• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.21-32
• /
• 1999

Mapping and precise point determination by photogrammetry have been shown to be an economic solution. But control points are necessary to determine the exterior orientation parameters. Although the number of required control points has been reduced based on extended bundle adjustment and reinforced cross-strip, the ground survey is a significant factor of whole expenses in photogrammetry. The status of GPS-photogrammetry with kinematic DGPS-positioning to overcome this disadvantages, is now steadly progressive since the first possibility has been proved. The completed satellite configuration, powerful receiver function and upgraded software for kinematic DGPS-positioning have extensively improved the accuracy of combined bundle adjustment. So the research for the operational use of GPS-photogrammetry is absolutely necessary. The presented test field was designed for identification of subsidences in a coal mining area, flown with 60％ sidelap and cross strips. Just with 6 control points and combined block adjustment instead of the traditionally used 21 horizontal and 81 vertical control points the same ground accuracy has been reached. The accuracy of kinematic GPS-positioning and combined block adjustment was independent upon the distance of the ground reference station. It also has been showed that the special model for the systematic error correction in the combined block adjustment.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.48-48
• /
• 2003

A precision orbit determination (POD) system of low Earth orbiter using the GPS dual frequency measurements has been developed. It is an option of KOMPSAT-2 POD process system. In this research, the orbit determination using the real dual frequency carrier phase measurements of the SAC-C satellite was conducted to verify KOMPSAT-2 POD system reliability. The SAC-C satellite is an international cooperative mission between NASA, the Argentine Commission on Space Activities (CONAE), Centre National d'Etudes Spatiales (CNES or the French Space Agency), Instituto Nacional De Pesquisas Espaciais (Brazilian Space Agency), Danish Space Research Institute, and Agenzia Spaziale Italiana (Italian Space Agency). The SAC-C was launched at November 21, 2000. The altitude of SAC-C is 702 km and it carries a TurboRogue III GPS and four high gain antennas developed by the JPL. The receiver is able to generate the dual frequency code and carrier phase data. Double-differenced carrier phase measurements were formed using 25 IGS stations. The data were sampled at 30 seconds interval. Fully dynamic approach was adopted for POD. The POD results were compared with those of JPL using GOA n software. The comparison verifies that deci-meter level 3D position accuracy of low Earth orbiting satellite could be achieved. The POD system has been developed successfully.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.675-686
• /
• 2005

This paper proposes a new method of mathematically modeling and computer simulating television ghosts wherein television signals that have undergone multipath fading are generated without using approximations by considering the attenuation, time delay, phase, and timing jitter between consecutive frames. Conventional methods used polynomial interpolation or complex arithmetic to take into account the ghost phase, but our method uses only real arithmetic by employing the Hilbert transform and also reduces the computation time using the FFT (fast Fourier transform) algorithm. Furthermore, it is also possible to observe the transmit waveforms in both RF and IF ranges. Various ghost patterns generated in software provide for essential data required for the development of ghost canceling algorithms, and are deemed to be very useful in analyzing the constituent blocks of the transmitter and receiver chain in television broadcasting. The development of ghost cancelers needs to be preceded by the task of mathematically modeling ghosts and their extensive computer simulations.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2011

In this paper, code and carrier tracking error which resulted from spoofing signal was analyzed by simulation. For a start, the types of spoofing signals and methods were classified. For the simulation, search spoofing method is assumed because a perfect position and velocity are not generally informed to spoofing device. In most cases, the tracking error is increased but a complete deception does not happen because of the inherent anti-spoofing characteristics of the GPS signal.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.157-164
• /
• 2013

In the presence of spoofing signal the GPS signal having the same PRN with the spoofer is hard to be acquired since the power of spoofing signal is usually stronger than that of GPS signal. If a spoofing signal exists for the same PRN, there are double peaks in two-dimensional space of frequency and code phase in acquisition stage. Using double peak information it is possible to detect spoofing signal and acquire GPS information through separate channel tracking. In this paper we introduce an anti-spoofing method using double peak detection, and thus can acquire GPS navigation data after two-channel tracking for the same PRN as the spoofing signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1251-1258
• /
• 2002

The weather FAX machine is the one of necessary of safety navigation for ship. which is the machine which make the weather image by the receiving radio signal which is modulated using FSK method and transmitted on air by coast station. after Coast station scan the weather image and broadcast the image with black dot to 1500Hz and white dot to 2300Hz using FSK modulation. This paper implement weather fax machine using only general IBM-PC by software. By using IBM-PC we can make some good functions like print, edit, save etc. The modulated signal from SSB go into RS232C port via photo coupler not to give damage to PC. by using Timer Interrupt and RS232C serial interrupt, we can measure signal frequency and remake weather image. This paper use only IBM-PC with general SSB receiver which is widely spread on the ship. so this is very economic and possible to implement mutifunctions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.401-408
• /
• 2005

