971 thru 1975 at 12 particular areas of Gangreung, Gyeongju, Gwangju, Gimhae, Mogpo, Seoul, Iri, Jeju, Jinju, Cheongju and Chungju are indicated in this report. For above 12 areas the following data have been obtained and are indicated in each tables. Annual totalization of Radiation on a Horizontal Surface and its yearly averaged daily totalization$cdots$Table 1. Monthly totalization of Radiation on a Horizontal Surface and its monthly averaged daily totalization$cdots$Table 2 Maximum and minimum values of daily totalization of Radiation on a Horizontal Surface$cdots$Table 3 Daily variation of monthly averaged Radiation on a Horizontal Surface$cdots$Table 4 thru 15 Decade averaged Radiation on a Horizontal Surface$cdots$Table 16 thru 27

• 천문학회지
• /
• 제45권1호
• /
• pp.19-24
• /
• 2012

Microthermal fluctuations are introduced by atmospheric turbulence very near the ground. In order to detect microthermal fluctuations at Fuxian Solar Observatory (FSO), a microthermal instrument has been developed. The microthermal instrument consists of a microthermal sensor, which is based on a Wheatstone bridge circuit and uses fine tungsten filaments as resistance temperature detectors, an associated signal processing unit, and a data collection, & communication subsystem. In this paper, after a brief introduction to surface layer seeing, we discuss the instrumentation behind the microthermal detector we have developed and then present the results obtained. The results of the evaluation indicate that the effect of the turbulent surface boundary layer to astronomical seeing would become sufficiently small when installing a telescope at a height of 16m or higher from the ground at FSO.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.241-245
• /
• 2009

The dry wall using steel stud is used to buildings in the inside and outside of the country because it has the merit that application is possible to various architecture. The purpose of this study is to measure thermal performance of dry wall which uses steel stud transformed one by using measurement equipment to decrease heat bridge of steel stud and ensure heat performance as dry wall. As a comparative performance test result, dry wall which uses steel stud transformed one has a performance enhancement compare with the dry wall using general steel stud.

• 한국표면공학회지
• /
• 제26권5호
• /
• pp.255-262
• /
• 1993

Major parameters determining the extent of Ca utilization were investigated for their calcination/sulfation behavior of limestone in the AFBC(Atmospheric Fluidized Bed Combustion) environments. Three different particle sizes of Fredonia limestone were investigated in the lab-scale tubular reactor. The results of the calcination codnversion of limestone imply that thesd decomposition rate of CaCO3 into CaO is dependent on the amount of heat which limestone absorbed. Hg porosimeter measurement of calcined limestone illustrated that surface area and pore volume are increased with decreasing particle size. Raw Fredonia limestone and sequentially as well as simultaneously calcined/sulfated limestones were also examined using SEM. The SEM Studied showed that the surface of the calcined limestone particles is more diffusive nature than that of the parent calcite. However, the sulfur distribution pattern of simultaneously-treated particles and that of the se-quentially-treated one shows no difference.