• Resources Recycling
• /
• v.14 no.6 s.68
• /
• pp.3-9
• /
• 2005

In this study, the separation and recovery of cerium hydroxide was investigated from the wasted cerium polishing powders. Waste cerium polishing powder contains $64.5\;wt\%$ of rare earth oxide and the content of cerium oxide is $36.5\;wt\%$. Since cerium oxide, $56.3\%$ of rare earths, is the most stable state in rare earth, the dissolution of cerium oxide in acid solution is not easy. Therefore the process of rare earth oxide by sulfation and water leaching was examined in order to increase the recovery of rare earth. Rare earth elements were recovered in the form of $\Re{\cdot}Na(SO_{4})_{2}$ by the addition of sodium sulfate to leached solution. The slurry of rare earth hydroxide was prepared by the addition of $\Re{\cdot}Na(SO_{4})_{2}$ to sodium hydroxide solution. After the oxidation of cerous hydroxide($CE(OH)_{3}$) to ceric hydroxide($CE(OH)_{3}$) by aeration, ceric hydroxide was separated from other rare earth hydroxides by controlling the acidity of solution.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.49-56
• /
• 2021

In this study, using strontium sulfate (SrSO₄) recovered from magnetite ore in Hongcheon, the Black Ash process was used to produce strontium carbonate (SrCO₃). In the carbothermic reaction step, SrSO₄ was reacted with carbon (C) at 1273 K under Ar gas atmosphere using a gas-tight quartz reactor to produce strontium sulfide (SrS). Afterward, water leaching of the residues produced from the carbothermic reaction at 353 K and carbonation of the leaching solution using sodium carbonate (Na₂CO₃) at 298 K were conducted to produce SrCO₃. The results of this study demonstrate the feasibility of the production of SrCO₃ via the Black Ash process using domestic magnetite ore containing strontium (Sr).

• The Journal of Internal Korean Medicine
• /
• v.29 no.2
• /
• pp.385-400
• /
• 2008

Objectives : This study was carried out to investigate the effects of Soyumjungjang-tang(SJT) on the experimental ulcerative colitis induced by dextran sulfate sodium(DSS) in mice. Methods : Ulcerative colitis was induced through supplying 4% DSS solution as the drinking water for 7 days in 6-week-old male ICR mice. The colitic mice were divided into three groups: the sample groups were orally administered SJT in doses of 25mg/kg(S25 group) or 100mg/kg(S100 group) once a day for 10 days, from 3 days before starting drinking the DSS solution, and the control(C) group was administered normal saline instead of SJT. The DSS solution or SJT was not administered to the normal(N) group. The length of colon, histologic finding, the activities of myeloperoxidase(MPO) and alkaline phosphatase(AP), and the expressions of $IL-1{\beta}$, IL-6, COX-2, $NF-{\kappa}B$, and $I{\kappa}B$ in colonic mucosa was checked using immunoblot, ELISA, etc. The activities of chondroitinase, tryptophanase, ${\beta}-glucuronidase$ and ${\beta}-glucosidase$ in stool were also measured. Results : The length of colon shortened, histologic finding deteriorated, the activities of MPO, AP, chondroitinase, tryptophanase, ${\beta}-glucuronidase$ and ${\beta}-glucosidase$, and the expressions of $IL-1{\beta}$, IL-6, COX-2, $NF-{\kappa}B$ increased, and the expression of $I{\kappa}B$ decreased in the C group. All measures, except $NF-{\kappa}B$, were restored in S25 group, but some measures deteriorated more in the S100 group than in the C group. Conclusions : According to the above results, it is supposed that SJT has a potential therapeutic effect on ulcerative colitis.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.276-283
• /
• 1977

