• Journal of the Korean Society of School Health
• /
• v.12 no.2
• /
• pp.207-215
• /
• 1999

The objectives of this study are to explain the use of media materials in school health education with other related factors in elementary, middle, and high schools in Korea. The data were collected by questionnaires from June to September in 1998. The number of subjects were 294 school nurses. The PC-SAS program was used for statistical analysis such as percent distribution, chi-squared test, spearman correlation test, and logistic regression. The use of media materials in health education has become extremely common. Unfortunately, much of the early materials were of poor production quality, reflected low levels of interest, and generally did little to enhance health education programming. A recent trend in media materials is a move away from the fact filled production to a more affective, process-oriented approach. There is an obvious need for health educators to use high-quality, polished productions in order to counteract the same levels of quality used by commercial agencies that often promote "unhealthy" lifestyles. Health educators need to be aware of the advantages and disadvantages of the various forms of media. Selecting media materials should be based on more than cost, availability, and personal preference. Selection should be based on the goal of achieving behavioral objectives formulated before the review process begins. The decision to use no media materials rather than something of dubious quality usually be the right decision. Poor-quality, outdated, or boring materials will usually have a detrimental effect on the presentation. Media materials should be viewed as vehicles to enhance learning, not products that will stand in isolation. Process of materials is an essential part of the educational process. The major results were as follows : 1. The elementary schools used the materials more frequently. But the production rate of media materials was not enough. The budget was too small for a wide use of media materials in school health education. These findings suggest that all schools have to increase the budget of health education programs. 2. Computers offer an incredibly diverse set of possibilities for use in health education, ranging from complicated statistical analysis to elementary-school-level health education games. But the use rate of this material was not high. The development of related software is essential. Health educators would be well advised to develop a basic operating knowledge of media equipment. 3. In this study, the most effective materials were films in elementary school and videotapes in middle and high school. Film tends to be a more emotive medium than videotape. The difficulties of media selection involved the small amount of extant educational materials. Media selection is a multifaceted process and should be based on a combination of sound principles. 4. The review of material use following student levels showed that the more the contents were various, the more the use rate was high. 5. Health education videotapes and overhead projectors proved the most plentiful and widest media tools. The information depicted was more likely to be current. As a means to display both text and graphic information, this instructional medium has proven to be both effective and enduring. 6. An analysis of how effective the quality of school nurse and school use of media materials shows a result that is not complete (p=0.1113). But, the budget of health education is a significant variable. The increase of the budget therefore is essential to effective use of media materials. From these results it is recommended that various media materials be developed and be wide used.

• Journal of Home Health Care Nursing
• /
• v.4
• /
• pp.5-22
• /
• 1997

The purpose of the study was to development an information delivery system for the home nursing service, to demonstrate and to evaluate the efficiency of it. The period of research conduct was from September 1996 to August 31, 1997. At the 1st stage to achieve the purpose, Firstly Assessment tool for the patients with cerebral vascular disease who have the first priority of HNS among the patients with various health problems at home was developed through literature review. Secondly, after identification of patient nursing problem by the home care nurse with the assessment tool, the patient's classification system developed by Park (1988) that was 128 nursing activities under 6 categories was used to identify the home care nurse's activities of the patient with CAV at home. The research team had several workshops with 5 clinical nurse experts to refine it. At last 110 nursing activities under 11 categories for the patients with CVA were derived. At the second stage, algorithms were developed to connect 110 nursing activities with the patient nursing problems identified by assessment tool. The computerizing process of the algorithms is as follows: These algorithms are realized with the computer program by use of the software engineering technique. The development is made by the prototyping method, which is the requirement analysis of the software specifications. The basic features of the usability, compatibility, adaptability and maintainability are taken into consideration. Particular emphasis is given to the efficient construction of the database. To enhance the database efficiency and to establish the structural cohesion, the data field is categorized with the weight of relevance to the particular disease. This approach permits the easy adaptability when numerous diseases are applied in the future. In paralleled with this, the expandability and maintainability is stressed through out the program development, which leads to the modular concept. However since the disease to be applied is increased in number as the project progress and since they are interrelated and coupled each other, the expand ability as well as maintainability should be considered with a big priority. Furthermore, since the system is to be synthesized with other medical systems in the future, these properties are very important. The prototype developed in this project is to be evaluated through the stage of system testing. There are various evaluation metrics such as cohesion, coupling and adaptability so on. But unfortunately, direct measurement of these metrics are very difficult, and accordingly, analytical and quantitative evaluations are almost impossible. Therefore, instead of the analytical evaluation, the experimental evaluation is to be applied through the test run by various users. This system testing will provide the viewpoint analysis of the user's level, and the detail and additional requirement specifications arising from user's real situation will be feedback into the system modeling. Also. the degree of freedom of the input and output will be improved, and the hardware limitation will be investigated. Upon the refining, the prototype system will be used as a design template. and will be used to develop the more extensive system. In detail. the relevant modules will be developed for the various diseases, and the module will be integrated by the macroscopic design process focusing on the inter modularity, generality of the database. and compatibility with other systems. The Home care Evaluation System is comprised of three main modules of : (1) General information on a patient, (2) General health status of a patient, and (3) Cerebrovascular disease patient. The general health status module has five sub modules of physical measurement, vitality, nursing, pharmaceutical description and emotional/cognition ability. The CVA patient module is divided into ten sub modules such as subjective sense, consciousness, memory and language pattern so on. The typical sub modules are described in appendix 3.

