• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.179-191
• /
• 2021

In this study, the strength and failure mechanism of red sandstones with combined defects were investigated by uniaxial compression tests on red sandstones with different crack angles using two-dimensional particle flow code numerical software, and their mechanical parameters and failure process were studied and analyzed. The results showed that the mechanical characteristics such as peak strength, peak strain, and elastic modulus of the samples with prefabricated combined defects were significantly inferior than those of the intact samples. With increasing crack angle from 15° to 60°, the weakening area of cracks increased, elastic modulus, peak strength, and peak strain gradually reduced, the total number of cracks increased, and more strain energy was released. In addition, the samples underwent initial brittle failure to plastic failure stage, and the failure form was more significant, leading to peeling phenomenon. However, with increasing crack angle from 75° to 90°, the crack-hole combination shared the stress concentration at the tip of the crack-crack combination, resulted in a gradual increase in elastic modulus, peak strain and peak strength, but a decrease in the number of total cracks, the release of strain energy reduced, the plastic failure state weakened, and the spalling phenomenon slowed down. On this basis, the samples with 30° and 45° crack-crack combination were selected for further experimental investigation. Through comparative analysis between the experimental and simulation results, the failure strength and final failure mode with cracks propagation of samples were found to be relatively similar.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2021

In this paper, we propose a method to find the DoF(Depth of field) that is blurred in an image by focusing and out-focusing the camera through a efficient convolutional neural network. Our approach uses the RGB channel-based cross-correlation filter to efficiently classify the DoF region from the image and build data for learning in the convolutional neural network. A data pair of the training data is established between the image and the DoF weighted map. Data used for learning uses DoF weight maps extracted by cross-correlation filters, and uses the result of applying the smoothing process to increase the convergence rate in the network learning stage. The DoF weighted image obtained as the test result stably finds the DoF region in the input image. As a result, the proposed method can be used in various places such as NPR(Non-photorealistic rendering) rendering and object detection by using the DoF area as the user's ROI(Region of interest).

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.321-325
• /
• 2020

Purpose: This study is to evaluate the accuracy of gypsum replica models made from various gypsum products. Methods: One main model was made of stainless steel by CNC milling process. Molds were formed from the main model, and the gypsum replica models were made using 8 types of type IV gypsum, 10 pieces each. The main model was digitized by a contact scanner (Incise; Renishaw) and the gypsum replicas were digitized by an optical scanner (E4; 3Shape A/S). The difference between the main model and the gypsum replicas were measured by inspection software (3D Systems). One-way ANOVA was performed to evaluate the statistical significance of differences between groups. In addition, the independent sample T test was performed to determine the difference between the conventional and scannable stone group (n=10, α=0.05). Results: The root mean square of the stone models were 7.24 ㎛ to 10.78 ㎛, and statistical significance was found between the two groups (SR, FR) and the other 6 groups (IS, SG, CA, CS, ER, EBG) (p<0.05). The accuracy of the gypsum replicas was 9.04 ㎛ and 7.62 ㎛ in the conventional and scannable stone group, respectively. There was statistical significance between the two groups (p<0.01). Conclusion: In the limited results of this study, the product with low setting expansion and the scannable showed high accuracy. Therefore, in order to obtain a stable and accurate scan model, it is more effective in terms of accuracy to use a scannable stone with a low setting expansion.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.2
• /
• pp.19-31
• /
• 2021

The Ministry of Maritime Affairs and Fisheries has been promoting the 'Fishing Village Specialization Capacity Enhancement Project' to pursue sustainable development of villages such as income generation by using local tangible and intangible resources led by local residents at the village level since 2013. For the fishing village-Specialization capacity enhancement project, six training sessions (mainly in the village unit) are selected by the public offering method, and the project (income generating business, village development project, etc.) is developed for the selected village residents. It has a process of establishing a village project plan (a preliminary plan for village development or a sixth preliminary industrialization plan) based on the training of experts 5 times, practice or excursion 1 time). In this study, four villages in Gangwon-do fishing villages (two coastal villages and two inland water villages) were surveyed on the perception and satisfaction of fishing village development projects before and after training. The survey analysis was conducted by dividing the analysis of resident capacity and satisfaction into personal, interpersonal, and social dimensions. The survey was conducted by distributing a survey before and after training, and a 1:1 survey was conducted according to the residents' cognitive status. Based on the survey, factor analysis, reliability analysis, and analysis using the corresponding sample t-test showed an increase of 0.02 for Yangyang Mulchi fishing village, 0.11 for Samcheok Jangho fishing village, and 0.36 for Hongcheon River fishing industry, but Yanggu Jinmok fishing industry was -0.29, unlike other regions. As a result of this analysis, it has been empirically proven that provision of training projects through resident participation is a very important factor for the success of the fishing village project. Therefore, rather than fostering local leaders, training and community activities to strengthen personal capacities of residents participating in the project, it is necessary to operate the software business with a focus.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.159-168
• /
• 2022

