• Journal of environmental and Sanitary engineering
• /
• v.7 no.1
• /
• pp.57-66
• /
• 1992

To investigate on the element content of twelve edible mushrooms and Aloe arborescent, i.e., Lentinus edodes, Ganoderma lucidum (culturing in wood and soil), Tricholoma matsutake, Agaricus auricula-Jude (produced in Korea and China), sarcodon asparatus, Pleurotus ostreatus, Coriolus bisporus, Cyrophora esculenta, Auricularia auricula-Jude (produced in Korea and China), Sarcodon asparatus, Pleurotus ostreatus, Coriolus rersicolor, Smilax rotundifolia and Aloe arborescenstyl were analyzed by Atomic absorption spectrometer. The obtained results were summarized as follows : 1. Potassium, sodium, magnesium and iron content for the most part samples were in large quantities, especi phosphorus content of those was highest ammount for the all samples. 2. Sodium content f·as much ammount in the Lentinus edodes(39 mg, and Ganoderma lucidum(20 mg) , Culturing in wood and soil, while potassium was very high ammount in the Aloe arborescens and other samples. Mush ammount of magnesium as compared with others was Lentinus edodes(144 mg) , Ganoderma lucidum(128 mg), Aloe arborescens(50 mg) and Pleurotus ostreatus (60 mg) . 3, Phosphorus content of Lentinus edodes, Gyrophora esculenta, Auricularia polytricha and Agaricus bisporus was much ammount while iron content of all samples equality higher ammount. Sodium content of Aloe arborescens was not analyzed out for almost all, its potassium(82 mg), magnesium(50 mg) and iron(18 mg) content comparatively higher quentity than others nllnerals and phosphorus volume (4.9 mg) as compared with others, was conspicuously lower detect. 4. Cadimium and lead content of harmful metal element were detected on trace quantity for the most part samples. 5. Organic acids of samples i.e., Lentinus edodes, Agaricus bisporus, Pleuritus ostreatus and Ganoderma lucidum were Citrate, Malate, Fumalate, Succinate, Oxalate, Acetate, Lactate, and Tartarate and Citrate, Malate and Fumarate contents were higher amount remarkbly than other organic acids. Tartarate content was trace amount.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.58-68
• /
• 2012

An investigation was conducted on the enhancement of production and purification of an oxidant and SDS-stable alkaline protease (BHAP) secreted by an alkalophilic Bacillus horikoshii, which was screened from the body fluid of a unique Korean polychaeta (Periserrula leucophryna) living in the tidal mud flats of Kwangwha Island in the Korean West Sea. A prominent effect on BHAP production was obtained by adding 2% maltose, 1% sodium citrate, 0.8% NaCl, and 0.6% sodium carbonate to the culturing medium. The optimal medium for BHAP production contained (g/l) SBM, 15; casein, 10; $K_2HPO_4$, 2; $KH_2PO_4$, 2; maltose, 20; sodium citrate, 10; $MgSO_4$, 0.06; NaCl, 8; and $Na_2CO_3$, 6. A protease yield of approximately 56,000 U/ml was achieved using the optimized medium, which is an increase of approximately 5.5-fold compared with the previous optimization (10,050 U/ml). The BHAP was homogenously purified 34-fold with an overall recovery of 34% and a specific activity of 223,090 U/mg protein using adsorption with Diaion HPA75, hydrophobic interaction chromatography (HIC) on Phenyl-Sepharose, and ion-exchange chromatography on a DEAE- and CM-Sepharose column. The purified BHAP was determined a homogeneous by SDS-PAGE, with an apparent molecular mass of 28 kDa, and it showed extreme stability towards organic solvents, SDS, and oxidizing agents. The $K_m$ and $k_{cat}$ values were 78.7 ${\mu}M$ and $217.4s^{-1}$ for N-succinyl-Ala-Ala-Pro-Phe-pNA at $37^{\circ}C$ and pH 9, respectively. The inhibition profile exhibited by PMSF suggested that the protease from B. horikoshii belongs to the family of serine proteases. The BHAP, which showed high stability against SDS and $H_2O_2$, has significance for industrial application, such as additives in detergent and feed industries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.4
• /
• pp.395-400
• /
• 1991

