• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.151-155
• /
• 2015

The interfacial electronic structure between zinc phthalocyanine (ZnPc) and aluminumdoped zinc oxide (AZO) substrates has been evaluated by ultraviolet photoemission spectroscopy and angle-dependent x-ray absorption spectroscopy to understanding the molecular orientation of a ZnPc layer on the performance of small molecule organic photovoltaics (OPVs). We find that the ZnPc tilt angle improves the ${\pi}-{\pi}$ interaction on the AZO substrate, thus leading to an improved short-circuit current in OPVs based on phthalocyanine. Furthermore, the molecular orientation-dependent energy level alignment has been analyzed in detail using ultraviolet photoemission spectroscopy. We also obtained complete energy level diagrams of ZnPc/AZO and ZnPc/indium thin oxide.

• 한국의학물리학회지:의학물리
• /
• 제4권1호
• /
• pp.55-71
• /
• 1993

Measured and calculated the TMR and SMR factors from percent depth dose underpartial attenuators which cover the whole part of the radiation beam with variousfilter thickness from 0 to 50 mm. This study was performed for x-ray beams generated with a 6 MV linear acceleratorat source to surface distance of 100cm in a water phantom for Lipowitz metal. TMR(0,d,t) was derived from non-linear polynomial regression with field sizedifferencies and a given filter thickness. In this experiments, the TMR(0,10,50) of 50mm of filter thickness was showed13.6 % higher than that of open field and SMR(5,10,50) was 38.5% smaller than thatof open field in same depth.

• 천문학회지
• /
• 제33권2호
• /
• pp.123-126
• /
• 2000

We have developed a near real-time flare alerting system which (1) downloads the latest GOES-l0 1-8 ${\AA}$ X-ray flux 1-min data by an automated ftp program and shell scripts, (2) produces a beep sound in a simple IDL widget program when the flux is larger than a critical value, and (3) makes it possible to do a wireless alerting by a set of portable transceivers. Thanks to the system, we have made successful Ha flare observations by the Solar Flare Telescope in Bohyunsan Optical Astronomy Observatory. This system is expected to be helpful for ground-based flare observers.

• 한국자기학회지
• /
• 제26권6호
• /
• pp.185-189
• /
• 2016

이 연구에서는 방사광을 이용한 연 X-선 흡수 분광법(soft X-ray absorption spectroscopy: XAS)과 광전자 분광법(photoemission spectroscopy: PES) 을 이용하여 반쪽금속 반강자성체 후보 물질인 $Mn_3Ga$ 호이슬러 화합물의 전자구조를 연구하였다. 이 연구에 사용된 시료는 full-Heusler $Mn_3Ga$로 ball milling 후 열처리하지 않은 시료와 ball milling 후 $400^{\circ}C$에서 열처리한 두 시료를 사용하였다. XAS 분석에 의하면 $Mn_3Ga$에서 Mn 이온들의 원자가는 $Mn^{2+}$ 상태임을 알 수 있었으며, 국소적으로 팔면체 대칭성을 가진 Mn 이온들과 사면체 대칭성을 가진 Mn 이온들이 섞여 있음을 알 수 있었다. 그리고 $Mn_3Ga$의 가전자띠 PES 스펙트럼은 전자구조 계산에 의한 반쪽 금속성 상태밀도와 대체로 유사함을 발견하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권1호
• /
• pp.23-31
• /
• 2006

X선은 강한 투과성과 직진성으로 인하여 비파괴 검사법으로써 다양한 분야에서 활용되고 있다. 본 연구에서는 고건축물과 같은 목조 건축물에 사용되고 있는 구조부재의 열화를 현장에서 탐지할 수 있는 비파괴 검사법을 개발할 목적으로 X선 CT시스템의 적용가능성을 검토하였다. 먼저 이전 연구의 결과를 바탕으로 CT영상을 구성하는 체계를 확립하고, 얻어진 CT영상을 실제 부재의 단면 형태와 비교함으로써 개발된 시스템의 적용가능성을 확인하였다. 개발된 X선 CT시스템의 적용을 통해 결함의 형태와 크기, 위치뿐만 아니라 결함에서의 밀도 또한 비교적 정확하게 탐지할 수 있음이 확인되었다. 이러한 결과는 건축물에서 사용되고 있는 목재 부재에 열화가 발생하였을 경우에, 열화 발생의 원인을 파악하고 그에 따른 효과적인 대처방안을 수립하는데 있어서 유용하게 활용될 수 있을 것으로 기대된다. 그러나 현재의 시스템은 개발 초기단계로 측정에 따른 소요시간이나 측정회수, 측정 정밀도에 있어서 여러 제약을 받는다. 따라서 이러한 제약을 극복하기 위한 추가적인 연구가 요구된다.

