• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.115-116
• /
• 2006

Dielectric PST (20/80) / PST (80/20) heterolayered thin films structures were created by a consequent deposition of the PST (20/80) and PST (80/20) thin films on the $Pt/Ti/SiO_2/Si$ substrate using alkoxide-based sol-gel method. Both structural and dielectric properties of heterolayered PST thin films were investigated for the tunable microwave device applications. As the number of coating increases, the lattice distortion decreased. It can be assumed that the lower PST layer affects a nucleation site or a seeding layer for the formation of the upper PST layer. The dielectric constant, dielectric loss and tunability of the PST-6 heterolayered structure measured at 100 kHz were 399, 0.022 and 57.9%, respectively. All these parameters showed an increase with increasing number of coatings due to the decrease in lattice distortion.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1515-1519
• /
• 2005

Tungsten oxide-modified TiO2 thin films were formed on a glass substrate by sol-gel and dip coating processes using acetyl acetone as a chelating agent. The hydrophilic properties of the thin films were investigated with illumination of UV light. The dependence of water contact angle on material composition and morphology of the film is established with SEM image and AFM profile. The surface morphology was controlled with the change of precursor concentration. 0.01 M of tungsten oxide-modified Ti$O_2$ have shown the highest hydrophilicity after UV-irradiation. The effect of composition on photoinduced hydrophilicity of the W$O_3$-Ti$O_2$ films was also investigated. The films were characterized by XRD, SEM, AFM and XPS.

• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.579-585
• /
• 2009

Solid-phase microextraction (SPME) has gained widespread acceptance in sample pretreatment due to its solvent-free and easy-to-operate properties. SPME fibers are considered as a key part of SPME technique, since it primarily determines the extraction performance of the method including sensitivity, selectivity, and reproducibility. Generally speaking, target analyte with different chemical property requires fiber coating that has the best affinity towards it. Due to the lack of varieties of commercial fibers available currently, considerable efforts have been recently made to develop tailor-made fibers to fulfill increasing demands of different analysis. This paper concisely classify some SPME fiber preparation approaches such as sol-gel technology, physical deposition, molecularly imprinted technique, and their respective application in food safety analysis.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1296-1299
• /
• 2012

$YBa_2Cu_3O_{7-x}$ thin films were fabricated by the spin-coating method on $SiO_2$/Si substrate using an alkoxide-based sol-gel method. The structural and electrical properties were investigated for various 1st annealing temperature. Due to the formation of the polycrystalline single phase, synthesis temperature was observed at around $720^{\circ}C-800^{\circ}C$. $YBa_2Cu_3O_{7-x}$ thin films with the 1st annealing temperature of $450^{\circ}C{\sim}500^{\circ}C$ showed the single XRD patterns without the second phase, such as $YBa_2Cu_4O_8$. The thickness of films was approximately $0.23{\mu}m{\sim}0.27{\mu}m$. Aerage grain size, resistance and temperature coefficient of resistance (TCR) of $YBa_2Cu_3O_{7-x}$ thin films with the 1st annealing temperature of $500^{\circ}C$ were $0.27{\mu}m$, $59.7M{\Omega}$ and -3.7 %/K, respecvitely.

• 에너지공학
• /
• 제25권2호
• /
• pp.65-78
• /
• 2016

광촉매 연구의 초기는 태양에너지의 전환 및 저장에 관련된 분야들로부터 개발되어 왔다. 최근에는 광 또는 광촉매의 존재 하에서 자외선을 조사하여 물의 정제 및 폐수처리와 각종 유기화합물의 분해연구가 활발하게 진행되고 있다. 또한 산화물질-카본나노튜브, 그래핀 나노복합체 등이 광촉매물질로서 연구되고 있다. 이와 같은 복합체는 열적, 화학적으로 안정하기 때문에 플렉서블 소자를 포함한 광분해 태양전지 및 나노전자 소자를 구성하는 재료로서 적당하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.190-190
• /
• 2010

