• Korean Journal of Medicinal Crop Science
• /
• v.19 no.3
• /
• pp.198-204
• /
• 2011

This study was performed to enhance antifungal activity of anthracnose in chili pepper by nanopaticles of thiamine di-lauryl sulfate (TDS) through high pressure homogenization process. Yield of TDS was 79.14% by reaction of thiamine hydrochloride and sodium lauryl sulfate. TDS nanopaticle solution was manufactured through high pressure homogenization process. The turbidity of nanoparticles solution was increased with increasing the concentration of TDS, and nanoparticles solution of 100 ppm was showed the highest turbidity with absorbance of 3.212. The size of nanoparticles solution was measured as average 258.6 nm by DLS. Nanoparticles solution of 100 ppm showed growth inhibition activity with higher than about 80% compared to the control group against Colletotrichum gloeosporioides. Finally, nanoparticles solution was increased effectively the penetration of the TDS nanopaticles on attached cell membrane of hyphae and started to destruct the cells under microscope observation. Consequently, we suggested that the TDS nanoparticle solution by high pressure homogenization process might be suitable biochemical pesticides for improving the antifungal activities against anthracnose in pepper.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.249-253
• /
• 2001

A proposed method of determining the composition of mixed micelles in equilibrium with monomer of known composition is described. The systems were sodium ${\alpha}-sulfonated$ dodecanoyl ethyl esther (${\alpha}-SR_{12}Et$) or sodium dodecyl sulfate(SDS)-polyoxyethylene 23 lauryl ether (Brij 35) un water and in 0.1M sodium chloride solution at $25^{\circ}C$. This technique applies the Gibbs-Duhem equation to the mixed micelles, which is treated as a pseudophase. This proposed methodology, which needs only critical micelle concentration data as a function of monomer composition, is applied to an anionic/nonionic surfactant pair. The calculated monomer-micelle equilibrium is found to be very similar to the much-used regular solution for nonideal systems.

• Journal of radiological science and technology
• /
• v.2 no.1
• /
• pp.89-93
• /
• 1979

Fricke dosimeter solution in chemical dosimeters consists of Ferrous sulfate, Sodium chloride and Sulfuric acid. Authors made a new experiment on the characteristics of dosimeter solution with Ammonium Thiocyanate and the results obtained were as follows; 1. The chemical oxidation response after irradiation was very rapid(within fifteen minutes). 2. A preventive measure of the spontaneous oxidation as time goes on was possible to use 0.1 mM instead of 1mM Ferrous sulfate solution. 3. 477nm in wavelength of spectrophotometer was most ideal to measure optical density in this solution

• Resources Recycling
• /
• v.30 no.1
• /
• pp.35-43
• /
• 2021

In this study, Na2SO4 and KCl reagents were used to synthesize K2SO4 as a basic study for recycling byproducts generated during the manufacture of steel and cement. The mole ratio of Na2SO4 to KCl, the saturation of the solution, and the stirring temperature were controlled to derive the optimal manufacturing conditions. The microstructure and crystallinity of the materials prepared were evaluated using scanning electron microscopy and X-ray diffraction analysis. Pure K2SO4 was obtained when the mole ratio of Na2SO4 to KCl was 1:6-18, the saturation of the solution was less than 160%, and the stirring temperature was 20℃, 50℃. The optimal manufacturing conditions to maximize the crystallinity and yield of K2SO4 while minimizing the energy consumption were 1:6 mole ratio of Na2SO4 to KCl, 140% saturation of the solution, and 20℃ stirring temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.55-60
• /
• 1998

The sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers, which are oligomer type surfactants were prepared by polymerization with fatty acid vinyl acetate. The ${\alpha}-sulfonation$ of fatty acid vinyl ester oligomers were carried by direct addition of sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS) in the aqueous suspension of iron oxide and titanium dioxide particles was evaluated by particle size distribution and zeta-potential measurement. As results, the particles of iron oxide and titanium dioxide were flocculated by addition of small amount of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS), then the flocks redispersed by more addition of oligomer type anionic surfactants and SDS. The flocculation, redispersion process was observed in lower concentration range of oligomer type anionic surfactants than SDS. Especially, the dispersing action of sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer was better than sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.94-101
• /
• 2016

