• 약학회지
• /
• 제8권2호
• /
• pp.45-47
• /
• 1964

Two new orotic acid derivatives orotyl-DL-alanine and orotyl-L-tyrosine were synthesized. They were obtained as high melting crystalline masses by condensing DL-alanine and L-tyrosine each with orotyl chloride in aqueous sodium hydroxide solution, followed by acidifying the reaction mixture.

• 한국결정성장학회지
• /
• 제29권5호
• /
• pp.222-228
• /
• 2019

본 연구는 수산화리튬, 염화리튬, 그리고 황산리튬을 이용한 리튬 함유 용액과 $CO_2$ 가스와의 기상-액상 반응을 통하여 탄산리튬 분말을 제조하는 실험을 실시하였다. 열역학적으로 리튬 함유 용액의 탄산화 반응에서 수산화리튬은 자발적으로 일어나지만, 염화리튬과 황산리튬은 비자발적이었다. 수산화리튬의 경우, $25^{\circ}C$의 반응온도에서 탄산리튬의 회수율이 69.8 %였으며, $60^{\circ}C$에서는 89.4 %로 증가하였다. 염화리튬과 황산리튬의 경우, 수산화나트륨을 첨가제로 사용하여 탄산리튬을 제조할 수 있었으나, 회수율은 각각 19.2 %와 16.7 %로 비효율적임을 알 수 있었다.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.198-202
• /
• 2006

Cadmium selenide (CdSe) nanoparticles with the diameter of about 3.4nm have been synthesized from the mixed aqueous solution of distilled water and diethanolamine at room temperature. The cadmium chloride ($CdCl_2$), sodium selenosulfate ($Na_2SeSO_3$) were used as the cadmium and selenium source, respectively. The properties of CdSe nanoparticles were characterized by using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and UV-Vis measurements. CdSe nanoparticles were analyzed to be cubic phase with the absorption excition peaks between 540 and 600 nm. CdSe nanoparticles also showed red-shifted excition peaks with increasing the sonication time. This paper mainly presents the sonication effects on the formation of CdSe nanoparticles prepared from the mixed aqueous solution of distilled water and diethanolamine.

• 한국염색가공학회지
• /
• 제9권1호
• /
• pp.33-43
• /
• 1997

This study was carried out to investigate increasing the neutral substantivity of anionic dyes for cationic-modified cotton fabric treatied with cationic agent. In the present study 3-chloro-2-hydroxypropyltrimethyl ammonium chloride for reactive cationic agent was produced by reaction of epichlorohydrine with trimethylamine hydrochloride. 3-chloro-2-hydroxypropyltrimethylammonium chloride was converted in an aqueous solution of sodium hydroxide into glycidyltrimethylammonium chloride. By treating with this epoxy reagent the hydroxyl groups of cotton fabric was modified to trimethylammonium group through ether linkage. The introduction of new cationic sites into cotton fabric by pretreating with cationic agent improves the substantivity of anionic dyes with the cotton in dyebath. Dyeablity of the modified cotton fabric for direct and reactive dyes was much improved in a non-electrolytic or a little electrolytic dyebath and was proportional to the concentration of cationic agent.

• 폴리머
• /
• 제28권2호
• /
• pp.111-120
• /
• 2004

반복 단위마다 양전하를 띄고 있는 폴리(디알릴디메틸암모늄 클로라이드) (PDADMAC)와 음이온 계면활성제인 도데실 황산 소듐 (SDS)와의 상호작용을 광산란법, 탁도법 및 형광법을 이용하여 조사하였다. 0.3 M NaCl 수용액에서의 PDADMAC는 마치 좋은 용매에서 팽창되어 있는 중성 고분자처럼 존재하나, SDS를 첨가함에 따라 이들 사이의 상호작용은 두 개의 임계 응집 농도로써 기술할 수 있었다. 첫 번째, 사슬 내 임계 응집 농도에서는 하나의 고분자 사슬 내에서 SDS의 마이셀화 과정으로써 [SDS]/[DADMAC] 0.06 정도에서 일어나며, 이 복합체 크기는 오히려 마이셀 형성되기 직전에 최대 값을 나타내고, 마이셀이 형성된 후부터는 일부 고분자 사슬도 마이셀 형성에 참여하기 때문에 SDS 첨가에 따라 점차로 수축되기 시작하였다. 두 번째, 사슬간 임계 응집 농도는 탁도 법에 의해 [SDS]/[DADMAC] 0.5에서 측정되었고, 이 두 번째 임계 응집농도 이상에서는 많은 마이셀들로 장식된 고분자 사슬들 사이의 응집화에 의한 거대한 응집체가 형성된다.