The purpose of this study is to look at the precise direction and magnitude of cultural elements such as education, gender, power distance, and risk-taking proclivity on ethical decision-making. Data was collected from 194 interviewees in three groups: general business students, accounting major students, and professional auditors in Vietnam. The path analysis is used to test the impact of cultural factors on ethical awareness, ethical judgment, and ethical intention in different dubious scenarios at the personal level as independent variables, intermediate variables, and moderating variables. The metric is the percentage of respondents who believe a particular behavior is unethical based on a set of ethical principles. The researchers used SPSS AMOS software to conduct a confirmatory factor survey to evaluate the convergent and discriminant validity of latent variables. The results show differences between the two groups of students and professionals on these measures, suggesting that all of the four factors have an effect on ethical decision-making. Based on research results, some recommendations are proposed related to the four factors to improve the ethics of future generations of auditors in Vietnam. This study also contributes to the theory of culture in particular and cultural interference in general in the field of accounting-auditing in Vietnam in the process of international integration.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.462-470
• /
• 2022

Background Reactive oxygen species cause serious damage to the physiological function of tissues. Determination of total antioxidant capacity of skin tissue is one of the determinants of damaged tissue function. Mast cells (MCs) are one of the groups of cells that are invited to the site of injury. The healing process begins with the rapid release of various types of MCs' intermediate factors at the site of injury. Bone marrow mesenchymal stem cell (BMMSC) production and secretion have been shown to regenerate the skin. The aim of this research was to evaluate the wound-healing and antioxidant effects of BMMSCs per MCs. Methods Fifty-four albino Wistar male rats were divided into three groups: (1) nonsurgery, (2) surgery, and (3) surgery + BMMSCs. Groups 2 and 3 were operated with a 3 × 8 cm flap and in group 3, cell injections (7 × 10⁹ cell injection at the time of surgery) were performed. After days 4, 7, and 15, percentage of the surviving tissue, histological characteristics, superoxide dismutase (SOD) activity, and amount of malondialdehyde (MDA) were measured in the groups. For results, Graph Pad Prism 8 software was used, and data were analyzed and compared by analysis of variance and Tukey test. Results BMMSCs' application decreased the amount of MDA, increased SOD activity and survival rate of the flaps, and improved the histological characteristics. Conclusion This study revealed the protective effects BMMSCs alongside MCs against oxidative stress on the survival of the flaps. However, for clinical use, more research is needed to determine its benefits.

• Journal of dental hygiene science
• /
• v.22 no.4
• /
• pp.241-248
• /
• 2022

Background: Plastic waste generates pollutants in the process of incineration or landfilling, and accumulates in water or marine organisms, causing adverse effects on the environment and the human body. Recently, various eco-friendly oral hygiene products (Eco-OHPs) such as bamboo toothbrushes and biodegradable plastic toothbrushes have been developed. Therefore, this study aimed to investigate the current level of awareness and purchasing status of eco-OHPs among adults who are interested in eco-friendly products. Methods: This study included adults aged >19 years who regularly visited eco-friendly shops and online sites; the online survey links were distributed during their visits to eco-friendly Internet cafés and companies. Of the 22 questions, seven assessed the participants' general characteristics, three assessed the general oral hygiene care products used, six assessed the level of awareness of Eco-OHPs, and six assessed the purchasing status of Eco-OHPs. Frequency analysis, chi-square test, and regression analysis were performed using SPSS software. Results: Among the respondents, 108 (51.4%) were aware of Eco-OHPs, and 79 (37.6%) had experience purchasing Eco-OHPs. The most common reason for not purchasing was the lack of information about related brands or products (74, 56.5%). The most common platform used in obtaining information was the Internet (general: 31.5%, eco-friendly: 46.3%), such as Social Network Service, Internet cafes, and blogs. The experience in purchasing Eco-OHPs was affected by whether the respondents recognized the possibility of contributing to environmental preservation, availability of vendors, product safety, and the number of eco-friendly products purchased. Conclusion: In order to expand the use of Eco-OHPs, various efforts such as promotion of eco-friendly characteristics, determination of related vendors, reliable analysis of product safety, and expansion of product experience opportunities are required.

• Composites Research
• /
• v.22 no.4
• /
• pp.20-26
• /
• 2009

In the current study, thermoforming and compression analysis were carried out for the woven composite egg-box panel with the non-orthogonal constitutive material model, which is proposed by Xue et al. The material model is implemented in commercial engineering software, LS-DYNA, with a user subroutine. Directional properties in non-orthogonal coordinates are determinedusing the deformation gradient tensor and the material modulus matrix in local coordinate is updated at eaeh corresponding time step. After the implemented non-orthogonal constitutive model is verified by the bias extension test, the egg-box panel simulations are performed. The egg-box panel simulations are divided into two categories: thermoforming (draping) and crushing. The finite element model for crushing analysiscan be obtained using the displacement result of thermoforming process.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.619-624
• /
• 2023

As the importance of digital competency education is highlighted, this study is a case study on block coding classes for elementary school students during vacation for the purpose of bridging the information education gap among students. The purpose of this study is to design and operate a play-centered block coding class program and find out if it is effective in improving students' interest. As a result of completing the teaching plan through the second consultation and revision, running the class, and analyzing the change in learning interest of the students through the t-test, the play-oriented block coding class designed in this study was effective in improving students' interest. In addition, it was possible to discover interesting elements such as student-led learning process and immersion through realistic play activities, friendship, collaboration, and communication through group activities. This study is significant in suggesting a plan to increase learning interest for students who are new to coding.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.