• Korean Journal of Clinical Pharmacy
• /
• v.23 no.2
• /
• pp.158-166
• /
• 2013

Background: Colorectal cancer shows a significant increase in South Korea due to westernization of diet, lack of dietary fiber, drinking and smoking, irregular defecation. There are surgery, chemotherapy, radiation therapy in treatment of colorectal cancer. There may be a medication errors in the process of chemotherapy because of its high toxicity, narrow therapeutic index and the health status of cancer patients. Consequently medication errors can cause increasing the risk of death, prolonging hospital stay and increasing the cost. Among medication errors on medication use process, prescribing errors are of particular concern due to higher risk of serious consequences. It is important for pharmacist to prevent the prescribing errors before reaching patient. Therefore we analyzed the prescriptions of colorectal cancer, classified prescribing errors, suggested guideline to reduce prescribing errors and verified the importance of pharmacist's role in prevention of medication errors activity. Methods: We collected the numbers of prescriptions of colorectal cancer(n=2,373) through anti cancer management program and EMR and analyzed the errors of prescriptions by categories from Oct 1st 2011 to Sep 30th 2012 at Chungbuk National University Hospital. We reviewed the prescriptions as follows - patients' characteristics, the result of test, previous prescriptions, characteristics of antineoplastic agents and patients' allergy, drug sensitivity, adverse events. Prescriptions are classified into inpatient and outpatient and analyzed the errors of prescriptions by categories (dosage form, dose, input, diluents, regimen, product). Results: Total prescription number of inpatient and outpatient of colorectal cancer was 1,193 and 1,180 and that of errors was 107(9%) and 22(1.9%), respectively. In case of errors of categories, the number of errors of dosage form is 69 and 8, errors of dose is 15 and 5, errors of input is 9 and 9 in inpatient and outpatient prescriptions, respectively. Errors of diluents is 8, errors of regimen is 3, errors of product is 3 in only inpatient prescriptions. In case of errors of categories by inpatient department, the number of errors of dosage form is 34 and 35, errors of dose is 7 and 8, errors of input is 6 and 3, errors of diluents is 4 and 4, errors of regimen is 2 and 1, errors of product is 2 and 1 in SG and HO, respectively. In case of outpatient department, the number of errors of dosage form is 8 in HO, errors of dose is 5 in HO, errors of input is 5 and 4 in SG and HO, respectively. Conclusions: The rate of errors of inpatient is higher than that of outpatient. Junior doctors are engaged in prescriptions of inpatient and pharmacist need to pay attention to review all prescriptions. If prescribing errors are discovered, pharmacist should contact the prescriber and correct the errors without delay. The guideline to reduce prescribing errors might be upgrading software of anti cancer management program, education for physicians as well as pharmacists and calling prescriber's attention to preventing recurrence of errors.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.377-382
• /
• 2020

A sequential design of experiments was employed to optimize MOF-235 synthesis for acetylene adsorption process. Two experimental designs were applied: a two-level factorial design for screening and a central composite design, one of response surface methodologies (RSM). In this study, 2³ factorial design of experiment was used to evaluate the effect of parameters of synthesis temperature and time, and also mixing speed on crystallinity of MOF-235. Experiments were conducted 16 times follwing MINITAB 19 design software for MOF-235 synthesis. Half-normal, pareto, residual, main and interaction effects were drawn based on the XRD results. The analysis of variance (ANOVA) of test results depicts that the synthesis temperature and time have significant effects on the crystallinity of MOF-235 (response variable). After screening, a central composite design was performed to optimize the acetylene adsorption capacity of MOF-235 based on synthesis conditions. From nine runs designed by MINITAB 19, the result was calculated using the second order model equation. It was estimated that the maximum adsorption capacity (18.7 mmol/g) was observed for MOF-235 synthesized at optimum conditions of 86.3 ℃ and 28.7 h.