This paper presents an investigation into the durability alkali-activated materials(AAM) mortar and paste samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS) exposed to a sulfate environment with different GGBFS replace ratios(0, 30, 50 and 100%), sodium silicate modules($Ms[SiO_2/Na_2O]$ 1.0, 1.5 and 2.0) and initial curing temperatures($23^{\circ}C$ and $70^{\circ}C$). The tests involved immersions for a period of 6 months into 10% solutions of sodium sulfate and magnesium sulfate. The evolution of compressive strength, weight, length expansion and microstructural observation such as x-ray diffraction were studied. As a results, as higher GGBFS replace ratio or Ms shown higher compressive strengths on 28 days. In case of immersed in 10% sodium sulfate solution, the samples shows increase in long-term strength. However, for samples immersed in magnesium sulfate solutions, the general observation was that the compressive strength decreased after immersion. The most drastic reduction of compressive strength and expansion of weight and length occurred when GGBFS or Ms ratios were higher. Also, the XRD analysis of samples immersed in magnesium sulfate indicated that expansion of AAM caused by gypsum($CaSO_4{\cdot}2H_2O$); the gypsum increased up to 6 months continuously.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.821-824
• /
• 2006

As this study is to estimate long term resistance of cement mortars using crushed sand under chemical attacks. Besides tests have been carried out with cement mortars by river sand and crushed sand by fine sand, cement mortars mix various proportions of silica fume and fly ash(up to 15% and 50% by weight for cement) were prepared and immersed in pure water, sodium sulfate solution, magnesium sulfate solution, seawater for 28days, 90days, 180days, 365days. Test on the change in the weight and compressive strength of cement mortars according to the duration of immersion time and the content of silica fume and fly ash was performed.

• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.66-72
• /
• 1988

The effect of salts on the formation of ${\alpha}$-hemihydrated gypsum at boiling temperature under atmospheric pressure was studied by the solubility measurement method, and the formation of ${\alpha}$-hemihydrated gypsum from by-product gypsum of phosphoric acid process in the salts solution were investigated. The order of catalytic effect of salt on the formation of ${\alpha}$-hemihydrated gypsum are as follows: NH4Cl>NaCl>NaNO3. In the salts solution of sodium nitrate, sodium chloride, and ammonium chloride, prismatic ${\alpha}$-hemihydrated gypsum was obtained and the crystal form was converted to needle form in complex solution with sulfuric acid. The P2O5 content in gypsum was largely decreased in this atmosphoric solution process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.2
• /
• pp.69-72
• /
• 2021

The reaction of ammonium ferric sulfate with sodium borohydride in laponite sol yields nanoiron colloidal solution. This solution in air forms transparent yellow brown solution. The resulting solution reacts with bidentate chelating ligands. The reaction products are characterized by UV-Vis absorption spectroscopy and X-ray diffraction. All compounds show metal to ligand charge transfer band in the region of 400~650 nm in UV-Vis absorption spectra. This indicates the formation of iron-ligand complex by air oxidation of nanoiron. Also, XRD patterns exhibit that the iron-ligand complex is intercalated in the interlayer of laponite.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.779-785
• /
• 1994

The interaction between the cationic dye, thionin(Th) and the anionic surfactant, sodium dodecyl sulfate (SDS) has been investigated by absorption spectra. As the temperature of surfactant solution was increased in premicellar range(S/D=10, 80, and 160) which was much lower than the critical micelle concentration(CMC), the increment or decrement of the molar extinction coeffecient ratio appeared. It was found that the most stable temperature range of the oligomer aggregate in Th-SDS system at S/D=160 was below $60^{\circ}C$. With increasing the concentration of inorganic salt and organic solvents in Th-SDS system, ${\alpha}$-band was increased, but ${\gamma}$=band or J-band was decreased. The orders of ${\alpha}$-band increasing power were $Cl^-$>$ClO{_4}{^-}$>$SO{_4}{^{2-}}$>$NO{_3}{^-}$ and 2-propanol>ethanol>methanol>ethylene glycol.