• Corrosion Science and Technology
• /
• 제3권6호
• /
• pp.227-232
• /
• 2004

The carboxylates as a corrosion inhibitor has been studied by many researchers because of its environmental safety and low depletion rate. However, conventional test methods of inhibitor such as weight loss measurements, linear polarization resistance and corrosion potential monitoring etc., evaluate uniform corrosion of metals. These methods are unable to evaluate crevice-related corrosions, which are encountered in most of heat exchanging facilities. In order to choose the optimum corrosion inhibitor, the appropriate test methods are required to evaluate their performances in service environment. From this point of view, polarization technique was used to evaluate the characteristics of sodium heptanoate on corrosion behavior for carbon steel. Especially a thin film crevice sensor technique were applied to simulate the crevice corrosion in this study. From these experiments, we found that oxygen as an oxidizing agent was required to obtain stable passive film on the metal. Presence of oxygen, however, accelerated crevice corrosion. Potential shift by oxygen depletion and weakened inhibitive film inside the crevice were responsible for such accelerated feature. It is shown that film for corrosion inhibition is a mixture of sodium heptanoate and iron (II) heptanoate as reaction product of iron surface and sodium heptanoate. The iron (II) heptanoate which has been synthesized by reaction of heptanoic acid and ferrous chloride in methanol solution forms bidentate complex.

• 약학회지
• /
• 제39권1호
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.

• 자원리싸이클링
• /
• 제32권3호
• /
• pp.26-37
• /
• 2023

바나듐광 염배소 산물의 수침출 용액으로부터 바나듐을 회수하기 위해서는 수용액의 pH 와 온도 조절 과정이 필요한데, 이 과정에서 알루미늄-바나듐, 소듐-바나듐 공침이 일어나면서 바나듐 회수율에 큰 영향을 미친다. 그러므로 본 연구에서는 바나듐을 회수하기 위한 암모늄메타바나데이트[NH₄VO₃], 암모늄폴리바나데이트[(NH₄)₂V₆O₁₆·H₂O] 침전 과정에서 바나듐 함유 수용액 특성이 이들의 침전에 미치는 영향을 검토하여 바나듐 회수율을 높일 수 있는 회수공정에 대하여 알아보았다. 바나듐 함유 수침출 용액으로부터 암모늄메타바나데이트를 침전시키기 위하여 수용액 pH 9로 조절하는 과정에서 수용액의 알루미늄 함량은 바나듐의 손실에 많은 영향을 미치며, 따라서 수침출 과정에서 알루미늄 침출을 최소화 하는 과정이 필요하다. 수용액 pH 9, 상온에서 바나듐 함량 대비 3당량의 염화암모늄 첨가에 의하여 수용액에 존재하는 바나듐의 약 99% 이상을 암모늄메타바나데이트를 침전회수하였다. 또한 수용액 pH 9로 조절하는 과정에서 발생하는 알루미늄-바나듐 공침전물로부터 암모늄폴리바나데이트 침전를 위해서는 pH 2.5 수용액에 용해시키고, 수용액의 소듐 함량은 2,000 mg/L이하로 조절되어야 한다. 바나듐 함량 2,200 mg/L, 소듐 함량 1,875 mg/L인 수용액 pH 2.5, 온도 95℃ 이상에서 바나듐 함량 대비 약 3당량의 염화암모늄 첨가에 의하여 98% 이상의 암모늄폴리바네데이트를 침전회수하였다. 이와 같은 일괄공정 조건에서 수침출용액의 바나듐 함량 대비 약 91.2% 이상의 바나듐을 암모늄(메타, 폴리)바나데이트로 침전회수하였다.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.198-204
• /
• 1994

Chemical shifts in aqueous sodium dodecylsulfate(SDS) micellar solution solublizing phenol, catechol, resorcinol, hydroquinone have been measured to investigate solubilization properties. Proton nuclear magnetic resonance frequencies of solubilizates as well as those of the ${\alpha}$-methylene, middle methylene and terminal methyl of SDS shift linearly as a function of solubilizate concentration. From the plots of observed chemical shift (v) vs solubilizate concentration, slope (a) and solubilizate free chemical shift ($v_0$) are obtained. They are very informative to solubilization site of the systems. Catechol and phenol solubilized SDS and catechol solubilized dodecylpyridinium chloride(DPC), dodecyltrimethylammonium bromide(DTAB) systems are studied using the same method to compare head group effect and middle methylene proton signal splitting. It is proposed that phenol and catechol are inserted into micellar interior and the number of methylenes assigned to the higher field peaks is 5.0${\pm}$0.5.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.246-251
• /
• 2004

Diazotization of three aminopyridine such as 3-amino-2-chloropyridine, 5-amino-2-chloropyridine, and 3-aminopyridine were investigated. Preparation of pyridinediazonium tetrafluoroborates were carried out employing two different methods. Diazotization of aminopyridines with a chlorine substituent in the pyridine ring were conducted in acidic aqueous solution with sodium nitrite in 70% and 74% yields respectively. 3-Pyridinediazonium tetrafluoroborate without any ring subsituent was unstable in an aquous solution and the diazotiation of 3-aminopyridine was proceded in an anhydrous methylene chloride-etherial $BF_3$ solution with tert-butyl nitrite in 40% yield.