• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.211-218
• /
• 2008

The performance of positive plates depends on the structure of the lead dioxide active mass. The positive active materials (PAM) consists of a skeleton, built up of agglomerates and macropores. Agglomerates, in their turn, comprise particles and micropores. This paper described a study conducted to determine the effects of different soaking times between the acid fill and formation stages of the tubular plate production. For the positive plates a lead oxide were filled into tubular bag with a red lead. After filling the positive plates were soaked in $H_2SO_4$ solution. X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrical testing had been used to study the compositional and morphological aspects of the positive active material(PAM) just prior and after formation. Results indicate that PAM compositions were effected by the soaking time and acid density of $H_2SO_4$ solution. It can be seen that as the soaking time duration increases, $\alpha$-PbO, $Pb_3O_4$, and Pb were all gradually sulphating. Composition of 3BS reached a maximum at around 3 h duration and $H_2SO_4$ of sp. gr. 1.10 on soaking. This results would suggest that the most beneficial conditions for soaking were the $H_2SO_4$ of sp. gr. 1.10 and 2 to 6 h of soaking.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.499-500
• /
• 2009

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1535-1544
• /
• 1989

The overhang structure of photoresist in optical lithography was studied for the metallization of GaAs-related devices throughout lift-off method. Optical contact aligner with a dose of 8.5 m J/cm\ulcornerand with a wavelength of 300mm was used for ultraviolet exposure of single layer of S1400-27 photoresist. The overhang thickness shows a linear relationship with the soaking time in monochlorobenzene, which its magnitude becomes high at elevated softbake temperature. Such process conditions as a low softbake temperature, a long monochlorohbenzene soaking time and a little exposed energy make the development rate of photoresist lower. The optimum process conditions to obtain a target line-width, which include an appropriate overhang structure such as complete separation between the sidewall of photoresist pattern and the deposited metal edge, are determined as the softbake temperature of 64-74\ulcornerC, the monochlorobenzene soaking time of 10-15min, the ultraviolet exposure time of 70-100sec and the development time of 50-80sec.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.604-609
• /
• 2003

In order to investigate the transfer rate of calcium into rice and the effect of soaking conditions-temperature (20, 30, 40, 50 and $60^{\circ}C$, $X_1$), calcium concentration of soaking solution (0, 250, 500, 750 and 1000 mg/L, $X_2$) and soaking time (5, 10, 15, 20 and 25 min, $X_3$), moisture absorption rate, hardness and calcium content of rice after soaking were analyzed. When the soaking temperature and time were increased the moisture absorption rate also increased (p<0.01). Quadratic and interaction effects on the moisture absorption rate among variables were highly significant, within 5%. The predictive model for moisture absorption rate $(Y_1)$ was as follows: $Y=16.14+0.78X_1+1.24X_3-0.23X_1{^2}+0.14X_2{^2}-0.42X_3X_1-0.38X_3{^2}\;(R^2=0.9123)$. Hardness was decreased as soaking time and temperature increased. Calcium contents of soaked rice increased as temperature, the calcium concentration of soaking solution and soaking time were increased (p<0.01). Also the interactive effect between soaking time and calcium concentration of soaking solution was high. The predictive model for calcium content $(Y_3)$ was as follows: $Y_3=470.80+110.87X_1+123.47X_2+52.29X_3-7.42X_1{^2}-14.87X_2{^2}-9.49X_3X_2-20.57X_3{^2}\;(R^2=0.9840)$. From the results in this study, if adults and children take 400 g of calcium enriched rice with 600 mg/kg and $700{\sim}900\;mg/kg$, respectively, they can expect to take more calcium than the recommended intake without other calcium reinforcing agents.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.712-721
• /
• 2016

This experiment was conducted to investigate the endophytic bacterium Herbaspirillum spp effect on seed germination and sprout growth of tartary buckwheat. Inoculant concentration (%v/v) and seed soaking time were applied 10, 20 and 40% and 0, 4, 8, 12 hour, respectively. The experiment was carried out in a growth chamber maintained temperature at 20, 25 and $30^{\circ}C$ without light for 7 days. Results showed that, 10 to 20% (v/v) inoculant concentration by 4 to 8 h seed soaking time at $20^{\circ}C$ temperature increased seed vigor rate and total seed germination rate 80-95% and 90-100%, respectively. On the other and, seed inoculation with Herbaspirillum spp. increased hypocotyl length (13-15 cm), root length (8-11 cm), total fresh weight (135-296 g) and total dry weight (7-10 g), compared to control. It is indicated that sprouts growth and yield depends on inoculation concentrations, seed soaking time and temperature. Therefore, it would be suggested that seed inoculation with Herbaspirillum spp. at concentration of 10 to 20% (v/v), soaking time 4 to 8 h and temperature $20^{\circ}C$ promote seed germinations and sprout growth rate of tartary buckwheat.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.3
• /
• pp.190-197
• /
• 2019