• Phonetics and Speech Sciences
• /
• v.6 no.2
• /
• pp.73-79
• /
• 2014

Alveolar fricative sounds /s/ and /s'/ are learned last for normal children in the speech development process for Koreans. These are especially difficult to articulate for hearing-impaired children often causing articulation errors. The acoustic phonetic evaluation uses testing tools to provide indirect and object information. These objective resources can be compared with standardized resources on speech when interpreting the results of a test. However, most previous studies in Korea did not consider acoustic studies that used the spectrum moment values of hearing-impaired children. Therefore, this study was conducted to compare the characteristics of hearing-impaired children's pronunciation of fricative sounds using spectrum moment values. For this purpose, the study selected a total of 10 hearing-impaired children (5 boys and 5 girls) currently in 3rd or 5th grade and attending one of the elementary schools in Seoul or Gyeonggi-do. For the selection process, their age, type of hearing aid, implantation of hearing aid (CI) before two years of age, hearing capacity (dB) before and after wearing the hearing aid, duration of speech rehabilitation, and time of learning alveolar fricative sounds were all considered. Also, 10 normal children (5 boys and 5 girls) were selected among 3rd or 5th grade students attending one of the elementary schools in Seoul or Gyeonggi-do. The subjects were asked to read the carrier sentence, "I say _______," including a list of 12 meaningless syllables composed of CV and VCV syllables, including alveolar fricative sounds /s/ and /s'/ and vowels /a/, /i/, and /u/. The recorded resources were processed through the Time-frequency Analysis Software Program to measure M1 (mean), M2 (variance), M3 (skewness), and M4 (kurtosis) of the fricative noise. No significant differences were found when comparing spectrum threshold values in the acoustic phonetic characteristics of hearing-impaired children and normal children in alveolar fricative sound pronunciation according to vowels /a/, /i/, and /u/, alveolar fricative sounds /s/ and /s'/, and syllable structure (CV, VCV) other than, for M3 in the comparison of groups according to disability. In the comparison of syllable structures, there were statistically significant differences in M1, M2, M3, and M4 with clinical significance. However, there was no significant difference in results when comparing the alveolar fricative sounds according to the vowels.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2018

A change in object distance would generally change the magnification of an optical system. In this paper, we have proposed and designed a double-Gauss optical system with a fixed magnification and image surface regardless of any change in object distance, according to moving the lens groups a little bit to the front and rear of the stop, independently parallel to the direction of the optical axis. By maintaining a constant size of image formation in spite of various object-distance changes in a projection system such as a head-up display (HUD) or head-mounted display (HMD), we can prevent the field of view from changing while focusing in an HUD or HMD. Also, to check precisely the state of the wiring that connects semiconductor chips and IC circuit boards, we can keep the magnification of the optical system constant, even when the object distance changes due to vertical movement along the optical axis of a testing device. Additionally, if we use this double-Gauss optical system as a vision system in the testing process of lots of electronic boards in a manufacturing system, since we can systematically eliminate additional image processing for visual enhancement of image quality, we can dramatically reduce the testing time for a fast test process. Also, the Gaussian bracket method was used to find the moving distance of each group, to achieve the desired specifications and fix magnification and image surface simultaneously. After the initial design, the optimization of the optical system was performed using the Synopsys optical design software.

• Journal of Distribution Science
• /
• v.16 no.12
• /
• pp.69-80
• /
• 2018

Purpose - Our primary goal of this study is to investigate the positive relationship between female managers' self-determined motivations (i.e., RAI: relative autonomy index) and job performances with the mediation of their job creativity in service industries. This study also examines the moderating role of creative efficacy on the relationship between female managers' self-determined motivations and creativities. Finally, based on mediation and moderation hypotheses, we also tested moderating effect of creative efficacy on the mediation effect of job creativity. Research design, data, and methodology - Drawing on SDT(Self-determination theory) and COR(conservation of resources) theories, we developed three research hypotheses. Service female managers from a several service organizations(i.e. banking, retailing, and restaurant/hospitality service) in South Korea were surveyed using self-administered instrument for data collection. A total of 331 usable questionnaires were obtained after list-wise deletion. To test reliability and validity of measurement model, we employed the CFA(confirmatory factor analysis) using M-plus 8.1 Software. Also, internal consistency was tested by Cronbach's α. We, furthermore, used the SPSS PROCESS MACRO 2.16, which was suggested by Hayes (2013; 2015), to test mediation, moderation, and moderated mediation. Results - Our results revealed that self-determined motivation and job performance were positively and fully mediated by job creativity. Furthermore, the positive relationship between female managers' self-determined motivations and job creativities was stronger when their creative self-efficacies were high than when it was low. In addition, female managers' creative self-efficacies also amplified the positive relationship between their self-determined motivations and job performances with the mediation of job creativity. Conclusions - Our research empirically elaborated the previous model of self-determined motivation and manager/female creativity literature by presenting the findings that female managers' self-determined motivations significantly influence their job performances via job creativity and that creative self-efficacy effectively strengthen these positive impacts. Also, our research offered new insight for practitioners (i.e. top service managers) by suggesting that they may enhance female service managers' job performance if they pay more attention to employee creativity in service marketing.