Recently shield TBM tunnellings are being applied to subway construction in Korean cities. Generally these kinds of tunnellings have the problems in the stability of ground such as subsidence because urban subway is constructed in the shallow depth. A sinkhole occurred on the road just above the tunnel during tunneling in Kwangju, so a survey for upper layer of the tunnel was needed. But conventional Ground Probing Radar can't be applicable due to the presence of steel-mesh screen in the shield segment, so no existent geophysical method is applicable in this site. Because the outer surface of each shield segment is electrically insulated, dipole-dipole resistivity method which is popular in engineering site investigation, was tried to this survey for the first time. Specially manufactured flexible ring-type electrodes were installed into the grouting holes at an interval of 2.4 m on the ceiling. The K-Ohm II system which has been developed by KIGAM and tested successfully in many sites, was used in this site. The system consists of 1000Volt-1Ampere constant-current transmitter, optically isolated 24 bit sigma-delta A/D conversion receiver - maximum 12 channel simultaneous measurements, and graphical automatic acquisition software for easy data quality check in real time. Borehole camera logging with circular white LED lighting was also done to investigate the state of the layer. Measured resistivity data lack of some stations due to failing opening lids of holes, shows general high-low trend well. The dipole-dipole resistivity inversion results discriminate (1) one approximately 4 meter diameter cavity (grouted but incompletely hardened, so low resistivity - less than $30{\Omega}m$), (2) weak zone (100-200${\Omega}m$), and (3) hard zone (high resistivity - more than 1000${\Omega}m$) very well for the distance of 320 meters. The 2-D inversion neglects slight absolute 3-D effect, but we can get satisfactory and useful information. Acquired resistivity section and video tapes by borehole camera logging will be reserved and reused if some problem occurs in this site in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.49-57
• /
• 2008

The cemetery areas which are occupied more than 1.0 percent of whole land of Korea have widened gradually but the reconnaissance is not being conducted for the cemetery investigation due to deficiencies for budget and manpower of the government. The aim of this study is to find a method to establish the lower cost GIS-based cemetery management system by using hand-held DGPS receiver and Mobile GIS software system for easy cemetery management. The results were evaluated and compared to the RTK GPS method. Since the Cemetery Management System shows every tomb's position on the high resolution satellite imagery with a cadastral data, the map helps to find the interesting places easily. Therefore the system data can be used for various purposes such as planning for land development, dealing with real estate as well as cemetery management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.178-203
• /
• 2018

In this paper, authors have been evaluated the Frame Error Rate (FER) performance of IEEE 802.11 a/g/p standard 5 GHz frequency band WLAN over Rayleigh and Rician distributed fading channels in presence of Additive White Gaussian Noise (AWGN). Orthogonal Frequency Division Multiplexing (OFDM) based transceiver is implemented by using real-time signal processing frameworks (IEEE 802.11 Blocks) in GNU Radio Companion (GRC) and Ettus USRP N200 is used to process the symbol over the wireless radio channel. The FER is calculated for each sub-carrier conventional modulation schemes used by OFDM such as BPSK, QPSK, 16, 64-QAM with different punctuated coding rates. More precise SNR is computed by modifying the SNR calculation process of YANS and NIST error rate model to estimate more accurate FER. Here, real-time signal constellations, OFDM signal spectrums etc. are also observed to find the effect of multipath propagation of signals through flat and frequency selective fading channels. To reduce the error rate due to the multipath fading effect and Doppler shifting, channel estimation (CE) and equalization techniques such as Least Square (LS) and training based adaptive Least Mean Square (LMS) algorithm are applied in the receiver. The simulation work is practically verified at GRC by turning into a pair of Software Define Radio (SDR) as a simultaneous transceiver.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.27-38
• /
• 1995

For the study of oceanic surface current, this work presents a system design which is composed of three parts, a Global Positiong System(GPS) unit, a transmitter with radio frequency (RF) modem and an antenna which are housed in a plastic spherical buoy, and computerised of VHF receiving system. The key idea for this study is to employ a commercially available GPS on a drifting buoy and to utilize the receiver position information from the buoy in determining the Lagrangian motion of surface ocean waters. Great efforts has been paid to the system design which would demand several points in harsh conditions common in the sea surface, that is power supply problems housed inside of a plastic buoy, optimizing transmitting radio frequency which limits transmitting distance to a receiving station. for all these difficulties, the system appears to be promising in future oceanic applications and is considered to economical compared to ARGOS drift buoy which is being used by commercial base. We believe that the system needs to be improved in terms of several aspects such as a longer transmitting distance, a power supply and software. for the test experiments in situ, the system has employed off the coast of Ku Ryong Po int the southeast part of Korea and successfully collected the surface current data. The results are presented for two cases from 21 to 31, March 1994 and 21 to 25, June 1994 in terms of current statistics and trajectories of drifting buoys.