Effects of Various Chemical Substrates on Heat Resistance of Isolated EnterobTo pursue the various properties of Enterobacter sp. which may give an outbreak of food-borne disease to man, isolated from the meats and the small intestines of wild mice, and to offer the significant data in the fields of food hygiene and public health this study was carreied, 5 strains of Enterobacter sp. were isolated from the above samples. 5 strains isolated from sample sources were 1 strain (E. aerogenes) from the beeves, 2 strains (E. aerogenes, E intermedium) from the pork and 2 strains (E. aerogenes, E. cloacae) from the small intstines of wild mice. Of total isolatd 89 strains, including non-Enterobacter sp., these numbers of 5 isolates were showed as 5.6% of dection rate. On heating at temperature of $55^{\circ}C$ for 30min., these 5 stratins were generally more resisted in the 0.1M phosphate buffer when such chemical substrates as 0.1M glycine, 5% mannitol or 0.5% sorbitol was added to it whereas they were appeared weaker resistances in 0.1M phosphate buffer when 1% sodium citrate, 1% casein, 10% sodium chloride or 0.1M systein was infused into it.cter sp.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.1
• /
• pp.101-109
• /
• 2010

Efficient L-lactic acid production from Jerusalem artichoke tubers, by Lactobacillus casei G-02, using simultaneous saccharification and fermentation (SSF) in a fed-batch culture, is demonstrated. A kinetic analysis of the SSF revealed that the inulinase activity was subjected to product inhibition, whereas the fermentation activity of G-02 was subjected to substrate inhibition. It was also found that the intracellular NADH oxidase (NOX) activity was enhanced by the citrate metabolism, which dramatically increased the carbon flux of the Embden-Meyerhof-Parnas (EMP) pathway, along with the production of ATP. As a result, when the SSF was carried out at $40^{\circ}C$ after an initial hydrolysis of 1 h and included a sodium citrate supplement of 10 g/l, an L-lactic acid concentration of 141.5 g/l was obtained after 30 h, with a volumetric productivity of 4.7 g/l/h. The conversion efficiency and product yield were 93.6% of the theoretical lactic acid yield and 52.4 g lactic acid/l00 g Jerusalem artichoke flour, respectively. Such a high concentration of lactic acid with a high productivity from Jerusalem artichokes has not been reported previously, making G-02 a potential candidate for the economic production of L-lactic acid from Jerusalem artichokes on a commercial scale.

• Korean Journal of Veterinary Research
• /
• v.15 no.2
• /
• pp.207-213
• /
• 1975

Skimmed goat milk heated at $92^{\circ}C$ for 10 minutes was used as a basal extender for bull semen. The extenders for liquid semen were prepared by adding simultaneously at various ratio of 5% dextrose solution and egg yolk to skimmed goat milk. After bull seven was diluted with the extenders at the rate of 20 million spermatozoa per ml of the extenders. The extenders were stored at $5^{\circ}C$ and the survival rates of spermatozoa were examined at 4 and 24 hours, and 3, 5 and 7 days after dilution. The extenders for frozen semen were prepared by adding various ratlo of glycerol to skimmed goat milk containing 20 parts of 5% dextrose solution and 3 parts of egg folk to 77 parts of skimmed goat milk. After bull semen was diluted with the extenders at the rate of 40 million spermatozoa per ml of the extenders, the extenders were frozen in liquid nitrogen tank. The frozen extenders were thawed at $40^{\circ}C$ for 2 minutes, and the revival rates of the spermatozoa in the extenders were examined. These thawed extenders were stored at $5^{\circ}C$ and the survival rates of the spermatozoa were examined at 10 minutes and 24 hours and 3 and 5 days after thawing. The results obtained were as follows: 1. Among the extenders stored at $5^{\circ}C$, the survival rate of the sperm was the highest in the extender including 20 parts of 5% dextrose solution and 3 parts of egg yolk to 77 parts of skimmed goat milk, and the survival rate was significantly higher that of the spermatozoa in egg folk-2.9% sodium citrate (1 : 4) extender. (P<0.05) 2.Among the extenders frozen in liquid nitrogen tank, the revival rate of the spermatozoa was the highest in the extender containing 7ml of glycerol per 100ml of the extender with consisted of 77 parts of skimmed goat milk, 20hparts of 5% dextrose solution and 3 parts of egg yolk, and the revival rate was significantly higher than that of the spermatozoa in egg yolk-2.9% sodium citrate (1 : 4) extender containing 8ml of glycerol per 100ml of the extender (p<0.01). 3. Among the extenders stored at $5^{\circ}C$ after thawing, the survival rate of the spermatozoa was the highest in the extender containing 7ml of glycerol per 100ml of extender which consisted of 77 parts of skimmed goat milk, 20 parts of 5% dextrose solution and 3 parts of egg yolk, and the survival rate was significantly higher than that of the spermatozoa in egg yolk -2.9% sodium citrate (1 : 4) extender containing 8ml of glycerol per 100ml of the extender (p<0.01).