• Physical Therapy Korea
• /
• v.25 no.2
• /
• pp.22-29
• /
• 2018

Background: Deficits of both ankle dorsiflexion range of motion (DFROM) and dynamic balance are shown in persons with chronic ankle instability and the elderly, with the risk of falls. Objects: This study aims to investigate the relationship between DFROM and dynamic balance in elderly subjects and young adults. Methods: Fifty-nine subjects were divided into three groups: ankle stability young group (SY), ankle instability young group (IY) and ankle stability older group (SO). We recruited three old subjects with ankle instability, but excluded them during a pilot testing due to the safety issue. DFROM was measured by weight bearing lunge test (WBLT) and dynamic balance was measured via star excursion balance test (SEBT) in anteromedial, medial, and posteromedial directions. The group differences in WBLT and SEBT and each group's correlation between WBLT and SEBT were detected using the R statistical software package. Results: The dorsiflexion range of motion was significantly different between the SY, IY, and SO groups. The SO group showed the highest DFROM and IY group showed the lowest DFROM (SY: $45.88{\pm}.66^{\circ}$, IY: $39.53{\pm}1.63^{\circ}$, SO: $47.94{\pm}.50^{\circ}$; p<.001). However, the SO group showed the lowest dynamic balance score for all SEBT directions (SY: $87.24{\pm}2.05cm$, IY: $83.20{\pm}1.30cm$, SO: $77.23{\pm}2.07cm$; p<.05) and there was no relationship between the dorsiflexion range of motion and dynamic balance in any group. Conclusion: Our findings suggest that ankle DFROM is not a crucial factor for dynamic stability regardless of aging and ankle instability. Other factors such as muscle strength or movement coordination should be considered for training dynamic balance. Therefore, we need to establish the rehabilitation process by measuring and treating ROM, balance, and muscle strength when treating young adults with and without ankle instability as well as elderly people.

• Journal of KIISE:Software and Applications
• /
• v.37 no.1
• /
• pp.29-38
• /
• 2010

We propose an interactive projection technique to display details of a large image in a high resolution and brightness by tracking a portable projector. A closed-loop based tracking method is presented to update the projected image while a user changes the position of the detail area by moving the portable projector. A marker is embedded in the large image to indicate the position to be occupied by the detail image projected by the portable projector. The marker is extracted in sequential images acquired by a camera attached to the portable projector. The marker position in the large display image is updated under a constraint that the center positions of marker and camera frame coincide in every camera frame. The image and projective transformation for warping are calculated using the marker position and shape in the camera frame. The marker's four corner points are determined by a four-step segmentation process which consists of camera image preprocessing based on HSI, edge extraction by Hough transformation, quadrangle test, and cross-ratio test. The interactive projection system implemented by the proposed method performs at about 24fps. In the user study, the overall feedback about the system usability was very high.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.159-167
• /
• 2014

PURPOSES : The purpose of this study is to analyze the requirements of the road traffic safety moderator robot when road repairing. The road traffic safety moderator robot is road traffic safety equipment and to conversions mechanical engineering and IT when road repairing. METHODS : The study used AHP based on the survey from road repair related expert that field engineers, design engineers, public officials and professors. The survey used paired comparison. The survey items were safety, convenience and economics. The safety is classified as visibility or efficiency, the convenience is classified as utility or mobility and the economics is classified as initial investment cost or maintenance $ management cost. The survey alternatives were the road traffic safety moderator robot, traffic regulation by human, traffic regulation by mannequin and traffic signs. The software for AHP is Expert Choice 2000. RESULTS : The results of AHP analyze, the weighted value of safety was analyzed with the highest at 0.488 of survey items. The weighted value of convenience was analyzed at 0.295, the weighted value of economics was analyzed at 0.218. The results of the road traffic safety moderator robot, the weight value of efficiency and utility were analyzed with the highest at 0.284 and 0.259 of alternatives. The weighted value of initial investment cost and maintenance & management cost were analyzed with the lowest at 0.203 and 0.211 of alternatives. The consistency test results of each items, null hypothesis is rejected because the CR values were 0.000 respectively. Therefore, the study results are consistency. CONCLUSIONS : The result of this study, overall value of the road traffic safety moderator robot came off second-best of other alternatives. The road traffic safety moderator robot has been received highest praise by the result of the study as good road traffic safety equipment when road repairing because the weighted values of efficiency and utility were analyzed with the highest of survey items. The efficiency mean securing safety and the utility mean practical assistance when road repairing. The results of this study showed that the road traffic safety moderator robot will effective for traffic safety when road repairing. economics and visibility are that supplementation of the road traffic safety moderator robot because the weighted values of economics and visibility were analyzed with the lowest of survey items. The consistency test results are consistency because the CR values were 0.000 respectively.