• The Plant Pathology Journal
• /
• v.16 no.6
• /
• pp.321-324
• /
• 2000

season of 2000. The disease infection usually started from flower, peduncle and young fruits, then moved to flower stalk, stem and leaves. At first, the lesions started with water-soaked, rapidly softened, and then the area gradually expanded. In severely affected film house, the rate of infected fruits reached to 28.6%. Numerous sporangiospores were formed on the diseased fruits, flower stalk, stem and leaves. Most of the sporangiospores were appeare to be rapidly dispersed in the air. The mycelia grew on the surface of host and formed stolons. Colonies on potato dextrose agar were cottony at first brownish black at maturity. Sporangia were 125.3${\times}$294.2 ${\mu}$m. globose or sub-globose with somewhat flattened base. White at first the black, many spored, and are never overhanging. Sporangiophores were 2.7-6.8${\times}$12.9-33.9 ${\mu}$m, smooth-walled, non-septate, light brown, simple, long, arising in groups of 3-5 from stolons opposite rhizoids. Sporangiophores were 8.6-21.1${\times}$6.41-1.7 ${\mu}$m, irregular, round, oval, elongate, angular and brownish-black streaked. Columella were 63.8${\times}$140.4 ${\mu}$m. brownish gray, umberella-shaped when dehisced. The causal organism was identified as Rhizopus stolonifer Lind on the basis of the morphological characteristics of the fungus. Rhizopus soft rot on squash (Cucurbita moschata) caused by the fungi has not been previously reported in Korea.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.168-172
• /
• 2012

This article presents an evaluation of the effects of coating conditions on the enteric coating quality of soft gelatin capsules containing Omega-3 fatty acids. Three conditions were controlled: concentration of hydroxypropyl methylcellulose phthalate (6, 8, and 10 wt% in solution), temperature of the inlet air (32, 35, and $38^{\circ}C$), and the coating solution feed rate (7.5, 11.25, and 15.0 g/min). The transparency of the enteric coated soft gelatin capsules was evaluated by measuring the degree of whiteness of the surface using a spectrophotometer. Results showed that the most important parameter in the enteric coating process was the coating solution feed rate. As the coating solution feed rate decreased and inlet air temperature increased, the degree of whiteness of coating surfaces decreased. We also evaluated the disintegration properties of the enteric coated capsules in accordance with the Korea Health Functional Food Code.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.1
• /
• pp.18-24
• /
• 2018

Objectives: Foreign bodies (FBs) account for 3.8% of all pathologies of the head and neck region, and approximately one third of them are missed on initial examination. Thus, FBs represent diagnostic challenges to maxillofacial surgeons, rendering it necessary to employ an appropriate imaging modality in suspected cases. Materials and Methods: In this cross-sectional study, five different materials, including wood, metal, glass, tooth and stone, were prepared in three sizes (0.5, 1, and 2 mm) and placed in three locations (soft tissue, air-filled space and bone surface) within a sheep's head (one day after death) and scanned by panoramic radiography, cone-beam computed tomography (CBCT), and ultrasonography (US) devices. The images were reviewed, and accuracy of the detection modalities was recorded. The data were analyzed statistically using the Kruskal-Wallis, Mann-Whitney U-test, Friedman, Wilcoxon signed-rank and kappa tests (P<0.05). Results: CBCT was more accurate in detection of FBs than panoramic radiography and US (P<0.001). Metal was the most visible FB in all of modalities. US was the most accurate technique for detecting wooden materials, and CBCT was the best modality for detecting all other materials, regardless of size or location (P<0.05). The detection accuracy of US was greater in soft tissue, while both CBCT and panoramic radiography had minimal accuracy in detection of FBs in soft tissue. Conclusion: CBCT was the most accurate detection modality for all the sizes, locations and compositions of FBs, except for the wooden materials. Therefore, we recommend CBCT as the gold standard of imaging for detecting FBs in the maxillofacial region.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.142-146
• /
• 2009

The soft magnetic property for the Corning glass/Ta(5 nm)/[Conetic, Permalloy)/Ta(3 nm) prepared by the ion beam deposition sputtering was investigated. The coercivity and saturation magnetic field of conetic (NiFeCuMo) and permalloy (NiFe) layer with easy and hard direction along to the applying magnetic field during deposition was compared with each other. The surface resistance of conetic film with a thickness of 10 nm was 2 times lower than one of permalloy film. The coercivity and the magnetic susceptibility of conetic film decreased and increased 3 times to one of permalloy film, respectively. These results suggest that a highly sensitive GMR-SV or MTJ using conetic film can be possible to develop the bio-device.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.74-77
• /
• 2005

The injection of cement stabilizer is used as one of ways to stabilize soft sea-bottom. However, this method makes an argument for the possibility of releasing heavy metals from the cement stabilizer to the seawater. To investigate the effect of the cement stabilizer on the seawater, field measurements were carried out in Ocheon harbor of the Chunsoo Bay. Although the highest concentrations of dissolved heavy metals were found in the surface seawater of the injection point and the metal concentrations decreased with distances, the levels of heavy metals in all the seawater met the demand of environmental criteria of Korea, US and UK.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.356-356
• /
• 2010