• Journal of environmental and Sanitary engineering
• /
• v.9 no.1
• /
• pp.76-88
• /
• 1994

This study was carried out to investigate contents of nitrosamine precursors such as trite and dimethylamine( DMA ) in some foods. The diazo and Cu- dithiocarbamate melt were used for determination, respectively. The major affecting factors of Nnitrosodimethylamine( NDMA ) formation such as pH, contents of DMA and NaNO$_{2}$, other chemicals, and UV- ray in beverage were investigated in vitro. The contents of nitrite in meat sausage and meat ham were 6.44 ∼ 18.66ppm and 12.85- 39.95pp% respectively, And extremely low level was detected in a certain kind of fish sausage. The contents of DMA in meat sausage meat ham and fish sausage were 3.34∼15. 85ppm, 1.20∼7.10ppm and 7.38∼12.28ppm, respectively. The optimum pH for NDMA formation in vitro was 3.0. NDMA formation was rapidly occurred at high temperature and formed above 80% within 1 hour reaction. The formation of NDMA was increased in proportion to the concentration of DMA and the square of the nitrite concentration. 0.1 M of sodium citrate, sodium tartarated and sodium taiocyanate enhanced NDMA formation. But sodium chloride did not affect. However, 0.3M of ascorbic acid, erythroid acid, ascorbic, palmitate and propy, gallate inhibited NDMA formalion approximately 78%,81%,86% and 85%, respectively. Cow milk and soybean milk inhibited 35 ∼47% of NDMA formation but orange juice and apple juice enhanced 15 ∼64% of NDMA formation. The peak in HPLC for NDMA disappeared by irradiation of UV to prior formed NDMA This result suggest that NDMA was destroyed by UV irradiation.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.2
• /
• pp.126-134
• /
• 2000

This study investigated the bath compositions and plating conditions and crystal structure used for achieving nickel-thallium-phosphorus deposits by means electroless plating. The electroless nickel-thallium-phosphorus deposits were achieved with a bath using sodium hypophosphite as the reducing agent and sodium citrate as the complexing agent. The depositing rate was 10.5mg.$cm^{2-1}$ .$hr^{-1 }$ from the optimistic bath composition, 0.1M nickel sulfate, 0.005M thallium sulfate, 0.2M sodium hypophosphite, and 0.05M sodium citrat and the recommended plating conditions, pH 5.5 and $90^{\circ}C$. The composition of alloy deposits determined by X-ray analysis (EDS) that the Thallium was increased with major increasing concentration of complexing agent and thallium ion in bath solution, it decreased according to the increasing concentrations of reduction agent in the bath solution, Bit Phosphorus showed a contrary to the thallium. It was observed from X-ray diffraction analysis, Scanning Electron Microscopy and Transmission Electron Microscopy. The crystalline structure of deposits was amorphous at the first deposited state but it was changed $Ni-T1-Ni_{5}$ $P_2$ polycrystalline when subjected to 1 hour heat treatment of more than $350^{\circ}C$. TEM observation demonstrated that the microstructure was identical to the result of the XRD at as deposited but it became $Ni-Tl-Ni_{5}$ $P_2$ polycrystalline when heated. And grain size was 10-50nm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.376-380
• /
• 2000