Zinc oxide is the most attractive material due to the large direct band gap (3.37 eV), excellent chemical and thermal stability, and large exciton binding energy (60 meV). Recently, ZnO nanorods were used as the high efficient antireflection coating layer of solar cells based on silicon (Si). In this reports, we studied the effects of rapid thermal annealing (RTA) treatment on optical properties of ZnO nanorods. For fabrication of ZnO nanorods, there are many methods such as hydrothermal method, sol-gel method, and metal organic chemical vapor deposition method. Among of them, we used the conventional wet chemical method which is simple and low temperature growth. In order to synthesize the ZnO nanorods, the ZnO films were deposited on Si substrate by RF magnetron sputtering at room temperature and the samples were dipped to aqua solution containing the zinc nitrate and hexamethylentetramines (HMT). The synthesis process was achieved in keeping with temperature of $90-95^{\circ}C$ and under constant stirring. The morphology of ZnO nanorods on glass and Si was characterized by scanning electron microscopy. For the analysis of antireflection performance, the reflectance and transmittance were measured by spectrophotometer. And for analyzing the effects of RTA treatment on ZnO nanorods, crystalline properties were investigated by X-ray diffraction measurements and optical properties was estimated by photoluminescence spectra.

• Food Science and Biotechnology
• /
• 제17권6호
• /
• pp.1345-1348
• /
• 2008

Titanium dioxide ($TiO_2$) shows antibacterial effects when exposed to near ultra violet (UV) light. In this study, $TiO_2$ photocatalytic continuous reactor was designed and applied to food-borne pathogens such as Vibrio parahaemolyticus ATCC 17802, Salmonella choleraesuis ATCC 14028, and Listeria monocytogenes ATCC 15313. $TiO_2$ films were prepared by conventional sol-gel dip-coating method using titanium tetra iso-propoxide (TTIP). The antibacterial activity of photocatalytic reactor with various flow rates and UV-A illumination time showed effective bactericidal activity. As the UV-A illumination time increased, survival rates of those bacteria decreased. After 60 min of UV-A illumination, the survival rates of V. parahaemolyticus and S. choleraesuis were less than 0.1%. However, that of L. monocytogenes was about 5% at that time point. These results present an effective way to exclude pathogenic bacteria from aqueous foods.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.324-330
• /
• 2021

As energy harvesting technology becomes important in relation to environmental issues, piezoelectric materials that convert mechanical energy into electrical energy are attracting attention. However, PZT, a representative material for piezoelectricity, is becoming difficult to use due to the problem that its components can cause environmental pollution. For this reason, recent research suggests a triboelectric nanogenerator (TENG) that generates energy through the combined effect of triboelectricity and electric induction for alternative piezoelectric devices. In TENG, electrical power is determined by the dielectric constant, thickness, and grain generation of the charged material. Therefore, in this study, a Rutile phase TiO₂ thin film with high dielectric constant was formed using the spin-coating process and the effect of annealing was investigated. For electrical analysis, a TENG device was fabricated using PTFE as a material with an opposite charge, and electrical output according to film thickness and grain formation was comparatively analyzed.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.119-122
• /
• 2018

본 논문은 용액공정으로 제작한 ZnO/Ag/ZnO 다층구조의 투과도에 대해 연구하였다. 다양한 두께의 ZnO/Ag/ZnO 다층구조를 스핀코팅을 이용해 제작하였고 광학적 특성을 측정하였다. ZnO는 졸겔법으로 제작하였고 Ag는 Ag 용액을 이용해 스핀코팅으로 증착하였다. 최적화된 Ag 두께를 찾기 위해 Ag 용액의 농도, 스핀코팅의 회전속도를 조절하고 두께와 면저항을 측정하였다. ZnO/Ag/ZnO 다층구조의 투과도는 가시광 영역에서 최대 63%까지 증가하였다. 적외선 영역에서 ZnO/Ag/ZnO 다층구조의 투과도는 Ag 용액의 농도가 2.5wt%일 때 투과도가 35%까지 감소하였다.

• 한국재료학회지
• /
• 제32권5호
• /
• pp.249-257
• /
• 2022

Transparent thin films of pure and nickel-doped ZrO₂ are grown successfully by sol-gel dip-coating technique. The structural and optical properties according to the different annealing temperatures (300 ℃, 400 ℃ and 500 ℃) are investigated. Analysis of crystallographic properties through X-ray diffraction pattern reveals an increase in crystallite size due to increase in crystallinity with temperature. All fabricated thin films are highly-oriented along (101) planes, which enhances the increase in nickel doping. Scanning electron microscopy and energy dispersive spectroscopy are employed to confirm the homogeneity in surface morphology as well as the doping configuration of films. The extinction coefficient is found to be on the order of 10^-2, showing the surface smoothness of deposited thin films. UV-visible spectroscopy reveals a decrease in the optical band gap with the increase in annealing temperature due to the increase in crystallite size. The variation in Urbach energy and defect density with doping and the change in annealing temperature are also studied.