Reduction of dichromate at a platinum cathode in acid solution was studied by cyclic voltammetry and controlled potential electrolysis. Cathodic polarization curve consisted of three waves in unbuffered solution of potassium dichromate having initial pH ranges 1.5∼4.0, with sodium sulfate as the supporting electrolyte. Relative heights of the first and the second waves were, respectively, a function of chromium (Ⅵ) concentration and activity of hydrogen ion, but that of the third wave was not proportional to both of them. The current of the first two peaks were proportional to the sweep rate of potential (${\nu}$), while that of the last peak vs. ${\nu}^{1/2}$ was linear at the sweep rate of less than 50mV/sec. By the controlled potential electrolysis, the reduction of chromium (Ⅵ) was almost completely suppressed at potentials more negative than the last peak and at initial pH's above ca. 2.3 of unbuffered solution. Therefore, these peaks represented, respectively, $Cr_2O_7^{2-}{\to}Cr^{3+},\;2H^+{\to}H_2$ and the formation of a cathodic film.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.5
• /
• pp.681-687
• /
• 2020

Physicochemical properties of fucoidan and alginate extracted from Sargassium horneri were investigated. The alginates were extracted and purified via three different routes (CaCl₂, HCl and ethanol routes), and their rheological properties at various concentrations and temperatures were determined. The yield of fucoidan was 3.08%, and it was mainly composed of fucose and galactose. Fourier-transform infrared spectrum of fucoidan showed strong absorption band at 1,254 and 827 cm^-1 corresponding to the sulfate group. Flow behavior of the alginate solution was characterized using the power-law model. The consistency index increased with increasing concentrations. The sodium alginate solution (1.5%) exhibited Newtonian behavior when extracted via the CaCl₂ and HCl routes, while it exhibited pseudoplastic behavior when extracted via the ethanol route. The effect of temperature on the flow behavior was investigated in terms of the activation energy (E_a), which was obtained using the Arrhenius equation. The E_a value corresponding to the alginate solution decreased with increasing shear rates. The E_a values corresponding to the alginate solutions purified via the CaCl₂, HCl, and ethanol routes were 13.54-18.64 kJ/mol, 13.42-19.21 kJ/mol, and 9.51-10.67 kJ/mol, respectively. The low E_a values corresponding to the solutions extracted via the ethanol route suggest that the flow behavior does not depend significantly on temperature.

• Advances in nano research
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2020

In order to develop a new adsorbent for removal of formaldehyde from aqueous solution, surface modification of TiO₂ nanoparticles was performed with 2,4-Dinitrophenylhydrazine (DNPH) that have a strong affinity to the formaldehyde. Sodium dodecyl sulfate (SDS) surfactant was used to improve the DNPH grafting to TiO₂ surface. Modified adsorbents were characterized by SEM, TEM, XRD, EDX and FTIR. Since the COD level in wastewaters including formaldehyde is considerable, it is necessary to determine the COD content of the synthetic wastewater. In order to determine the optimal removal conditions, the effect of contact time (60-210 min), pH (4-10) and adsorbent dosage (0.5-1.5 g/L) on adsorption and COD removal efficiencies were studied, using response surface method. EDX and FTIR analysis confirmed the presence of nitrogen-containing functional groups on the modified TiO₂ surface. The maximum formaldehyde adsorption and COD removal efficiencies by modified TiO₂ were about 15.65 and 7.35% higher than the unmodified nanoparticles respectively. Therefore, the grafting of nano-TiO₂ with DNPH would greatly improve its formaldehyde adsorption efficiency. The optimum conditions determined for a maximum formaldehyde removal of 99.904% and a COD reduction of 94.815% by TiO₂/SDS/DNPH nanocomposites were: adsorbent dosage 1.100 g/L, pH 7.424 and the contact time 183.290 min.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.62-62
• /
• 2003

