• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.239-248
• /
• 2001

Far-ultraviolet IMaging Spectrograph (FIMS) is the main payload of the first Korean scientific satellite, KAISTSAT-4, which will be launched in 2002. Among the optical parts, parabolic cylinder mirror does not have any heritage from previous astronomical missions, so the manufacturing and testing process itself is a challenging issue. We describe the method of manufacturing and measuring of the off-axis parabolic cylinder mirror and our initial experiments to establish the entire manufacturing process. Using the method, the profile error can meet the specification of $lambda$ per cm which is closely related with the astronomical performances. In case of the surface roughness, temperature controlled pitch polishing reduces $R_{q}$ under 1 nm implying that scattering in the entire spectral range of FIMS is less than 2% of the incident UV light.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.123-133
• /
• 2008

This study evaluated the runoff data collected at 12 stream gauge stations of the Chungjoo dam basin using the IHACRES model. Especially, the geomorphology-related parameters of the IHACRES model could be quantified base on the regionalization technique, which have also been applied many stream gauge stations of the Chungjoo dam basin. Summarizing the results is as follows. (1) The climate-related parameters of the IHACRES model c, $\tau_w{^0}$, and f are found to be estimated and used uniformly over the basin. (2) The geomorphology-related parameters of the IHACRES model $t_q,\;t_s,\;and\;v_s$ are found to be estimated by considering the geomorphological parameters like the basin area, channel length, channel slope, basin slope through the regionalization based on the regression analysis. (3) Using the climate-related parameters applied uniformly over the basin and the geomorphology-related parameters estimated based on the regionalization procedure for each stream gauge station, a total of 12 stream gauge stations have been evaluated with their stream flow measurements. As results, the Sanganmi and Youngwal 1 stream gauge stations have been found to make high quality flow data, but Youngwal, Baekokpo, and Panwoon stations low quality flow data. On the whole, 12 stream gauge stations considered show large differences with their data quality, so a plan for securing more consistent data quality should be prepared imminently.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.8 no.2
• /
• pp.31-43
• /
• 2002

The subjects of this study were 15 woman soccer players and 15 untrained woman students at H-Cheju University. Each subject was measured on the muscle strength and peak torque of knee extensors and knee flexors with isokinetic load ($60^{\circ}$/sec, $180^{\circ}$/sec). The results were as follows: 1. There was no significant difference between right and left leg strength measured isokinetically in each group. 2. The peak torque of knee extensors and flexors was significantly higher in scoccer players than untrainded students (p<0.001). 3. For the angle of knee joint showing the highest peak torque, there was significant difference between soccer players and untrained students in knee extensors(p<0.05) and right flexors (p<0.01). 4. For knee H/Q ratio, there was significant difference between two groups(p<0.05). 5. For the total work and average power at $180^{\circ}$/sec, there was significant difference between two groups in knee extensors(p<0.001) and flexors(p<0.01). 6. In soccer players at $60^{\circ}$/sec, there were significant correlations between peak torque and height and between peak torque and weight.(p<0.001). 7. For the muscular contraction velocity at $60^{\circ}$/sec, there was significant difference between two groups in flexors (p<0.01). 8. For the muscular indurance at $180^{\circ}$/sec in extensors and flexors, there was no significant difference between two groups(p<0.05). In conclusion, there were significantly higher in peak torque, contraction velocity, knee joint's angle with the highest peak torque, H/Q ratio, total work and average power in woman scoccer player than general students. But there was no significant difference in muscular endurance. Soccer performance is based on the various components including muscular endurance that is one of the most important components. So it is necessary that the training method to improve the various components (especially including muscular endurance) should be done.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2009

In this paper, a 2.4 GHz doppler radar system consisting of a doppler radar sensor and a baseband module were designed to detect heart beat and respiration signal without direct skin contact. The doppler radar system emits RF signal of 2.4 GHz toward human chest, and then detects phase modulation of the reflected signal so as to investigate cardiopulmonary activities. The heartbeat and respiration signals acquired from I/Q channels of the doppler radar system are applied to the pre-processing circuit, the amplification circuit, and the offset circuit of the baseband module. The designed system was tested on mouse, rabbit and mankind, which have different range of heart rates and respiration signals, to evaluate detection accuracy of the system. ECG acquisition system and respiration transducer were used to generate the reference signal. In our experiments, a performance of detection were found to be high in the case that the subject stays still. In this paper, we confirmed that non-contact heart beat and respiration detection using the doppler radar has the possibility and limitation according to distance, cardiopulmonary activities, range of heart rates and respiration.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1463-1467
• /
• 2009

Telomeres, comprised of tandem repeats of TTAGGG sequences, are special nucleoprotein structures that protect and stabilize chromosome ends. These structures form the crux of the telomere concept of aging, senescence and genomic instability. The classic terminal restriction fragment (TRF) analysis to quantify the amount of telomeric DNA is disadvantageous in species containing ultra long telomeres like in mice (100Kb). In this study, we used a more sensitive quantitative fluorescence in situ hybridization (Q FISH) technique to quantify telomeric DNA, and used it as a biological aging marker in mice. 12 litters each of Senescence-Resistant (SAMR1) and -Prone (SAMP1) known as senescence accelerated mouse strains were purchased from Central Lab, Animal Inc. We quantified the amount of telomeric DNA using telomere specific DNA probes on the two strains of male mice at 8 weeks, 18 weeks and 26 weeks of age. The amount of telomeric DNA correlated with aging and age associated changes in body and organ weight between SAMR1 and SAMP1 strains of mice. These data suggest the usefulness of the amount of telomeric DNA as a biological aging marker in human aging studies.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.19-30
• /
• 2005