This study was conducted to investigate protein and carbohydrate utilization of Micrococcus varians, Staphylococcus carnosus and Staphylococcus xylosus. Sensitivity to pH, sodium chloride, potassium sorbate and sodium nitrite of these strains was also determined. In Chinese-style beaker sausage manufacturing, the growth rate of these strains during the curing period ($20^{\circ}C$ and $30^{\circ}C$) was evaluated. The results indicated that no strains could hydrolyze azo-casein and sarcoplasmic protein and only S. xylosus could hydrolyze gelatin at $30^{\circ}C$. All of these strains could oxidize and ferment fructose and mannitol. S. carnosus and S. xylosus could slightly oxidize lactose and utilize citrate. Arabinose was oxidized by S. xylosus and sorbitol was oxidized by S. carnosus. Growth of M. varians was restricted at pH 5.0 and S. carnosus and S. xylosus were restricted at pH 4.5. S. xylosus and S. carnosus were able to grow with 0.1~0.5% potassium sorbate, 50~200 ppm sodium nitrite or 1~15% sodium chloride. S. xylosus had a higher growth rate than the other strains. Staphylococcus species grew well during curing period of Chinese-style beaker sausage then followed by Micrococcaceae.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.46-52
• /
• 2006

The effects of surface treatment on the hydrogen storage properties of a $Mg_2Ni$ alloy particle were investigated by the microvoltammetric technique, in which a carbon-filament microelectrode was manipulated to make electrical contact with the particle in a KOH aqueous solution. It was found that the hydrogen storage properties of $Mg_2Ni$ at room temperature were improved by the surface treatment with a nickel plating solution. The sodium salts(sodium phosphate and sodium dihydrogen citrate) contained in the nickel plating solution made the alloy form an amorphous-like state, resulting in an improved hydrogen charge/discharge capacity at room temperature as high as about 150[mAh/g] from the original value of 17[mAh/g]. Potential-step experiment was carried out to determine the apparent chemical diffusion coefficient of hydrogen atom($D_{app}$) in the alloy. Since the alloy particle we used here was a dense, conductive sphere, the spherical diffusion model was employed for data analysis. $D_{app}$ was found to vary the order between $10^{-8}{\sim}10^{-9}[cm^2/s]$ over the course of hydrogenation and dehydrogenation process.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.319-327
• /
• 2000

This study was conducted to prolong the edible period of Kimchi by adding chitosan (0.25, 0.5%) and sodium salts of various organic acids(0.01~0.04M citrate, malate, lactate) . The edible period was estimated by measuring changes in pH. titratable acidity(TA), PH/TA ratio, ascorbic acid content and pectin fraction during Kimchi fermentation at 2$0^{\circ}C$. The results were compared by estimating the maturity of Kimchi fermentation. Kimchi with the chitosan showed higher pH and titratable acidity throughout the fermentation period than that without chitosan. The pH decreased during the fermentation in the order of control, 0.25% chitosan, 0.5% chitosan, 0.5% chitosan+Na-citrate, 0.5% chitosan+Na-malate and 0.5% chitosan+Na-lactate. But the titratable acidity increased in the order of control, 0.5% chitosan+Na-malate, 0.25% chitosan. 0.5% chitosan+Na-citrate, 0.5% chitosan and 0.5% chitosan+Na-lactate. The PH/TA ratio decreased in the order of control, 0.25% chitosan, 0.5% chitosan+Na-malate, 0.5% chitosan, 0.5% chitosan+Na-citrate and 0.5% chitosan+Na-lactate. Ascorbic acid content in Kimchi was the highest at the 3rd day and then decreased during fermentation. Ascorbic acid content in Kimchi containing 0.5% chitosan and organic acid salts was higher than others. Alcohol insoluble solids( AIS ) in Kimchi decreased during fermentation in the order of control, 0.25% chitosan, 0.5% chitosan, 0.5% chitosan+Na-palate. 7.5% chitosan+Na-lactate and 0.5% chitosan+Na-citrate. During fermentation, hot water soluble pectin (HWSP) of control increased, whereas HCI soluble pectin (HCISP) decreased. By addition of chitosan, however, the results became reverse. Chitosan addition appeared to be effective in improving preservation quality of Kimchi during fermention. The edible period become extended by using chitosan plus organic acids instead of using chitosan only. Overall. addition of 0.5% chitosan+Na-lactate seemed most effective in prolonging the edible periods during Kimchi fermentation.