This study was carried out to investigate the effects of activation agents on parthenogenetic activation of pig oocytes matured in vitro. The medium used for oocyte maturation was tissue culture medium (TCM) 199 supplemented with 26.19 mM sodium bicarbonate, 0.9 mM sodium pyruvate, 10 $\mu\textrm{g}$/ml insulin, 2 $\mu\textrm{g}$/ml vitamin $B_{l2}$, 25 mM Hepes, 10 $\mu\textrm{g}$/ml bovine apotransferrin, 150 $\mu$M cysteamine, 10 IU/ml PMSG, 10 IU/ml hCG, 10 ng/ml EGF, 0.4% BSA, 75 $\mu\textrm{g}$/ml sodium penicillin G, 50 $\mu\textrm{g}$/ml streptomycin sulfate and 10% pFF. After about 22 h of culture, oocytes were cultured without cysteamine and hormones for 22 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. Cumulus-free oocytes involving first polar body were activated by exposure to various concentrations of ethanol and exposure time of ethanol in Hepes-buffered NCSU23 medium. Also, oocytes were activated by electric pulse alone or combination with ethanol. For electrical activation, oocytes were rinsed twice in 0.3 M mannitol solution supplemented with 0.1 mM CaC1$_2$, 0.2 mM MgC1$_2$, 0.5 mM Hopes and 0.01% BSA, and transferred to a chamber consisting of two electrodes 1 mm apart which was overlaid with the same activation solution. Oocytes were activated with a single DC pulse of 1.3 ㎸/cm for 30 $\mu$sec. After activation treatments, oocytes were washed three times with Hepes-buffered NCSU23 medium and were washed twice with NCSU23 culture medium containing 0.4% BSA, and then cultured in 500 ${mu}ell$ of the same medium for 20 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. The activation rates of oocytes were higher in 6, 7 and 8% ethanol concentrations compared with 0, 5, 9 and 10% ethanol concentrations. Significantly more oocytes (29.3~33.7%) were activated in the exposure for 8, 10, 12 and 15 min than those in the exposure for 0 and 5 min, but there was no difference due to exposure to 8% ethanol for 8 to 15 min. Electric pulse treatment followed by exposure to ethanol significantly improved the rate of oocyte activation (61.9%) compared with that of other 3 treatments. In conclusion, the optimal activation treatment of ethanol exposure alone for the in-vitro matured pig oocytes was 8% ethanol for 8 to 15 min. Electric pulse treatment followed by ethanol exposure significantly improved the rate of activation.n.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.26-33
• /
• 2022

Molybdenum is widely used in many materials; thus, its recovery from ores and secondary resources has attracted considerable attention. In this study, the leaching of molybdenite ore using hydrochloric acid containing sodium chlorate as an oxidizing agent was studied. The effects of several variables, such as the concentrations of HCl and NaClO₃, reaction temperature and time, and pulp density, on the leaching of the ore were investigated. Under strong acidic and oxidizing conditions, the sulfide in the ore was dissolved as a sulfate ion, which formed gypsum with Ca(II), leading to a decrease in the leaching percentage of Mo(VI) from the ore. The leaching percentage of molybdenum was greater than 90%, while those of iron, calcium, and silicon were 38, 29, and 67%, respectively, under the optimum conditions: 2.0 M HCl, 0.5 M NaClO₃, pulp density of 5 g/L, temperature of 90 ℃, and treatment time of 60 min.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.2
• /
• pp.78-83
• /
• 2005

The optimum conditions of Cordyceps militaris mycelial growth, purification and characteristics of branched-chain amino acid aminotransferase [BCAT(EC 2.6.1.42)] in this mycelium were studied. Optimum pH, temperature and medium of culture of mycelia were 5.5, $22.5^{\circ}C$ and Hamada medium (HM), respectively. BCAT in homogenate of this mycelia was precipitated by 20-40% saturated solution of ammonium sulfate and then purified by DEAE (diethylaminoethyl)-Sephadex A-50 column chromatography with linear concentration gradient and Sephadex G-200 gel filtration. A single band of purified enzyme was detected on SDS-PAGE (sodium dodecylsulfate-polyacrylamide gel electrophoresis). Optimum pH and temperature of BCAT were found to be 7.8 and $29^{\circ}C$, respectively. It showed activity toward L-leucine, L-isoleucine and L-valine as a substrate. The Km values of this enzyme for L-leucine were determined to be 5.88 mM for L-leucine.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.449-456
• /
• 2013

This study was carried out to assess the suitability in terms of the standards of material quality of basalt aggregates from JEJU Island as a source for concrete aggregate. Quality assessments on the basalt aggregates were performed to assess the soundness of coarse aggregates using sodium sulfate solution, aggregate crushing test, and Los Angeles abrasion test. In addition, XRD, XRF, porosity, and compressive and tensile strength tests were performed to analyze the chemical components and the mechanical properties. In general, the mechanical properties of basalt aggregates from some areas did not meet the Korea Standards (KS), but the levels of compressive and tensile strength were higher than those of granite, andesite, and sandstone of other regions.