• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.319-324
• /
• 1998

Sol-gel derived phosphate water-sioluble glasses containing Cu were prepared. Powder-shape of glasses were added in D.I water used polyethylene bottle. After solution contained glass powder were submerged in water bath on 25$^{\circ}C$ their dissolution behavior/characteristics bactericidal effect and cytotoxicity test were evaluated. The maximum amount of Cu(35 mol%) via sol-gel method was more 5 mol% increased than that with melting process. The stage of total dissolution was more dominant than that of selective leaching dur-ing dissolution due to dissolved amount of glasses increased linearly with time. The ratio of Cu+ to {{{{ {Cu }^{2+ } }} was 3:7 so that the structure of glasses is more predominant 2-dimension chain structure than 3-dimenshion po-lymeric structue. The stage of total dissolution was more dominant than that of selective leaching during dissolution. Bactericidal effect against all bacteria showed that solutions which contained 40 ppm and 100 ppm of Cu killed 80 percentages of bacteria within 2 hours and 100 percentages of those within 12 hours. The results of cytotoxicity test for L929 cells showed no cytotoxicity were observed within 96 hours for dis-solved solution that contains 40 ppm and 100 ppm of Cu.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.15-19
• /
• 1998

이 연구의 목적은 lead zirconate 박막을 sol-gel 법으로 제작하는데 있어 Pb와 Zr의 혼합비에 따라 결정의 형성에 있어서 변화와 이에 따른 결정의 성장 선호 방향을 조사하였다. 기판으로는 Pt/Ti/$SiO_2$/Si를 사용하였으며, 결정 형성을 위한 온도는 $800^{\circ}C$로 1분간 유지하였다. Pb가 부족할 경우는 <221>방향으로의 성장이 두드러지고, Pb가 화학당량적 비를 만족한 이후는 <100>와 <221>이 같이 성장하게 된다. 그러나 이들은 모두 반강유전체로서의 특성을 나타내지만 뚜렷한 domain switching을 나타내지는 않는다.

• 한국응용과학기술학회지
• /
• 제21권2호
• /
• pp.140-147
• /
• 2004

An aqueous solution of a commercial liquid synthetic detergent for kitchen use was photodecomposed in the presence of titanium dioxides powder under an atmosphere of air at room temperature. Titanium dioxides were prepared by sol-gel method from titanium iso-propoxide at different R ratio($H_2O$/titanium iso-propoxide) and calcined at $500^{\circ}C$. All titanium dioxides were characterized by XRD, BET surface area analyzer and UV-VIS spectrometer. The surface area of titanium dioxides prepared at R ratio=6 appeared higher volume about 20% than commercial $TiO_2$ catalysts. XRD patterns of titania particles were observed mixing phase together with rutile and anatase type. Titanium dioxides prepared by sol-gel method show higher activity about 6% than commercial $TiO_2$ catalysts on the photocatalytic degradation of a commercial liquid synthetic detergent for kitchen. The concentration of the detergent decreased to about 90% of its initial value at illumination times of 2 hour. Illumination for 30 minutes decreased the concentration of oxygen to about one-fifth of the initial value.

• 대한전기학회논문지
• /
• 제44권7호
• /
• pp.914-918
• /
• 1995

In this study, Pb(Zr$_{x}$ Ti$_{1-x}$ )O$_{3}$ (x=0.65, 0.52, 0.35) thin films were fabricated by Sol-Gel method. A stock solution with excess Pb 10[mol%] of Pb(Zr$_{x}$ Ti$_{1-x}$ )O$_{3}$ was made and spin-coated on the Pt/SiO$_{2}$/Si substrate at 4000[rpm] for 30[sec.]. Coated specimens were dried on the hot-plate at 400[.deg. C] for 10[min.]. Sintering temperature and time were 500~800[.deg. C] and 1~60[min.]. The coating process was repeated 6 times and the final thickness of the thin films were about 4800[A]. To investigate crystallization condition, PZT thin films were analyzed with sintering temperature, time and composition by the XRD. The microstructure of thin fulms were investigated by SEM. The ferroelectric perovskite phases precipitated under the sintering of 700[.deg. C] for 1 hours. In the PZT(52/48) composition, dielectric constant and dielectric loss were 2133, 2.2[%] at room temperature, respectively.ively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.155-159
• /
• 2003

The preparation and luminescence characterization of yttrium oxide doped with trivalent europium phosphors by sol-gel method have been investigated. Aqueous metal nitrate solution was mixed with EDTA which was chosen by the most suitable material of sol-gel formation one of appled various chelating agents. we noticed that the samples when are heated with EDTA at a temperature of $100^{\circ}C$ for 1hrs, produced brownish and crisp powders due to condensation reaction on decomposition, dehydration and formation of sol-gel. Hence, when the powder pre-heated was then heated at $1200^{\circ}C$ for 3hrs in atmosphere, the luminescence characterization of resultant $Y_{2}O_{3}:Eu^{3+}$ phosphor was enhanced upto maximum 30% significantly than conventional method through increasing porous region and decreasing particle sizes.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.233-240
• /
• 2001