• 폴리머
• /
• 제25권1호
• /
• pp.33-40
• /
• 2001

불소화된 폴리우레탄 탄성체를 4,4'-diphenyl methane diisocyanate(MDI) 혹은 toluene 2,4-diisocyanate(TDI) 같은 diisocyanate와 perfluorinated polyether(Fomblin $ZDOL^{\circledR}$)로부터 2단계 용액 중합법에 의해 합성하였다. 합성된 폴리우레탄의 soft segment 부분 중 10~50%를 Fomblin ZDOL 성분이 되도록 polypropylene glycol(PPG) 혹은 polytetramethylene glycol(PTMG)과 같은 polyether polyol을 반응도중에 혼합하여 반응을 완성하였다. 사슬연장제로는 ethylene diamine 혹은 1,4-butanediol을 사용하였다. 합성 중합체의 확인과 평균분자량 등 특성조사에 FT-IR, $1^H$-NMR, 겔투과 크로마토그래피(GPC), 시차주사열량계(DSC)를 이용하였고 표면특성은 X-ray photoelectron spectroscopy(XPS)와 접촉각으로 조사하였다. 표면분석결과 불소기는 합성된 탄성체 필름의 내면보다 표면에 더 많이 분포함을 알 수 있었다

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.427-437
• /
• 2019

Waste materials are being produced in huge quantities globally, and the usual practice is to dump them into legal or illegal landfills. Recycled tiles (RT) are being used in soil stabilisation which is considered as sustainable solution to reduce the amount of waste and solve the geotechnical problems. Although the stabilisation of soil using RT improved the soil properties, it could not achieve the standard values required for construction. Thus, this study uses 20% RT together with low cement content (2%) to stabilise soft soil. Series of consolidated undrained triaxial compression tests were conducted on untreated and RT-cement treated samples. Each test was performed at 7, 14, and 28 days curing period and 50, 100, and 200 kPa confining pressures. The results revealed an improvement in the undrained shear strength parameters (cohesion and internal frication angle) of treated specimens compared to the untreated ones. The cohesion and friction angle of the treated samples were increased with the increase in curing time and confining pressure. The peak deviator stress of treated samples increases with the increment of either the effective confining pressures or the curing period. Microstructural and chemical tests were performed on both untreated and RT-cement treated samples, which included field emission scanning electron microscopic (FESEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and energy dispersive X-ray spectrometer (EDX). The results indicated the formation of cementation compounds such as calcium aluminium hydrate (C-A-H) within the treated samples. Consequently, the newly formed compounds were responsible for the improvement observed in the results of the triaxial tests. This research promotes the utilisation of RT to reduce the amount of cement used in soil stabilisation for cleaner planet and sustainable environment.

• 한국포장학회지
• /
• 제22권1호
• /
• pp.15-23
• /
• 2016

Gelatin soft capsules, manufactured by the press through package(PTP) process, are widely used in the production of multivitamin dietary supplements and other health functional foods. Gelatin capsules can prevent light and air from having a direct contact with the contents in the capsule, and the nutrients inside the capsules are preserved without any loss. In the present study, on the basis of the results on the safety of gelatin capsules. The parameters investigated included degradation of the capsules before their shelf life, capsule deformation, and changes in specific nutrients. Moisture and heat in the production and storage environments of the capsules caused the gelatin to swell and attach some of the inorganic salts in the vitamin contents. Nutritional component analysis showed that B1, B5, B9, and B12 contents were decreased, while mineral elemental analysis shown calcium, chloride, and zinc compound were found to be infused into the gelatin of the capsule shell.

• Journal of Magnetics
• /
• 제9권2호
• /
• pp.65-68
• /
• 2004

Magnetically soft nanomaterials obtained by controlled crystallisation of metallic glasses are the newest group of materials for inductive components. In particular, research is carried out in the field of alloys for high temperature applications. This kind of materials must meet two basic requirements: good magnetic properties and stability of properties and structure. In the present work the magnetic properties and structure of Fe-Co-Hf-Zr-Cu-B (HIDTPERM-type) alloys were investigated, as well as their stability. Differential thermal analysis, (DTA), X-ray diffractometry (XRD), transmission electron microscopy (TEM), magnetometry (VSM) and quasistatic hysteresis loop recording were used to characterise structure and properties of the alloys investigated. Optimisation against properties and their stability was performed, resulting in formulation of chemical composition of the optimum alloy, as well as its heat treatment.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.275-276
• /
• 1998

In this paper, we present the software on the development of the computerized imaging system for diagnosis and treatment plannig of orthodontics and orthognathic surgery. Soft tissue changes followed by orthognathic surgery mainly depends on surgical movements of hard tissue. Then, the stepwise multiple regression method was used to investigate the soft tissue changes followed by hard tissue changes. As a result of this research, we were able to develop a system which diagnoses automatic X-ray images and predicts soft tissue changes after othognathic surgery.