Tribological behaviors of the hard film on soft substrate system were explored using the hard thin film of diamond-like carbon (DLC) coated the soft polymer of polydimethysiloxane (PDMS). A DLC film with the Young's modulus of 100 GPa was coated on PDMS substrate with Young's modulus of 10 MPa using plasma enhanced chemical vapor deposition (PECVD) technique. The deposition time was varied from 10 sec to 10 min, resulting in nanoscale roughness of wrinkle patterns with the thickness of 20 nm to 510 nm, respectively, at a bias voltage of $400\;V_b$, working pressure 10 mTorr. Nanoscale wrinkle patterns with 20-100 nm in width and 10-30 nm height were formed on DLC coating due to the residual stress in compression and difference in Young's modulus. Nanoscale roughness effect on tribological behaviors was observed by performing a tribo-experiment using the ball-on-disk type tribometer with a steel ball of 6 mm in diameter at the sliding speed of 220 rpm, normal load of 1N and 25% humidity at ambient temperature of $25^{\circ}C$. Friction force were measured with respect to thickness change of coated DLC thin film on PDMS. It was found that with increases the thickness of DLC coating on PDMS, the coefficient of friction decreased by comparison to that of the uncoated PDMS. The wear tracks before and after tribo-test were analyzed using SEM and AFM.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.1
• /
• pp.89-95
• /
• 2008

Until recently lots of time-history seismic analyses were performed with the earthquake motions recorded at the soft soil surface without taking into account the effects of the soft soil amplification. However, it is important to utilize the bedrock seismic motions for the rational seismic analyses of a structure considering the site soil conditions. In this study, 26 bedrock earthquake records were selected from publicly available 1557 seismic records provided by the Pacific Earthquake Engineering Research Center (PEER) for the study, and the characteristics of them were investigated. Study results showed that it is not reasonable to estimate earthquake acceleration intensity from the magnitude of an earthquake without considering the site soil conditions and it is also hard to draw any general relationships between earthquake acceleration intensity, earthquake magnitude and epicenter distance with bedrock earthquake records in the PEER database. However, 26 bedrock earthquake records selected in this study can be utilized for the time-history seismic analyses of a structure-soil system as bedrock earthquake ones, and it is also confirmed that it is necessary to take into account acceleration intensity, magnitude, epicenter distance and site conditions simultaneously for the proper use of those selected earthquake records.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.46-51
• /
• 1990

Laser plasma was generated by a 1GW iodine photodissociation laser ($\lambda$=1.315$\mu\textrm{m}$, E=12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in a vacuum chamber under 1D-sTorr and several tens of laser shooting were necessary for sufficient exposure for the PBS resist of 111m thickness. Aluminium was coated on the top of the resist by 0.1$\mu\textrm{m}$ thickness which acts as an X-ray filter to cut off the visible and the ultraviolet lights. A bio-specimen was put directly on the aluminium coated resist and located at a distance of 3 cm from the X-ray source. The replicas of a steel mesh, spider's web. and a red blood cell were obtained by this technique and were observed by Nomarski microscope and SEM. The limitation of its resolution is determined by the X-ray source size and Fresnel diffraction effect, and its theoretical prediction is well matched with the experimental results. In this experiment, a resolution better than 0.1$\mu\textrm{m}$ could be obtained. ained.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.1
• /
• pp.34-41
• /
• 2022

In vivo oocytes grow and mature in ovarian follicles whereas oocytes are matured in vitro in plastic culture dishes with a hard surface. In vivo oocytes show a superior developmental ability to in vitro counterparts, indicating suboptimal environments of in vitro culture. This study aimed to evaluate the influence of an agarose matrix as a culture substrate during in vitro maturation (IVM) on the development of pig oocytes derived from small antral follicles (SAFs). Cumulus-oocyte complexes (COCs) retrieved from SAFs were grown in a plastic culture dish without an agarose matrix and then cultured for maturation in a plastic dish coated without (control) or with a 1% or 2% (w/v) agarose hydrogel. Then, the effect of the soft agarose matrix on oocyte maturation and embryonic development was assessed by analyzing intra-oocyte contents of glutathione (GSH) and reactive oxygen species (ROS), expression of VEGFA, HIF1A, and PFKP genes, and blastocyst formation after parthenogenesis. IVM of pig COCs on a 1% (w/v) agarose matrix showed a significantly higher blastocyst formation, intra-oocyte GSH contents, and transcript abundance of VEGFA. Moreover, a significantly lower intra-oocyte ROS content was detected in oocytes matured on the 1% and 2% (w/v) agarose matrices than in control. Our results demonstrated that IVM of SAFs-derived pig oocytes on a soft agarose matrix enhanced developmental ability by improving the cytoplasmic maturation of oocytes through redox balancing and regulation of gene expression.

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.155-170
• /
• 2022

An accurate analysis of structures supported on soft soils and subjected to seismic loading requires the consideration of the soil-foundation-structure interaction. An important aspect of this interaction lies with the energy dissipation due to soil material damping. Unlike advanced constitutive models that can induce energy loss, the use of simple elastoplastic constitutive models requires additional damping. The frequency dependent Rayleigh damping is a formulation that is frequently used in dynamic analysis. The main concern of this formulation is the correct selection of the target damping ratio and the frequency range where the response is frequency independent. The objective of this study is to investigate the effects of the Rayleigh damping parameters in soil-pile-structure and soil-inclusion-platform-structure systems in the presence of soft soil under seismic loading. Three-dimensional analyses of both systems are carried out using the finite difference software Flac3D. Different values of target damping ratios and minimum frequencies are utilized. Several earthquakes are used to study the influence of different excitation frequencies in the systems. The soil response in terms of accelerations, displacements and strains is obtained. For the rigid elements, the results are presented in terms of bending moments and normal forces. The results show that when the frequency of the input motion is close to the minimum (central) frequency in the Rayleigh damping formulation, the overdamping amount is reduced, and the surface spectral acceleration of the analyzed pile and inclusion systems increases. Thus, the bending moments and normal forces throughout the piles and inclusions also increase.