The transparent organic-inorganic hybrid films were prepared by the Sol-Gel process. PVP(polyvinylpyrrolidone) was used in organic component and TEOS(tetraethoxysilane) was used in inorganic component. HCI, $CH_{3}COOH$, and $NH_{4}OH$ were used as the Sol-Gel catalyst. The characteristics according to not only the variation of organic and inorganic contents but also the variation of catalyst species and contents were investigated. On the whole, the compatibility was remained between organic and inorganic components, and also as the TEOS contents were increased, mostly the transparency and the mechanical, thermal properties were improved. In addition, as content of catalysts was increased, the films showed characteristics that were closer to PVP than silica. Although the transparency of films was preserved in HCI and $CH_{3}COOH$, only the film containing more than 40wt% TEOS in $NH_{4}OH$ showed different phenomena.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.307-314
• /
• 1998

졸-겔법을 이용하여 PZT박막을 제조하였다. 출발물질로는 Pb-acetate trihydrate, Zr-normal propoxide와 Ti-ispropoxide를 사용하였으며, 용매로는 2-Methoxyethanol과 iso- Propanol을 사용하였다. 기판에 따른 Pb 이온 및 Si 이온의 확산을 고찰하기 위해 bare Si와 열산화된 $SiO_2/Si$ 그리고 산화된 기판 위에 졸-겔 spin-coating법으로 $TiO_2$를 입힌 $TiO_2/SiO_2/Si$ 기판을 사용하였다. 박막의 치밀화 및 기판과의 접착상태는 SEM을 이용하였고, 상생성 온도는 XRD, 그리고 Pb 이온 및 Si 이온의 확산 정도는 ESCA를 사용하였다. 기판으로 bare Si 및 $SiO_2/Si$를 사용한 경우, $700^{\circ}C$에서 perovskite상을 얻을 수 있었으며, SiO2/Si 기판을 사용하여 Si의 막으로의 확산을 다소 방지할 수 있었다. $TiO_2/SiO_2/Si$기판을 사용한 경우, $500^{\circ}C$에서 perovskite상을 얻을 수 있었고, Pb 이온 및 Si 이온의 확산을 방지할 수 있었다.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.893-900
• /
• 1999

Silica films were prepared on Si single crystal substrates by sol-gel process using TEOS as starting materials. Films were fabricated by a spin coating technique. Sol solutions were prepared by varying the compositions of CH3OH, H2O and DMF with fixed molar ratio of TEOS=1, HCl=0.05(mol). Wetting behavior viscosity of solutions gelation time thickness of films and cracking behavior were investigated with the various solution compositions. Wetting behaviors of solutions depended on the solution compositions mixing method and mixing rate. The optimum composition of sol was TEOS : DMF ; CH3OH: H2O :HCl=1:2:4:4:0.05(mol) and the mixing rate of solution was optimized at 1 ml/min. Viscosity of solutions were controlled by choosing a reaction time(elapsed time after mixing) at a room temperature so that we could get up to 800nm thick film The surface roughness was getting poor when thickness of films was thicker than 500nm. Thickness of coated films were increased with decreasing amount of CH3OH. The best surface roughness was obtained at the content of CH3OH 4 mol. The shortest gelation time was obtained with the content of CH3OH 8 mol. Crack-free filkms were fabricated when sintered at 500$^{\circ}C$ for 1 hr with heating rate of 0.6$^{\circ}C$/min.

• 한국세라믹학회지
• /
• 제42권9호
• /
• pp.618-623
• /
• 2005

HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.101-105
• /
• 2014

In this work, Zinc ferrite nanoparticles have been prepared by various methods, conventional (ZC), mechanochemical processing (ZM) and Sol-Gel (ZS) method, to compare their structural and magnetic properties. The cation distribution obtained from XRD shows the degrees of inversions are 4%, 14.8%, and 16.4% from the normal $ZnFe_2O_4$ structure. Fourier transform infrared spectroscopy (FT-IR) confirms changes in cation distribution of $ZnFe_2O_4$ fabricated by sol-gel and mechanochemical processing. The $^{57}Fe$ M$\ddot{o}$ssbauer spectra of the samples were recorded at room temperature. The spectra exhibit a line broadening. The magnetic properties of the samples were studied by vibration sample magnetometer (VSM) at room temperature and the results show that the sample ZM has ferrimagnetic behaviour.