This study investigated the luring effect of the sardine bait, which is used to catch octopus with pot, as the preliminary study for the development of alternative bait for octopus pot. The soaking time for bait was divided into "5 days or less" and "11 days or longer" The number of times octopus entered the pot with bait and the empty pot was investigated under dark adaptation and light adaptation processes and the distribution of tank section was investigated under light adaptation process. The case of "11 days or longer" sardine soaking time showed higher rate of distribution in the section of pot with bait compared to the case of "5 days or less" In the case of "5 days or less" soaking time, the number of times the octopus entered the pot with bait was similar to that it entered the pot without it even during dark adaptation and light adaptation. However, in the case of "11 days or longer", the octopus entered the pot with bait more quickly than the pot without bait and more frequently during dark adaptation hours. There were cases where the octopus did not enter any pot. In the case of "5 days or less", with less decomposition of baits, the octopus entered the empty pot more during light adaptation process, and it appeared that the pot was used as a hideout.

• Journal of Applied Biological Chemistry
• /
• v.62 no.3
• /
• pp.251-255
• /
• 2019

The effect of soaking temperature on the moisture uptake and the protein loss of soybeans during soaking process investigated. As the soaking temperature increased, the soaking rate significantly increased and Peleg model was suitable for describing the soaking characteristics of the soybean with high $R^2$ values (>0.991). The soaking time to achieve the target moisture content of soybean (130%) was estimated to be 12.6, 3.11 and 2.31 h at 25, 35 and $45^{\circ}C$, respectively. Peleg model well described the protein loss kinetics of soybean during soaking with high $R^2$ values (>0.941). The results showed that the protein loss of soybean at the target moisture content were 35.2, 93.1 and 103.0 mg/g at 25, 35 and $45^{\circ}C$, respectively. In this study, the optimum soaking condition for quality of soybean was 12.6 h of soaking time at $25^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.24 no.2
• /
• pp.188-197
• /
• 2008

This study was carried out to determine the optimal cooking conditions for various rice cultivars (Ilpoom, Saechucheong, Sindongjin, and Sura-top rice) using trial preparations with different soaking times (0, 30, and l20min) and cooking equipment (electric pressure cookers, electric cookers, gas pressure cookers, iron pots, and stone pots). In adddition, the texture and sensory characteristics of the rice prepared with the electric pressure cookers, gas pressure cookers, and stone pots were analyed. The results showed that the moisture, amylose and physicochemical compositions of the four rice varieties were similar. According to RVA, the Sura, cultivar had generally high viscosity, and the Ilpoom, cultivar presented the highest hot and peak viscosities. Saechucung had the highest initial gelatinizing temperature and Sindongjin showed the greatest setback. The optimal amounts of added water as well as heating conditons were dependent on the rice varieties, soaking times, and cooking equipment. A longer soaking time reduced the hardness of the cooked rice, amount of added water, and the heating time. The pressure cooking equipment provided the best cooked rice texture, reduced the affect of the soaking time, and decreased the heating time. In general, all the variaties of cooked rice had high overall acceptability, which tended to increase when the rice was soaked for 30min prior to cooking, had a 1.2-fold amount of water to rice added, and was cooked in the pressure equipment.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.810-817
• /
• 2013

This study investigated the properties of rice snack puffed in a microwave oven after drying its dough according to Baekjinju soaking time and additional soybean milk. The optimum conditions for the non-fried rice snack using Baekjinju wetted flour were determined through the design of an experiment using response surface methodology. The independent variables were the Baekjinju soaking time and the additional soybean milk, and the dependent variables were the weight, volume, density, expansibility, Hunter's color value, hardness, and sensory properties. The quadratic model was chosen for the weight, density, expansibility, b value, and hardness. The two-factor interaction model was chosen for the volume, flavor, appearance, and overall preference. The linear model was chosen for the L value, taste, and texture. The weight was increased to longer than 11.26 days with the increase in the rice soaking. The volume, expansibility, L value, and b value increased with the increase in the rice soaking time and in the additional soybean milk ratio. However, the density was decreased was in reverse. The hardness increased most, with the rice soaking time rising from 5.28 to 8.53 days and the soybean milk additional ratio increasing from 5.34 to 20.26%. The sensory properties improved as rice soaking time decreased, and the soybean milk additional ratio was revered. As for the desirability, the optimal formulation of the dough of non-fried rice snack was achieved by mixing 200 g of Baekjinju flour with a 0.69 days rice soaking time and a 26.67% soybean milk of rice ratio according to weight.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.511-514
• /
• 1992

The effects of soaking conditions (time and temperature) of rice on the water absorption behaviors and the consequent textural properties after cooking were investigated. Water absorption during soaking was completed in 30 min at $23^{\circ}C$, while the hydration continued up to 60 min at $4^{\circ}C$. The hardness (H) of the cooked rice decreased, while the stickiness (S) and S/H ratio increased with increased soaking time. Soaking at $23^{\circ}C$ gave higher values of S and S/H of cooked rice than soaking at $4^{\circ}C$. Soaking for $10{\sim}40\;min$ at $4^{\circ}C$ or for $10{\sim}20\;min$ at $23^{\circ}C$ resulted the value of S/H between 0.15 and 0.20, which had been found at acceptable textural parameters of the cooked rice.