A coupled three-dimensional pile group analysis method was developed by considering complex behavior of sub-structures (pile-soil-cap) which included soil nonlinearity and the behavior of super-structure (pier). As an intermediate analysis method between FBPier 3.0 and Group 0.0, it took advantages of each method. Among the components of a pile group, individual piles were modeled with stiffness matrices of pile heads and soils with nonlinear load-transfer curves (t-z, q-z and p-y curves). A pile cap was modeled with modified four-node flat shell elements and a pier with three-dimensional beam element, so that a unified analysis could be possible. A nonlinear analysis method was proposed in this study with a mixed incremental and iteration techniques. The proposed method for a pile group subjected to axial and lateral loads was compared with othe. analytical methods (i.e., Group 6.0 and FBPier 3.0). It was found that the proposed method could predict the complex behavior of a pile group well, even though piles were modelled simply in this study by using pile head stiffness matrices which were different from the method introduced in FBPier 3.0.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1367-1372
• /
• 2014

As the awareness of the environmental crisis has recently increased around the world, numerous studies in the transport industry have been conducted to solve this problem through lightweight car bodies. The hot-stamping process has been presented as solution to achieve a light weight. Hot-stamping is a method that is used to obtain ultra-high strength steel (1,500 MPa or greater) by simultaneously forming and cooling boron steel in a press die after heating it to a temperature of $900^{\circ}C$ or above. This study involved a, fundamental examination of laser parameters to investigate the laser weldability of boron steel. As a result, the following optimum parameters for the shielding gas were found: Q = 20 l/min, ${\alpha}=40^{\circ}$, d = 20mm, and l = 0 mm. The hardness of butt weldment increasesed sharply as a result of martensite formation at the fusion zone.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.63-68
• /
• 2014

Manufacturing facility for non-alcoholic drink, the parts of the food industry, disposes wastewater which includes high organic concentration and low nitrogen, phosphorus concentration. For this kind of wastewater, the treatment plant consists mainly of aerobic reactor and chemical coagulation process. And sand-filter or activated carbon process is normally installed further. However, aerobic reactor must have long HRT to treat high concentration of organic contaminant included in this wastewater, so the large site area is required. And settling tank which is normally applied for wastewater treatment facility has some problems such as water quality degradation caused by the sludge spill. To solve these problems, we applied MBR system for the wastewater. And the MBR pilot plant was installed nearby the wastewater treatment facility of W food factory and operated during long term to evaluate treatment efficiency. This plant was operated about 3 months and than the result was 97% of organic removal rate on conditions of flow rate $20m^3/day$, HRT 29 hr, recycle 4Q. However, contaminant removal ratio of bio-reactor decreased and TMP of membrane increased rapidly on more conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.1-7
• /
• 2015

The photochemical characteristics were analyzed in the context of sowing time and different levels of fertilized nitrogen during the maize (Zea mays L.) growth. When maize was early sawn, the fluorescence parameters related with electron-transport, in photosystem II (PSII) and PSI, were effectively enhanced with the higher level of fertilized nitrogen. Highest values were observed in maize leaves grown in double N-fertilized plot. The photochemical parameters were declined in the progress of growth stage. In early growth stage, the fluorescence parameters were highest, and then reduced to about half of the parameters related with electron transport on PSII and PSI at middle and late growth stages. In 1/2 N plot, the photochemical energy dissipation was measured to 13% in term of active reaction center per absorbed photon resulting in decrease in performance index and driving force of electron. This decrease induced to lower the photochemical effectiveness. In 2 N plots, the electron transport flux from $Q_A$ to $Q_B$ per cross section and the number of active PSII RCs per cross section were considerably enhanced. It was clearly indicated that the connectivity between photosynthetic PSII and PSI, i.e. electron transport, was far effective.

• The Journal of Internal Korean Medicine
• /
• v.29 no.1
• /
• pp.219-230
• /
• 2008

Objectives : Consumption is a chronic wasting disease, in oriental medicine concept. Fatigue is a common symptom experienced by many people who have consumption. However, there has been little study about the relationship between consumption and fatigue in the Oriental medicine. For this reason, we attempted to investigate the present status of fatigue of outpatients, and its relation with consumption index, public health practice index, Chalder fatigue scale and Subjective Symptoms of Fatigue Test. Methods : The subjects were 149 outpatients who complain fatigue between Nov. 1, 2006 and Oct. 31, 2007. We measured degree of consumption by consumption index. We measured degree of fatigue by Chalder fatigue scale and Subjective Symptoms of Fatigue Test. Public health practice were investigated by "Breslow's 7 health practice". Results : Studies have shown that a group who disregard public health practices have higher numerical value, in part of $q\grave{i}-x\bar{u}$, $xu\grave{e}-x\bar{u}$, and Physical symptoms than a group more concerned with public health practice. A group who has fatigue for a period over 6 months are more likely to be $q\grave{i}-x\bar{u}$, $y\bar{i}n-x\bar{u}$, Chalder fatigue scale, neuro-sensory symptoms than a group fatigued for less than 6 months. Among the subjects, 81 (55.5%) were considered as 'fatigue patients' by the Chalder scale. Chalder fatigue scale, according to the Subjective Symptoms of Fatigue Test, consumption also, The more increase of Subjective symptoms of fatigue test, the more of consumption scale. Conclusions : This study has shown that there is a link between consumption and fatigue. Moreover, oriental medicine's consumption is more concrete than fatigue scale, so consumption index will have wide application to the study of fatigue.